Subscribe to Our Youtube Channel
Related Manuals for Prowinch PWN67is
Summary of Contents for Prowinch PWN67is
- Page 1 ® Reg. U.S. TM. O . PWN67is Pneumatic Winch User’s Manual / Manual de usuario Safety Warnings / Advertencias de seguridad...
- Page 2 This page intentionally left blank...
-
Page 3: Table Of Contents
Index Disclaimer ........................................ Safety Bulletin......................................5 Safety Precautions ....................................9 Winch Safety Precautions ..................................10 Before Using the equipment ..............................During Operation ..................................11 Inspection, Maintenance and repairs ............................. 11 Warnings....................................Specifications ......................................13 Troubleshooting ....................................... 17 Version 1.0... -
Page 4: Disclaimer
User Manual and Security Warnings corresponding to the unit purchased. In this sense, Prowinch® LLC will not be liable for accidents and / or damages to persons and / or property resulting from the negligent use of the product. In no case does Prowinch® LLC assume any liability arising from the use of these voluntary rec- ommendations, and does not offer any guarantee in relation to them. -
Page 5: Safety Bulletin
” In order to ensure Safety and installation requirements Prowinch requires Load Tests to be performed prior to initial use for all Hoists, Winches and Cranes, as well as other related components. - Page 6 Safety Bulletin (c) Guide governments and other regulatory bodies in the development, promulga- tion, and enforcement of appropriate safety directives. The equipment covered by the B30 Standard is subject to hazards that cannot be abat- ed by mechanical means, but only by the exercise of intelligence, care, and common sense.
-
Page 7: Daily Checklist
Safety Bulletin B30.26 Rigging Hardware. B30.27 Material Placement Systems. B30.28 Balance Lifting Units. B30.29 Self-Erecting Tower Cranes. B30.30 Ropes. DO NOT 1. DO NOT Operate, install, or repair the hoist unless trained and authorized. 2. DO NOT Operate the hoist unless you have first read the operator’s manual. 3. - Page 8 Safety Bulletin WIRE ROPE: Check for broken wires, broken strands, kinks, and deformation or damage to the rope structure. CHAIN: Check for corrosion, wear, elongation, twist, nicks, or gouges. Keep Chain/ Wire Rope Clean and Lubricated. REEVING: Check the rope for proper reeving and that rope parts are not twisted. LIMIT SWITCHES: Ensure that all limit devices stop lifting motion before the load block or chain/rope stop strikes the hoist.
-
Page 9: Safety Precautions
Safety Precautions Thank you for purchasing our Prowinch® Recovery Winch. This User Manual provides important information for personnel involved with the installation, operation, and maintenance of this product. Read this User Manual before installing, operating, or maintaining the product. 1. SAFETY PRECAUTIONS The Prowinch®... -
Page 10: Winch Safety Precautions
Safety Precautions 1.1. Winch Safety Precautions WARNING: This symbol indicates unsafe practices or situations which may cause damage to the property and even injuries to the personnel. DANGER: This symbol indicates a potentially dangerous situation which if not avoided may cause severe injuries or death All operators and other users who are near the wire rope or its load must wear required safety equipment: gloves, safety helmet / hard hat, safety shoes, and eye... -
Page 11: During Operation
• Only trained and authorized personnel may perform repairs on the equipment. • Use only original ProWinch® parts. The use of any other part immediately voids the warranty. • Failure to use only original ProWinch® parts may create dangerous conditions for the operator. -
Page 12: Warnings
Safety Precautions WARNINGS 1. Operators should first carefully read through the Service 7. Never disengage clutch with a load on the wire rope. Winch Manual, then start the operation after good command of controls must be in the neutral position before operating the operation regulation. -
Page 13: Specifications
Specifications 2. SPECIFICATIONS 2.1. Load Level and Service Life Operational Time Ratings at K = 0.65 Uniformly Distributed Infrequent Work Work Periods Periods Hoist Duty Typical Areas of Application Max. Max. On Class Max. No. No. Time Max. No. Time, Starts/hs From Cold of Starts... - Page 14 Specifications Maintenance Expected Life [Working Hours] Working Conditions Load Time Interval 800 1600 3200 6300 12500 (Months) Light Mechanisms subjected normally to light Light 6 - 12 loads and very rarely to the maximum load. Mechanisms subjected normally to moderate Normal <...
- Page 15 Specifications Maintenance for use 1. Drain the water of the filter (in the air source system) before everyday use. 2. The tick marked parts should be filled with lubrication oil or Calcium grease twice every week. 3. The lubricator should be filled with N32 lubrication oil regularly, but within the tick mark. 4.
- Page 16 Specifications Version 1.0...
-
Page 17: Troubleshooting
Troubleshooting Issue Cuase Solutions 1. Leakage in the air pipelines. 2. No lubrication oil in the lubricator or 1. Find the leakage, and seal it. low oil admittance. 2. Fill lubrication oil in time or Low power; 3. Piston ring and cylinder sleeve are enlarge the oil admittance. - Page 18 Cl. 163a #20-28, Bogotá, Colombia United States +57 1 7034035 +1 (800) 971-8061 Proveedora Industrial y Tecnica, S.A. de C.V. Equipos de Izaje Prowinch Chile Spa www.prointe.com.sv Av. Alberto Masferrer Sur, Col. Campestre No. 211 www.prowinch.cl San Salvador, El Salvador...
Need help?
Do you have a question about the PWN67is and is the answer not in the manual?
Questions and answers