LuxenHome WHF1953 Instruction Manual

Product Name: Solar Powered Pink Flower 2-Tier Resin Birdbath Fountain with Lights
SKU #: WHF1953
Thank you for purchasing this LuxenHöme product. This product has been manufactured with the highest
standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Please make sure to unpack all the components from the packaging inside the carton to ensure that there are
no missing or damaged parts. Do not attempt to assemble or use the product if any parts are missing or
damaged.
CARTON CONTENTS:
Description
Fountain Top
Fountain
Pump
Compatible Pumps for this fountain:
Pump Model No.
P018A3
Tools required for assembly: No tools required assembly.
Tools required for assembly: No tools are required for assembly.
ASSEMBLY INSTRUCTIONS:
1. Unpack the box's contents and check to ensure that all items are accounted for and in good condition.
2. Remove the pump from the package.
3. Select a flat, level surface for your fountain's assembly and final location.
4. Place the pump inside the top of the fountain's reservoir ①.
5. Connect the water supply tube ② and solar power connection ③ to the pump.
6. Place the fountain top on the fountain and add clean water into the reservoir ④.
7. Note: the water level should be approximately 30mm lower than the reservoir's edge. Ensure the pump in
your fountain is completely submerged in the water. On first use, there may be air in the pump. It may take
several minutes until all the air escapes.
8. Allow the solar panel to charge for 6-8 hours in full sun.
SAVE THESE INSTRUCTIONS–This manual contains important
Quantity
1
1
1
Instruction Manual
safety and operating instructions for power units.