Table of Contents
Advertisement
•
Perform scheduled lubrication as detailed in
the maintenance section.
•
Ensure all decals are in place and legible.
•
Ensure the driveline is securely attached to
tractor. Make sure the driveline yoke locking
collar is securely seated in the grooves of the
PTO shaft by pushing and pulling the yoke
several times.
•
Lift Type-Inspect that the 3-point hitch pins are
the proper size, correctly installed, and secured
to the tractor lift arms with retaining pins
inserted.
•
Pull Type-Inspect that the hitch pin is the
correct size. OPS-R-0008_E
•
Ensure deflectors and/or chainguards are in
position and not damaged. Replace worn,
broken, and missing pieces. OPS-R-0068
All Safety Shields, Guards and Safety devices including (but not
limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox
Shields, PTO integral shields, and Retractable Door Shields should
be used and maintained in good working condition.
devices should be inspected carefully at least daily for missing or
broken components.
replaced at once to reduce the possibility of injury or death from
thrown objects, entanglement, or blade contact.
RX60/72/84 03/09
© 2009 Alamo Group Inc.
OPERATION
Missing, broken, or
worn items must be
Operation Section 4-24
All safety
(SGM-3)
Advertisement
Table of Contents
