curt 14029 Manual

14029
9/22/2020
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH:
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH:
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
Parts List
ITEM QTY PART NUMBER
1 6 CM-SP1 .250 x 1.50 x 2.00" SQUARE HOLE SPACER
2 6 20-00062 NUT, SER-FLANGE,1/2-13 UNC,GRD8,YZ
3 1 1_2 FISHWIRE 1/2" FISHWIRE
4 6 10-10272 BOLT,CAR,1/2-13 UNC,1-3/4,GRD8,YZ
FRAME RAIL
HITCH WEIGHT: 37 LBS.
30
INSTALL TIME: MINUTES
INSTALL NOTES:
ENLARGE EXISTING HOLES TO 1/2"
INSTALLATION STEPS
1) Install fasteners as shown. Some models may require mounting hole to be reamed out to 1/2".
2) Installations on boxed-in frames will be made easier by fishwiring the bolts and spacers into the holes from
an existing access hole. Wrap a wire around the threads of the bolt at the end and pull wire, bolt, and spacers
back through the access hole through the attachment hole.
3) Raise the hitch into position, taking care not to push bolts back into frame. The large slot on each side fits
over the rivet. Secure each bolt with a flange nut.
4) Torque all hardware to 110 lb.-ft.
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
DESCRIPTION
1
92-00 CHEV/GMC SUBURBAN,YUKON,TAHOE,
99-02 ESCALADE, 92-96 CHEVY FULL SIZE BLAZER
10,000 LBS. TRAILER WEIGHT &
12,000
LBS. TRAILER WEIGHT &
1,000 LBS. TONGUE WEIGHT.
1,200
LBS. TONGUE WEIGHT
EXISTING HOLE
2