thomann Harley Benton CPT-20 Quick Start Manual

CPT-20
Safety instructions
Intended use
This device is used for the tuning of musical instruments. Any other use or use under
other operating conditions is considered to be improper and may result in personal
injury or property damage. No liability will be assumed for damage resulting from
improper use.
This device may be used only by persons with sufficient physical, sensory, and
intellectual abilities and the necessary knowledge and experience. Other persons
may use this device only if they are supervised or instructed by a person who is
responsible for their safety.
Risk of injury and choking hazard for children!

Children can suffocate on packaging material and small parts. Children can
injure themselves when handling the device. Never allow children to play
with the packaging material and the device. Always store packaging materi-
al out of the reach of babies and small children. Always dispose of packaging
material properly when it is not in use. Never allow children to use the device
without supervision. Keep small parts away from children and make sure
that the device does not shed any small parts (such as knobs) that children
could play with.
Risk of death from electrical current!

The device contains parts where high voltage is present. Never remove any
covers. There are no user-serviceable parts inside the device. Do not use
the device if covers, safety equipment or optical components are missing
or damaged.
Features
• Chromatic floor tuner for a wide range of applications
• Brushed metal
• LED/LCD display for easy readability of the exact measurement results
• "True Bypass" wiring for completely undistorted signal routing
Connections and controls
ö #
(
$ %
&
'
Quick start guide
This document contains important information on the safe use of the product.
Read and follow the safety instructions and all other instructions. Keep the docu-
ment for future reference. If you pass the product on to others, please include this
document.
Contents are subject to change. Please refer to the latest version of the documenta-
tion, which is available for download at www.thomann.de.
Damage to the device if operated in unsuitable ambient conditions!

The device can be damaged if it is operated in unsuitable ambient condi-
tions. Only operate the device indoors within the ambient conditions spec-
ified in the "Technical specifications" chapter of this user manual. Avoid op-
erating it in environments subject to direct sunlight, heavy pollution and
strong vibrations. Avoid operating it in environments with strong tempera-
ture fluctuations. If temperature fluctuations cannot be avoided (for exam-
ple after transport in low outside temperatures), do not switch on the device
immediately. Never subject the device to liquids or moisture. Never move
the device to another location while it is in operation. In environments with
increased dirt levels (for example due to dust, smoke, nicotine or mist): Have
the device cleaned by qualified specialists at regular intervals to prevent
damage due to overheating and other malfunctions.
General handling
To prevent damage, never exert force while operating the device. Never immerse
the device in water. Wipe only with a clean and dry cloth. Do not use liquid cleaners
such as benzene, thinners or flammable cleaning agents
Keep foreign substances away from the device!
Keep the device away containers with liquid. If any liquid penetrates the device,
this could destroy the device or cause a fire. Ensure that no metallic parts enter the
device.
1 [b] | LED for flat notes
2 [9 V ] | Connection for the power supply
3 [] | LED for notes with correct tuning
4 [#] | LED for sharp notes
5 [INPUT] | Input connection, designed as 6.35 mm jack socket
6 [BYPASS] | "True Bypass" switch for activating the tuning function
7 [OUTPUT] | Output connection, designed as 6.35 mm jack socket
EN