Table of Contents
Advertisement
Alamo Industrial mowers use balanced and matched system components for blade carriers, blades,
cuttershafts, knives, knife hangers, rollers, drivetrain components, and bearings. These parts are made and
tested to Alamo Industrial specifications.
specifications. The use of "will fit" parts may reduce mower performance, void mower warranties, and present
a safety hazard. Use genuine Alamo Industrial mower parts for economy and safety.
Be sure you have adequate knowledge of the property you will be working on. Take time to
make yourself aware of any area underground lines or cables. Contact with buried lines
or cable could result in serious injury or death.
In wet conditions where there is a likelihood of material collecting on the Implement, make
certain that this material is removed before traveling on public roadways.
Storage and Parking Safety Instructions and Practices
To prevent tipping of Implement when stored in folded position, use carrying wheels or
adequate stands on center frame.
Concluding Safety Instructions and Practices
In addition to the design and configuration of this Implement, including Safety Signs and Safety Equipment,
hazard control and accident prevention are dependent upon the awareness, concern, prudence, and proper
training of personnel involved in the operation, transport, maintenance, and storage of the machine. Refer
also to Safety Messages and operation instruction in each of the appropriate sections of the Tractor and
Equipment Manuals. Pay close attention to the Safety Signs affixed to the Tractor and Equipment.
RX60/72/84 03/09
© 2009 Alamo Group Inc.
SAFETY
PARTS INFORMATION
Non-genuine "will fit" parts do not consistently meet these
SEE YOUR ALAMO DEALER
(S3PT-6)
Safety Section 1-15
(SPRM-1)
(STL-1)
(STL-7)
(SG-18)
Advertisement
Table of Contents
