Giandel PS-2200KAR User Manual

Giandel PS-2200KAR User Manual

Pure sine wave dc to ac power inverter

Advertisement

MODEL: PS-2200KAR

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PS-2200KAR and is the answer not in the manual?

Questions and answers

Summary of Contents for Giandel PS-2200KAR

  • Page 1 MODEL: PS-2200KAR...
  • Page 2: Specifications

    A. INSTRUCTION fire. The GIANDEL Power inverter product line is used for back-up power. The pure sine 14) Disconnect the battery and inverter when not in use. product line is ideal for sensitive equipment and provides clean power, which is more efficient for back-up power applications.
  • Page 3: Installation

    Remote controller box Positive of DC Nagative of DC input(+) input(-) 4. INSTALLATION Ensure there is enough space for the installation, and the location should be meet the following requirements: 1. Water should not access the inverter. 2. The ambient temperature should be 32~104°F, and the preferred temperature is 50- 77°F.
  • Page 4 2). Assemble the remote control box specification is 12V, 200Ah capacity and the load is 1000W. Take battery capacity 200Ah / 91.6 amps = 2.18 hours of run time if you fully deplete the battery. This is 54mm NOT recommended. Deep cycle batteries last longer when they are only depleted to 50% of capacity.
  • Page 5 7. USING THE POWER INVERTER 3. OL means the inverter is in overload protection or short-circuits protection. 1. Check the output voltage and capacity of the battery. The battery (s) should match the 4. OH means the inverter is in OVER HEAT protection. voltage of the inverter and have enough capacity for the load.
  • Page 6: Troubleshooting Tips

    1. Cut off the load and allow to cool for fitness for a particular purpose. In no event shall GIANDEL be liable for indirect, 10 to 30 minutes. Restart after it special or consequential damages.

Table of Contents

Save PDF