Download Print this page

Burrow HARVEST Assembly Instructions

Download this manual

HARVEST

Assembly Instructions

Need help?

Do you have a question about the HARVEST and is the answer not in the manual?

Page 1 HARVEST Assembly Instructions...
Page 2: Parts And Hardware
Parts and hardware Thanks for bringing Burrow into your home. Everything we make is incredibly simple Lay the two tabletop halves upside-down on Check that the screws and washers to set up, including your new dining table. the ﬂoor, ideally a carpet or a soft surface are in order: the lock washer should be You’ll need an extra set of hands, so be sure...
Page 3 Fit the protruding ends of the extension rails With both halves of the tabletop ﬂush Use the remaining four short screws to Flip the table upright, and you’re all set! Or, into the right tabletop half, then push the two with each other, press the switches on the attach the sled to the rails, tightening each you’re set if you only have four chairs at the...
Page 4 Lower the leaf over the rails, and push both Reach under and press the switches closed halves of the table back together, to make to lock the sliding mechanism. Now you’re sure the edges are ﬂush. really ready for company! Tip: To store the leaf when it’s done, stick it in its protective bag, separate the table again and set it upside-down in the sled,...
Page 5: Need Help
Need help? Feel free to contact us via email or text if you have any specific questions! In the USA: support@burrow.com (224) 628-7769 In Canada: support.canada@burrow.com (343) 313-1223...