Download Print this page

OfficeSource OSTADJMDB4872 Assembly Manual

Adjustable beam

Advertisement

Quick Links

This assembly manual contains important safety information. Please read and keep for future reference.
Useful Hints Before You Start
Necessary Tools
Phillips
Screwdriver
Distributed exclusively by COE Distributing!
Model No.:
Description:
Flat Head
Hammer
Screwdriver
Customer Service
Tel: 800-388-8202 (Mon-Fri | 9am-5pm EST.)
OSTADJMDB4872
Adjustable Beam
CAUTION – Risk of product damage!
Power Drill can be used on lowest
torque setting.

Advertisement

loading
Need help?

Need help?

Do you have a question about the OSTADJMDB4872 and is the answer not in the manual?

Questions and answers

Summary of Contents for OfficeSource OSTADJMDB4872

  • Page 1 Customer Service Tel: 800-388-8202 (Mon-Fri | 9am-5pm EST.) This assembly manual contains important safety information. Please read and keep for future reference. Model No.: OSTADJMDB4872 Description: Adjustable Beam Useful Hints Before You Start Necessary Tools Phillips Flat Head Hammer CAUTION – Risk of product damage!
  • Page 2 Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. Parts List OSTADJMDB(2x) OSTCBBEV(2x) OSTLEG(2x) OST Top(1x) (Sold Separately) (Sold Separately) (Sold Separately) Hardware List Wood Screw*20mm(16x) CSK Bolt M6x16mm(1x) Bolts M6Xx2mm(16x) Center Support Block(1x) Distributed exclusively by COE Distributing!
  • Page 3 Note: Failure to install the Center Support Block(4) may cause top to bow. Bottom View Note: Failure to install all 3 Bolts(3) could lead to bowing of top. MB=Main Desk Beam RM=Return Beam 1. Slightly loosen Bolt(2) on the Center Support Block(4) and rotate the block by 90 degrees, then tighten the bolt.
  • Page 4: Suction Cup

    2. Lock the suction cup with a washer, and M6 nut from the bottom of the beam. If installing with adjustable 4. Slightly screw in the M6 screw from the bottom of beam OSTADJMDB4872 the small suction cup in the the bracket and check the alignment. center does not need locking.
  • Page 5: Care And Maintenance

    Care & Maintenance Distributed exclusively by COE Distributing!