Burrow Totem Bench Assembly Instructions

Assembly
Instructions
Thanks for bringing Burrow into
your home.
Everything we make is incredibly
simple to set up, including your
new bench. You won't need any
tools, but having an extra set of
hands to help flip will be useful.
Feel free to contact
support@burrow.com with any
specific questions!
Everything you need
is included:
1 x
Bench
2 x
Support Legs
1 x
Cross Beam
4 x
Thumbscrews
1
Place the main bench body upside
down on a soft surface, like a rug or
the cardboard box. Then, lower the
crossbeam in between the two
built-in supports, with the dovetails
on the ends flat against the base of
the bench body.
4
With another person to help,
flip the bench upright so it is
standing on its legs. Be careful
while flipping the bench, as
the lid may open.
2
Next, slide in each of the support
legs by inserting the dovetail on
the ends of the crossbeam into
the grooves on the insides of the
legs. They should rest in place.
5
Place the finished bench in your room!
Don't forget tag @burrow or use the
hashtag #myburrow if you post a photo
on Instagram.
@burrow
3
Secure the legs and the cross-
beam to the bench body by
screwing the included thumb-
screws into the four holes on the
outside of the support legs. Turn
the thumbscrews clockwise until
they are tight.