1. Manuals
  2. Brands
  3. HikRobot Manuals
  4. Barcode Reader
  5. IDH9000
  6. User manual

HikRobot IDH9000 User Manual

Wired handheld code reader
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IDH9000 Wired Handheld Code Reader
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IDH9000 and is the answer not in the manual?

Questions and answers

Related Manuals for HikRobot IDH9000

Summary of Contents for HikRobot IDH9000

  • Page 1 IDH9000 Wired Handheld Code Reader User Manual...

  • Page 2: Legal Information

    EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKROBOT BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...

  • Page 3: Regulatory Information

    EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. THE PERFORMANCE DATA IN THIS PUBLICATION IS BASED ON HIKROBOT'S INTERNAL RESEARCH/EVALUATION. ACTUAL DATA MAY VARY DEPENDING ON SPECIFIC CONFIGURATIONS AND OPERATING CONDITIONS AND HIKROBOT SHALL NOT BEAR THE CONSEQUENCES ARISING THEREFROM.

  • Page 4: Symbol Conventions

    Provides additional information to emphasize or supplement Note important points of the main text. Available Model This manual is applicable to the IDH9000 wired handheld code reader. Contact Information Hangzhou Hikrobot Co., Ltd. E-mail: global.support@hikrobotics.com Website: https://en.hikrobotics.com/...

  • Page 5: Table Of Contents

    IDH9000 Wired Handheld Code Reader User Manual Contents Chapter 1 Safety Instruction ..................1 1.1 Safety Claim ........................1 1.2 Safety Instruction ......................1 1.3 Electromagnetic Interference Prevention ..............2 1.4 Laser Product ......................... 3 Chapter 2 Overview ...................... 4 2.1 Introduction ........................
  • Page 6 IDH9000 Wired Handheld Code Reader User Manual 6.3 Set Setting Codes of Data Processing ............... 24 6.4 Set Setting Codes of Code Reading ................28 6.4.1 Code Type ......................28 6.4.2 Code Reading Mode ..................31 6.4.3 Code Reading Quantity ..................31 6.4.4 Code Color ......................
  • Page 7 IDH9000 Wired Handheld Code Reader User Manual 9.3 Code Algorithm Settings ..................... 58 9.3.1 Add Code ......................58 9.3.2 Set Algorithm Parameter.................. 59 9.4 Signal Input Settings ....................60 9.4.1 Set and Execute Software Tigger ..............60 9.4.2 Set and Execute Button Tigger ................ 61 9.4.3 Set and Execute Serial Port ................
  • Page 8 IDH9000 Wired Handheld Code Reader User Manual 11.4 Reading Window Cleaning ..................85 Chapter 12 FAQ (Frequently Asked Question) .............. 86 12.1 Why there is no buzzer sound and the indicator is unlit after the device is connected? ........................86 12.2 Why the device does not read codes after powering on and getting triggered? .

  • Page 9: Chapter 1 Safety Instruction

    IDH9000 Wired Handheld Code Reader User Manual Chapter 1 Safety Instruction The safety instructions are intended to ensure that the user can use the device correctly to avoid danger or property loss. Read and follow these safety instructions before installing, operating and maintaining the device.

  • Page 10: Electromagnetic Interference Prevention

    IDH9000 Wired Handheld Code Reader User Manual otherwise the image sensor will be damaged. ● It is forbidden to touch the image sensor directly. If necessary, please moisten a soft clean cloth with 75% or less alcohol and gently wipe off the dust. When the device is not in use, please add a dust cover to protect the image sensor.

  • Page 11: Laser Product

    IDH9000 Wired Handheld Code Reader User Manual ● Use the power adapter to supply power to the device separately. If centralized power supply is necessary, make sure to use a DC filter to filter the power supply of the device separately before use.

  • Page 12: Chapter 2 Overview

    Chapter 2 Overview 2.1 Introduction The IDH9000 wired handheld code reader adopts code reading algorithm to provide good decoding capability for codes with spots, defects, and low contrast ratio. It has illumination system to provide different types of lighting. The code reader also adopts OLED display for quick viewing of the device and code information, and supports smart tune and quick configuration of code parameters.

