Changing A Cycle Or Setting - Haier DWL7075MBSS User Manual

SPARENT SMOKE
PANTONE COOL GRAY 9C
CANCELLING A CYCLE
X16)
Anytime during a cycle, press
Your dishwasher will start a 2-minute drain (if needed). Let the dishwasher drain
completely. The light turns off after 2 minutes.
NOTE: If your dishwasher does not need draining, press START/RESET again to
turn the light turns off. Select a new cycle and options.
To stop the drain
You can press START/RESET again to stop the drain immediately. Remember to
drain the dishwasher before starting a new cycle.
To clear the indicators
Press START/RESET before starting the dishwasher to clear all options and cycles.
QUALITY
SYMBOLS

CHANGING A CYCLE OR SETTING

0
=
C
= 0
During the first fill of a cycle
1. Press a new cycle and/or options.
DRAFT WHERE APPLICABLEP
2. Check the detergent dispensers.They must be filled properly for the new cycle.
MUST REMAINP
WITHIN DIMENSIONS
1
After the first fill of a cycle
3
1. Press
Your dishwasher will start a 2-minute drain (if needed). Let the dishwasher drain
completely. The light turns off after 2 minutes.
NOTE: If your dishwasher does not need draining,press START/RESET again to
turn the light off.
1. Check the detergent dispensers. They must be filled properly for the new cycle.
2. Press a new cycle and/or options.
ENERAL TOLERANCESP
UNLESS SPECIFIED)
mm
INCH
DRAWN BY
CES
Michael
CES
CHECKED BY
CES +0.25
CE +0.75
APPROVED BY
ANGULAR +0.1
MATERIAL NO.
FT WHERE APPLICABLEP
T REMAINP
SIZE
IN DIMENSIONS
A2
PANTONE 1805C
GENERAL TOLERANCESP
(UNLESS SPECIFIED)
mm
INCH
DRAWN BY
4 PLACES
3 PLACES
CHECKED BY
2 PLACES +0.25
1 PLACE
+0.75
APPROVED BY
+0.1
ANGULAR
MATERIAL NO.
DIMENSION STYLE SCALE
mm 1:1
DATE
TITLE
2009/07/06
DATE
DATE
molex
DOCUMENT NO.
SEE NOTES
THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX
INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
2
DIMENSION STYLE SCALE
mm 1:1
DATE
TITLE
Michael 2009/07/06
DATE
DATE
molex
DOCUMENT NO.
SEE NOTES
SIZE
THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX
A2
INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
2
DESIGN UNITS
THIRD ANGLEPPROJECTION
mm
GRAPHIC OVERLAY
MOLEX INCORPORATED
E-160XX-101
1
E
D
DESIGN UNITS
THIRD ANGLEPPROJECTION
mm
GRAPHIC OVERLAY
MOLEX INCORPORATED
E-160XX-101
C
1
B
A
SHEET NO.
1 OF 1
English
C
B
A
SHEET NO.
1 OF 1
20