Download Print this page
Epson SureColor F1000 Manual
Epson SureColor F1000 Manual

Epson SureColor F1000 Manual

Dtg / dtf printer, printing on t-shirt

Advertisement

Quick Links

Epson SureColor F1000
DTG / DTF Printer
Printing on T-Shirt

Advertisement

loading
Need help?

Need help?

Do you have a question about the SureColor F1000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Epson SureColor F1000

  • Page 1 Epson SureColor F1000 DTG / DTF Printer Printing on T-Shirt...
  • Page 2 Open your le in Garment Creator 2. Recommented Color mode is RGB. These are supported le forms. In Print Settings choose a suitable pro le. (Use Garment Black means that black ink Choose T-shirt. is not applied, so it is the base of the T-shirt.)
  • Page 3 In Layout Settings you can scale, t to plate, rotate and ip the image. If you have a landscape image, turn it counterclockwise 90 degrees. Printing on white fabric Choose from Print setting presets Light colour T-Shirt.
  • Page 4 Heat press the shirt in 175C° few seconds. Take the frame from print bed and place it Wrap the shirt on top of the frame. where you want our picture to be printed.
  • Page 5 Place the frame and shirt to print bed. (If you have a landscape image and it is turned Turn the package 180 degrees so that counterclocwise in Garment Creator, the neckline points downwards. place the neckline on the opposite side.) Notice that the image on printer display point the opposite side than the shirt on print bed.
  • Page 6 Heat press the image in 175C° for 45 seconds. REMEMBER to use baking paper to Print is done. protect the image.
  • Page 7 Printing on black and colored fabrics if white colour is used Pre-treatment liquid needs to be applyed...
  • Page 8 Pre-treatment liquid Pre-treatment liquids are used to create a bond between the fibers and the ink, by filling in the spaces between the weaving of the fabric. 1. Heat press the fabric 175 C° and 5 sec. This step will help remove excess moisture from the fabric and smooth the surface, so that your print won’t have any wrinkles.
  • Page 9 Take the frame from print bed and place Wrap the shirt on top of the frame. Turn it where you want the picture to be the package 180 degrees so that the printed. neckline points downwards. Place the frame and shirt to print bed. (If youhave a landscape image and it is turned counterclockwise in Garment Creator, place Level the surface of the fabric with this tool.
  • Page 10 Notice that the image on printer display point the opposite side than the shirt on print bed. Start print by pressing "Start" button. Heat press the image in 175 C for 45 seconds. REMEMBER to use baking Print is complete. paper to protect the image.
  • Page 11 Printing on Film...
  • Page 12 Open your le in Garment Creator 2. Recommented Color mode is RGB. These are supported le forms. Choose a suitable pro le. (Use Garment Black means that black ink is not applied, so it is the base of the T-shirt.) Choose Film.
  • Page 13 In Layout Settings you can scale, t to plate, rotate and ip the image. Spray some water to the glass bed Place the on the bed. Water will hold it on place.
  • Page 14 Colours will be printed rst. Then white. Place the lm on the bottom of the plastic box and sprinkle the hot melt powder Dry the bottom of the lm on hand towel. on the printed areas .
  • Page 15 Move the powder on the lm back and forth and pour extra powder o . Place the film to Siser heat press (make sure the upper plate doesn´t touch the powder) in 200C° about 5 minutes, until the melted powder looks like orange skin. Let the film cool down.