  • Page 13: Chapter 3 Appearance

    9: Button 2: Tigger Switch 8: Vibrator 4: Network Interface 3: Cable Figure 3-1 Appearance of Device Polarized Wide-Angle Lens Lighting Green Light Direct Lighting Telephoto Lens Diffused Red Light Reflection Lighting Figure 3-2 Appearance of Reading Window (MV-IDH9000/13HHD Device)
  • Page 14 IDH9000 Wired Handheld Code Reader User Manual Figure 3-3 Appearance of Reading Window (Other IDH9000 Devices) Table 3-1 Component Description Name Description It is used to acquire images, and consists of lens, lighting, aiming system, ToF, etc. Reading Window Note Do not look directly at the laser beam from the reading window.
  • Page 15 IDH9000 Wired Handheld Code Reader User Manual Name Description screen, and then press the trigger switch to confirm the information.

  • Page 16: Chapter 4 Screen And Indicator

    IDH9000 Wired Handheld Code Reader User Manual Chapter 4 Screen and Indicator 4.1 Screen You can view device status and code reading result on the screen, and operate functions such as parameter configuration, smart tune, and scanning mode. Note ● You can press the button to switch menu or options on the screen, and then press the trigger switch to confirm the information.

  • Page 17: Scanning Mode

    IDH9000 Wired Handheld Code Reader User Manual If the result is “Failed”, you can return or try again. Scanning Mode You can press the trigger switch to select the scanning mode. Table 4-1 Scanning Mode Code Reading Mode Description It reads codes that are closest to the cross laser Common Mode center only.

  • Page 18: System Information

    IDH9000 Wired Handheld Code Reader User Manual Parameter Description Note Only the USB type device supports the USB mode. After this parameter is enabled, a carriage return will be Enter Character added at the last of the output code. After this parameter is enabled, a newline will be added Newline Character at the last of the output code.

  • Page 19: Device/Component Status And Indicator

    IDH9000 Wired Handheld Code Reader User Manual 4.2 Device/Component Status and Indicator 4.2.1 Device/Component Status Device Status Table 4-3 Device Status Device Status Description The device will automatically start up after device is powered Power On The device will automatically shut down after device is Power Off powered off.

  • Page 20: Indicator

    IDH9000 Wired Handheld Code Reader User Manual Component Status Description smart tune is succeeded. ● The buzzer beeps once with low-frequency long beeps when the smart tune is failed. ● The buzzer beeps for 1 second with high frequency and then emits low-frequency long beeps when code reading is succeeded and communication failed.
  • Page 21 IDH9000 Wired Handheld Code Reader User Manual Solid Green (device Successful Firmware Upgrade restarting after 3 seconds) Failed Smart Tune Smart Tune Successful Smart Tune Green...

  • Page 22: Chapter 5 Quick Start Guide

    IDH9000 Wired Handheld Code Reader User Manual Chapter 5 Quick Start Guide The basic operation flow includes unboxing, connection, code reading, and debugging. 5.1 Device Unboxing Refer to the table below for the included device and accessories in the package.

  • Page 23: Device Connection

    IDH9000 Wired Handheld Code Reader User Manual 5.2 Device Connection The device each has two types, including USB type and fast Ethernet type. Refer to sections below to connect the corresponding device type. Note The images of cables below are for reference only.

  • Page 24: Usb Type Device

    IDH9000 Wired Handheld Code Reader User Manual Handheld Code Reader Connect to PC or Switch Connect to Device Power Adaptor Figure 5-2 Connection of Fast Ethernet Type Device 5.2.2 USB Type Device Steps 1. Refer to the figure below. Push component 3 until the component 1 ejects, insert the RJ45 connector into the component 2, and then push component 1 into the device again.

  • Page 25: Code Reading

    IDH9000 Wired Handheld Code Reader User Manual Note If you want to remove the cable, follow the above steps to push component 3 and pull out the cable. 2. Connect the USB interface to the PC for data transmission. 3. Connect the DC power connector to the power adapter for power supply.
  • Page 26 Figure 5-6 Minimum Code Reading For other IDH9000 devices, place the code inside the aiming frame and align the aiming line to the center of the code for reading.

  • Page 27: Debugging

    IDH9000 Wired Handheld Code Reader User Manual successfully. 5.4 Debugging The device supports configuring parameters via reading special codes that are called setting codes and debugging in the client. Debugging via Setting Code The setting code consists of three parts.
  • Page 28 Smart Code Reader Industrial Protocol on the official website for connection. 3. In the Normal mode, click to start acquisition. The device is in smart scanning mode, which allows lens switch according to the scene (only for the MV- IDH9000/13HHD device), auto polling of light source, and data recording.
  • Page 29 IDH9000 Wired Handheld Code Reader User Manual Note During the image debugging, you can change the running mode to Test to obtain the image and code information output by the device. 4. View the code reading time, code type, code content, code length, and other code-related information in the History at the bottom of the client.

