Canceling A Cycle; Changinga Cycle Or Setting - Haier DWL7075MBSS User Manual

24" built-in dishwasher
Hide thumbs Also See for DWL7075MBSS:
Table of Contents

Advertisement

Available languages

Available languages

CANCELLING A CYCLE
Anytime during a cycle, press
_ES_T
Your dishwasher will start a 2-minute drain (if needed). Let the dishwasher drain
completely. The light turns off after 2 minutes.
NOTE: If your dishwasher does not need draining, press START/RESET again to
turn the light turns off. Select a new cycle and options.
To stop the drain
You can press START/RESET again to stop the drain immediately. Remember to
drain the dishwasher before starting a new cycle.
To clear the indicators
PressSTART/RESET b efore starting the dishwasher to clear all options and cycles.
CHANGING
A CYCLE OR SETTING
During
the first fill of a cycle
1. Press a new cycle and/or options.
2. Check the detergent dispensers.They must be filled properly for the new cycle.
After
the first fill of a cycle
1. Press
_:_/,,u
Your dishwasher will start a 2-minute drain (if needed). Let the dishwasher drain
completely. The light turns off after 2 minutes.
NOTE: If your dishwasher does not need draining,press
START/RESET again to
turn the light off.
1. Check the detergent dispensers. They must be filled properly for the new cycle.
2. Press a new cycle and/or options.
20

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Dwl7075dbwwDwl7075dbbb

Table of Contents