Table of Contents
Advertisement
Operator's Manual
IMPORTANT: Read safety rules and instructions carefully before operating equipment.
Warning:
This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-
covered, brush-covered or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting
applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator.
In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have
similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized
service dealer or contact the service department, P.O. Box 368023 Cleveland, Ohio 44136-9722.
CUB CADET CORP. P.O. BOX 368023 CLEVELAND, OHIO 44136-9722
PRINTED IN U.S.A.
Model 926 STE shown
Models
724 STE
926 STE
FORM NO. 770-10008B
(6/2000)
Advertisement
Table of Contents
Related Manuals for Cub Cadet 926 STE
Summarization of Contents
Product Identification and Support
Finding Model and Serial Number
Guidance on locating and recording the snow thrower's model and serial number.
Customer Support Contact
Instructions on how to contact customer service for assistance.
Safe Operation Practices
Training and Preparation
Key safety instructions for operating the snow thrower, including training and preparation.
Maintenance and Storage
General Maintenance and Storage Guidelines
Procedures for maintaining the snow thrower and storing it properly.
Parts and Assembly
Loose Parts Identification
Identification of loose parts included with the snow thrower.
Snow Thrower Assembly Instructions
Step-by-step guide for assembling the snow thrower unit.
Assembly and Adjustments
Final Adjustments for Operation
Performing final adjustments to controls and cables for proper operation.
Know Your Snow Thrower
Control and Lever Overview
Explanation of primary controls like shift lever, auger, and traction controls.
Know Your Snow Thrower - Additional Controls
Chute, Steering, and Other Controls
Details on chute tilt, steering, fuel valve, and heated handles operation.
Operating Your Snow Thrower
Starting Procedures
Instructions for preparing the engine, filling fluids, and starting the snow thrower.
Operating Your Snow Thrower - Usage
Operation, Stopping, and Tips
Guidance on engaging drives, stopping the engine, and operational tips for efficiency.
Making Adjustments
Chute and Skid Shoe Adjustments
Procedures for adjusting chute direction and skid shoe height.
Traction Control Adjustment
Steps for properly adjusting the traction control system.
Maintaining Your Snow Thrower
Lubrication Guidelines
Detailed lubrication requirements for various snow thrower components.
Maintaining Your Snow Thrower - Wear Components
Auger, Shear Bolts, and Wear Parts
Maintenance for augers, shear bolts, shave plates, and skid shoes.
Servicing Your Snow Thrower
Belt Removal and Replacement
Instructions for replacing auger and drive belts.
Servicing and Storage
Friction Wheel Servicing
Procedure for servicing the friction wheel rubber for optimal performance.
Off-Season Storage Instructions
Guidelines for safely storing the snow thrower during the off-season.
Troubleshooting Guide
Common Problems and Solutions
Diagnosing and resolving common issues with the engine and operation.
Parts List and Diagrams
Component Identification and Part Numbers
Diagrams and lists of all snow thrower parts with their respective numbers.
Manufacturer's Limited Warranty
Warranty Coverage and Limitations
Details on residential and commercial warranty coverage, and items not covered.
Obtaining Service and Legal Rights
How to obtain service and information on state-specific legal rights.
Need help?
Do you have a question about the 926 STE and is the answer not in the manual?
Questions and answers