Subscribe to Our Youtube Channel
Related Manuals for Giandel PS-3000PBR
Summary of Contents for Giandel PS-3000PBR
- Page 1 Model: PS-3000PBR International application No. PCT/CN2023/131406 Warning: This manual contains important safety and operating instruction. Please read it carefully before use the unit. V0.24.12...
-
Page 2: Specifications
1. SPECIFICATIONS 2. INTRODUCTION The VOLTWORKS power inverter product line is used for back-up power. The Item Data power inverter transforms DC (direct current) electricity into AC (alternating Input voltage 12VDC current) power that can be used for running a wide variety of tools and appliances. Continuous power 3000W This inverter is perfect for providing mobile power in cars, boats and work trucks. -
Page 3: Warning And Safety
3. WARNING AND SAFETY ● Do not expose the unit under direct sunlight or get close to heat ● For first-time use or reuse after a long-term storage , please keep the sources. Do not use the unit in rain or damp inverter working without load for 30 minutes to 1 hour to pre-charge the environments.The normal working capacitors, which will help extend the product's lifespan. - Page 4 ● Do not disassemble the unit ● The lithium battery usually has randomly: it may cause fire or its own protection voltage which electric shock. This device may be different with inverter’s. should only be serviced by a The battery usually shuts down qualified technician.
-
Page 5: Parts List
● Inverter support battery types 4. PARTS LIST (1. DC Input Side) Inverter Version 12V Inverter 24V Inverter Battery type Positive of DC input(+) Negative of DC input(-) 11.1V 22.2~25.9 22.2V Voltage 11.1V 11.1V 3.7V 3.7V 3.7V 3.7V 3.7V 3.7V 3.7V 3.7V 3.7V... - Page 6 (3. Remote controller box) (6) It is recommended that the product be unloaded for half an hour before use, and products stored for more than 3 months should also be unloaded for half an hour before being loaded. This is to better protect the product's service life.
- Page 7 Mounting Directions: The inverter can be mounted to a suitable horizontal or vertical panel. Please keep 8" (20cm) adequate ventilation space for the cooling fan. If you mont the inverter vertically, please keep the DC terminals side downward. Battery Within 2m (6.56ft) Battery INVERTER 3) Installation of remote control box...
-
Page 8: Volt Battery
6. VOLT BATTERY Inverter Inverter Max Current Battery for Battery for Batteries for Rating power lasting 1 hour lasting 2 hours Version N hours 1. Current and voltage Nx70AH 600W 1000W Nx115AH The battery is used to supply the DC input voltage required by the product, 1200W Nx140AH and its rated voltage must be in line with the rated input voltage of the inverter,... - Page 9 a. The battery cannot be fully charged when the inverter is working, and the charging voltage ripple will affect battery life. b. While charging battery, the ripple voltage and current are large, and the input voltage and current are unstable, which will affect the working efficiency of the inverter and easily damage the product.
- Page 10 (7) Take away the metal accouterment, such as ring or watch, while installing to Specification of Specification of Specification of Inverter input Max current Rating power wire length≤1m wire length (1m-2m) wire length≤N m voltage of cable avoid the short circuit. (Cross section area) (Cross section area) (Cross section area)
- Page 11 8. USAGE OF INVERTER 4. Working temperature display (F1/F2): 1. Fahrenheit temperature: Click the ON/OFF button to display F1 and switch 1. Preparation before use: to Fahrenheit temperature display. Click the ON/OFF button again to return 1) Check the output voltage and capacity of the battery, which should meet the to AC voltage display.
- Page 12 3) After entering the settings, it will enter the parameter adjustment state and 8. Automatic shutdown function of buzzer protection alarm: flash to display the current low voltage protection value being adjusted. By After protection, it will beep for 1 minute and stop beeping. clicking on ON/OFF button, it can be cyclically adjusted between 9.5-11.5V.
- Page 13 Comparing with Modified wave form, for inductive loads such as refrigerator ● Light up the first bar icon> set protection voltage (default 9.5V)+0.3V and electric fans, pure sine wave form can improve its power factor and the ● Light up the second bar icon≥ 11.5V battery's efficiency and reduce working noises effectively from appliances.
-
Page 14: Troubleshooting Tips
6. DC high voltage overvoltage abnormal protection(HVH): Code conditions 14. TROUBLESHOOTING TIPS displayed: PROBLEM REASON SOLUTIONS (1) 230V product, when the DC high voltage exceeds DC500±30V; ● Recharge the battery ● Battery may be too small. Please refer to (2) Auxiliary power supply abnormal, alarm mode: the buzzer sounds an instruction for recommended battery sizes. -
Page 15: Warranty
Except as noted above, GIANDEL makes no warranty of any kind, express or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose. In no event shall GIANDEL be liable for indirect, special or consequential damages. This warranty only applies to GIANDEL branded products.
Need help?
Do you have a question about the PS-3000PBR and is the answer not in the manual?
Questions and answers