Makita DTW1005Z Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Power Tool
  5. DTW1005Z
  6. Instruction manual
Makita DTW1005Z Instruction Manual

Makita DTW1005Z Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
Cordless Impact Wrench
DTW1005
Read before use.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DTW1005Z and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Makita DTW1005Z

Summary of Contents for Makita DTW1005Z

  • Page 1 INSTRUCTION MANUAL Cordless Impact Wrench DTW1005 Read before use.

  • Page 2: Specifications

    SPECIFICATIONS Model: DTW1005 Fastening capacities Standard bolt M12 - M33 High tensile bolt M10 - M24 Square drive 19.0 mm No load speed (RPM) Max impact mode (4) 0 - 1,800 min Hard impact mode (3) 0 - 1,000 min Medium impact mode (2) 0 - 900 min Soft impact mode (1)

  • Page 3: Safety Warnings

    Only for EU countries NOTE: The declared vibration total value(s) has been Ni-MH Due to the presence of hazardous com- Li-ion measured in accordance with a standard test method ponents in the equipment, waste electrical and may be used for comparing one tool with another. and electronic equipment, accumulators NOTE: The declared vibration total value(s) may also and batteries may have a negative impact...
  • Page 4 Do not expose power tools to rain or wet con- Zealand, it is legally required to wear a face ditions. Water entering a power tool will increase shield to protect your face, too. the risk of electric shock. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
  • Page 5 result in personal injury. Make sure there are no electrical cables, water pipes, gas pipes etc. that could cause a hazard Battery tool use and care if damaged by use of the tool. Recharge only with the charger specified by Do not carry the tool by holding the impact the manufacturer.

  • Page 6: Functional Description

    Only use genuine Makita batteries. Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. Tips for maintaining maximum Fig.1 battery life ► 1 .

  • Page 7: Overload Protection

    Before installing the battery car- If no improvement can be found by restoring protection tridge into the tool, always check to see that the system, then contact your local Makita Service Center. switch trigger actuates properly and returns to Indicating the remaining battery the "OFF"...

  • Page 8: Forward/Reverse Switch

    This tool is equipped with an electric brake. If the tool has been lost if not. consistently fails to quickly stop after the switch trigger is released, have the tool serviced at a Makita service NOTE: When the tool is overheated, the front lamps center.

  • Page 9: Changing Operation Mode

    Changing operation mode The tool features multiple application modes for efficient bolt/nut fastening and torque control. Select an appropriate mode according to your preferences and needs. Application modes can be switched for approximately 1 minute(s) after you release the switch trigger. You can extend the hold time for 1 more minute(s) by pressing the button NOTE: The LED display on the control panel goes off to save the battery power while the tool is switched off.
  • Page 10 Indication Mode Max. Max. rota- Target torque Features Application blows tion speed (N·m) (min (RPM) (min 2 (Medium) Auto-stop 1,600 50 - 150 Secures the initial fixing to Primary fastening. prevent loss of clamping (Secondary retention) force or displacement of fastening components. Stops automatically Allows to fasten bolts/nuts approximately 0.2 second with the required torque in...
  • Page 11 Fig.8 Indication Mode Max. Max. rota- Target torque Features Application blows tion speed (N·m) (min (RPM) (min Impact 2,200 1,800 1,700 Maximum speed, blows Unfastening operation that (Free- and torque can be requires a dynamic pow- range) obtained. er-speed range control. 1/2/3 Auto-stop 2,200...

  • Page 12: Installing Hook

    Installing hook ASSEMBLY WARNING: Use the hanging/mounting parts CAUTION: Always be sure that the tool is for their intended purposes only, e.g., hanging the switched off and the battery cartridge is removed tool on a tool belt between jobs or work intervals. before carrying out any work on the tool.

  • Page 13: Operation

    The ring is convenient for hanging the tool with hoist. Proper fastening torque for high tensile bolt with First, place the rope through the ring. Then hang the max impact mode (4) tool up to the air with hoist. N•m (kgf•cm) 1200 (12236)

  • Page 14: Maintenance

    Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual.
  • Page 16 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885B13-228 20250123...

This manual is also suitable for:

Dtw1005

Table of Contents