  • Page 30: Chapter 6 Setting Codes

    IDH9000 Wired Handheld Code Reader User Manual Chapter 6 Setting Codes Via reading setting codes, the device can set enable/disable settings, set code type, set code reading mode, set quantity of code reading, set data processing, set aiming system, set light source, set buzzer, set vibration, set USB communication, set serial port, etc.

  • Page 31: Serial Port Communication

    IDH9000 Wired Handheld Code Reader User Manual Table 6-2 Set Setting Codes of USB Communication Function Setting Codes Function Setting Codes Enable USB Disable USB Communication Communication USB HID USB CDC Communication Communication Mode Mode Compound Keyboard Mode Mode 6.2.2 Serial Port Communication The setting codes of serial port can enable or disable serial port function, set the baud rate, parity bit, and stop bit.

  • Page 32: Set Setting Codes Of Data Processing

    IDH9000 Wired Handheld Code Reader User Manual Function Setting Codes Function Setting Codes Set Baud Set Baud Rate Rate as as 38400 19200 Set Baud Set Baud Rate Rate as as 115200 57600 Set None Set Odd Parity Parity Set Even...
  • Page 33 IDH9000 Wired Handheld Code Reader User Manual Table 6-4 Setting Codes of Editing Prefix or Suffix Function Setting Codes Function Setting Codes Edit Prefix Edit Suffix 2. Set prefix and suffix characters according to actual demands, find the corresponding hexadecimal code value in ASCII table (see Appendix A ASCII Table for details), and read the corresponding digital codes.
  • Page 34 IDH9000 Wired Handheld Code Reader User Manual Function Setting Codes Function Setting Codes Digital Code 6 Digital Code 7 Digital Code 8 Digital Code 9 Digital Code a Digital Code b Digital Code c Digital Code d Digital Code e Digital Code f 3.
  • Page 35 IDH9000 Wired Handheld Code Reader User Manual Table 6-6 Setting Codes of Data Processing Function Setting Codes Function Setting Codes Edit Clear Separator Separator Enable Edit Stop Text Newline Disable Enable Enter Newline Enable Disable Enter Horizontal Disable Horizontal 5. Read the setting codes of saving to save the parameter settings.

  • Page 36: Set Setting Codes Of Code Reading

    IDH9000 Wired Handheld Code Reader User Manual 6.4 Set Setting Codes of Code Reading 6.4.1 Code Type The device can be set what code type to be read via reading specific setting codes. Currently, the device supports Code 39, Code 93, Code 128, CodeBar, ITF 25, ITF 14, EAN 8, EAN 13, UPCA, UPCE, QR Code, Data Matrix, MicroQR, AZTEC, and PDF417.
  • Page 37 IDH9000 Wired Handheld Code Reader User Manual Function Setting Codes Function Setting Codes Enable Code Disable Code Enable Disable CodeBar CodeBar Enable ITF 14 Disable ITF 14 Enable ITF 25 Disable ITF 25 Enable EAN 8 Disable EAN 8 Enable EAN...
  • Page 38 IDH9000 Wired Handheld Code Reader User Manual Function Setting Codes Function Setting Codes Enable UPCA Disable UPCA Enable UPCE Disable UPCE Enable QR Disable QR Code Code Enable Data Disable Data Matrix Matrix Enable Disable MicroQR MicroQR Code Code Enable...

  • Page 39: Code Reading Mode

    IDH9000 Wired Handheld Code Reader User Manual Function Setting Codes Function Setting Codes Enable PDF Disable PDF 6.4.2 Code Reading Mode The device supports setting different code reading modes via scanning setting codes, including common mode, accurate mode, continuous mode, batch mode, and HHD mode.
  • Page 40 IDH9000 Wired Handheld Code Reader User Manual shown below. Steps 1. Read setting codes of editing code reading quantity. Figure 6-2 Edit Code Reading Quantity 2. Read the corresponding digital codes according to actual demands. Note ● The code reading quantity is supported when the code reading mode is batch mode.

  • Page 41: Code Color

    IDH9000 Wired Handheld Code Reader User Manual Function Setting Codes Function Setting Codes Digital Code 6 Digital Code 7 Digital Code 8 Digital Code 9 3. Read the setting codes of saving to save the parameter settings. Figure 6-3 Setting Codes of Saving 6.4.4 Code Color...

