11720
9/10/2009
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH:
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
WARNING: ALL NON-TRAILER LOADS APPLIED TO THIS PRODUCT MUST BE SUPPORTED BY AUXILIARY STABILIZING STRAPS.
** FAILURE TO PROPERLY SUPPORT NON-TRAILER LOADS WILL VOID PRODUCT WARRANTY**
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT
Parts List
ITEM
QTY
PART NUMBER
DESCRIPTION
1
6
7/16-14 x 1 1/2
CARRIAGE BOLT
2
6
7/16-14
HEX NUT
3
6
7/16
HELICAL LOCK WASHER
4
6
7/16
WASHER
5
1
CM-438-FW
7/16 " FISHWIRE TOOL
6
6
CM-SP113
.188 x 1.25 x 1.25 SPACER
DRIVER SIDE
FRAME RAIL
HITCH WEIGHT:
27
LBS.
INSTALL TIME
60
PROFESSIONAL:
MINUTES
120
NOVICE (DIY):
MINUTES
INSTALL NOTES:
-DRILLING REQUIRED
-FISHWIRE HARDWARE
INSTALLATION STEPS
1. Locate existing holes in the driver and passenger frame rails that hitch will mount to.
2. Use the hitch as a template and mark the remaining holes for 7/16" fasteners (1) place on each
frame beam as shown.
3. Use 1" hole saw to drill access hole on inside of both frame rails as shown.
4. Fishwire fasteners through access holes into position. Carefully position hitch over fasteners being careful
to not push hardware into frame rail.
5. Torque all 7/16" fasteners to 50 lb-ft.
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
24578 / 247239
93-97 FORD PROBE
2,000
DRILLED ACCESS HOLE
1
6
4
3
2
LBS. TRAILER WEIGHT &
200
1-800-798-0813
(BOTH SIDES)
5
DESIGNED FOR USE WITH
BALLMOUNT #55001 / 45501
LBS. TONGUE WEIGHT.
PASSENGER SIDE
FRAME RAIL
Need help?
Do you have a question about the 11720 and is the answer not in the manual?
Questions and answers