Download Print this page

LuxenHome WHF1955 Instruction Manual

Gray resin column and bowl sculpture outdoor fountain with lights

Advertisement

Quick Links

Product Name:
Gray Resin Column and Bowl Sculpture Outdoor Fountain with Lights
SKU #:
WHF1955
Thank you for purchasing this LuxenHöme product. This product has been manufactured with the highest
standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Please make sure to unpack all the components from the packaging inside the carton to ensure that there are
no missing or damaged parts. Do not attempt to assemble or use the product if any parts are missing or
damaged.
CARTON CONTENTS:
Description
Planter
Fountain
Pump
Compatible Pumps for this fountain:
Pump Model No.
JR450/LED
Tools required for assembly: No tools are required for assembly.
ASSEMBLY INSTRUCTIONS:
1. Unpack the box's contents and check to ensure that all items are accounted for and in good condition.
2. Remove the pump from the package and untie the power cord.
4. Connect the water supply tube inside the fountain to the water pump. ①
3. Select a flat, level surface for your fountain's assembly and final location.
5. Connect the pump adapter to the LED cord and twist it to tighten the connection. ② Place the pump
6. Connect the power cord to the transformer. ③
upright in the back of the fountain opening.
7. Add clean water into the reservoir. ④
Note: The water level should be approximately 30mm lower than the reservoir's edge. Ensure the pump in
8. Connect the power cord from the pump to a properly grounded, grounding-type receptacle (GFCI). ⑤
your fountain is completely submerged in the water.
9. If installed properly, water flow in the fountain will begin shortly.
10. Adjust the flow rate (if applicable) to the maximum (+) position. If necessary, readjust the flow rate to the
desired level (remember to always disconnect from the power source before handling the pump).
11. Please do not use the electrical plug during wet weather conditions. Please note: There may be air in the
pump on first use. It may take several minutes until all the air escapes.
Quantity
1
1
1
Instruction Manual
SAVE THESE INSTRUCTIONS–This manual contains important
safety and operating instructions for power units.

Advertisement

loading
Need help?

Need help?

Do you have a question about the WHF1955 and is the answer not in the manual?

Questions and answers

Summary of Contents for LuxenHome WHF1955

  • Page 1 Product Name: Gray Resin Column and Bowl Sculpture Outdoor Fountain with Lights SKU #: WHF1955 Thank you for purchasing this LuxenHöme product. This product has been manufactured with the highest standards of safety and quality. PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
  • Page 2 Instruction Manual SAVE THESE INSTRUCTIONS–This manual contains important safety and operating instructions for power units. Product Name: Gray Resin Column and Bowl Sculpture Outdoor Fountain with Lights SKU #: WHF1955 Note: The above diagram is for illustrative purposes only.
  • Page 3 Product Name: Gray Resin Column and Bowl Sculpture Outdoor Fountain with Lights SKU #: WHF1955 MAINTENANCE OF YOUR PUMP: Keep the water clean – clean water will prolong the life of your pump. •...
  • Page 4 Product Name: Gray Resin Column and Bowl Sculpture Outdoor Fountain with Lights SKU #: WHF1955 WARNINGS: To reduce the risk of electric shock, connect only to a properly grounded, grounding-type receptacle. • To reduce the risk of electric shock, use only on portable self-contained fountains no larger than 5 feet in •...