Setting Up For Use Over Wired Lan - Canon PIXMA MP600R Setup Manual

Setting up for use over wired LAN

This section describes how to set up the machine to be used over wired LAN.
Important
Follow this procedure only when the machine has not yet been set up to be connected to a wired
LAN. If the machine has already been connected to a wired LAN, see "Setting up an additional
LAN-connected computer" on page 39.
1
On the Setup Method screen, select Set up
the printer/scanner and the computer and
click Next.
Important
This step should follow from step 4 in "Installing the
Software" on page 24. If the Setup Method screen
has not displayed yet, go back to the procedure in
"Installing the Software" on page 24 to complete the
installation of the software.
2
When the screen shown on the right appears,
connect the machine with a USB cable.
Note
To set up the machine that is not yet connected to a
LAN, connect to it with a USB cable.
Setting Up the Machine and the Computer (Windows) 33