  • Page 42: Set Setting Codes Of Trigger

    IDH9000 Wired Handheld Code Reader User Manual 6.5 Set Setting Codes of Trigger The setting codes of trigger can let the device switch the trigger mode, including button trigger, self-trigger, response trigger, serial port trigger, software trigger, ToF trigger, and support disabling trigger mode.
  • Page 43 IDH9000 Wired Handheld Code Reader User Manual Function Setting Codes Function Setting Codes Trigger Trigger Distance: 50 Distance: 75 Trigger Trigger Distance: 100 Distance: 125 Trigger Trigger Distance: 150 Distance: 175 Trigger Distance: 200 Sensitivity of Response Trigger Sensitivity: Sensitivity: Low...
  • Page 44 IDH9000 Wired Handheld Code Reader User Manual Function Setting Codes Function Setting Codes Unrespond Unrespond Time: 300 ms Time: 500 ms Unrespond Unrespond Time: 1000 Time: 800 ms Unrespond Unrespond Time: 3000 Time: 2000 ms Timeout Duration of Response Trigger...

  • Page 45: Set Setting Codes Of Aiming System

    Only the MV-IDH9000/13HHD device supports the green aiming settings. For the MV- IDH9000/13HHD device, you can scan code of enabling aiming system to enable the red light and disable the green light, scan code of disabling aiming system to disable all lights, scan code of enabling green aiming system to enable red and green lights, and scan code of disabling green aiming system to disable green light.

  • Page 46: Set Setting Codes Of Buzzer

    IDH9000 Wired Handheld Code Reader User Manual Table 6-14 Set Setting Codes of Light Source Function Setting Codes Function Setting Codes Enable Enable Bi- Diffused Directional Reflection Lighting Lighting Enable Enable Direct Polarized Lighting Lighting 6.8 Set Setting Codes of Buzzer The setting codes of buzzer can enable or disable the buzzer function, set its duration, etc.

  • Page 47: Set Setting Codes Of Vibration

    IDH9000 Wired Handheld Code Reader User Manual Function Setting Codes Function Setting Codes Set Buzzer Set Buzzer Duration 80 Duration 100 Set Buzzer Set Buzzer Duration 120 Duration 150 Set Buzzer Set Buzzer Duty Ratio 25% Duty Ratio 50% Set Buzzer Duty Ratio 75% 6.9 Set Setting Codes of Vibration...

  • Page 48: Set Setting Codes Of Sending Device Information

    IDH9000 Wired Handheld Code Reader User Manual Function Setting Codes Function Setting Codes Set Vibration Set Vibration Duration 100 Duration 200 Set Vibration Set Vibration Duration 300 Duration 500 Set Vibration Set Vibration Duration 1000 Duration 2000 ms 6.10 Set Setting Codes of Sending Device Information...

  • Page 49: Set Setting Codes Of Management

    IDH9000 Wired Handheld Code Reader User Manual Function Setting Codes Function Setting Codes Get Serial Number 6.11 Set Setting Codes of Management The setting codes of management can save or initialize user parameters, and restart the device. Table 6-18 Set Setting Codes of Management...

  • Page 50: Chapter 7 Client Software Installation And Operation

    IDH9000 Wired Handheld Code Reader User Manual Chapter 7 Client Software Installation and Operation 7.1 Install Client Software IDMVS is a client software for device configuration and remote operations. Steps Note ● The client software is compatible with 32/64-bit Windows XP/7/10/11.

  • Page 51: Set Pc Environment

    IDH9000 Wired Handheld Code Reader User Manual 7.2 Set PC Environment To ensure stable client running and data transmission, you are recommended to set PC environment. For the fast Ethernet type device, you need to turn off the firewall and set PC network.

  • Page 52: Check Usb Drive For Usb Type Device

    IDH9000 Wired Handheld Code Reader User Manual 1. Go to PC network settings page: Start → Control Panel → Network and Internet → Network and Sharing Center → Change adapter settings. 2. Select NIC and set the IP obtainment mode.

  • Page 53: Connect Device To Client Software

    IDH9000 Wired Handheld Code Reader User Manual network segment with the PC where the client software is installed. Steps 1. Double click the client software to run it. 2. Click to find the device. 3. Right click the device to be connected.
  • Page 54 IDH9000 Wired Handheld Code Reader User Manual display it. Figure 7-5 Main Window Note ● The specific interfaces of the client software may differ by its versions. ● Refer to the user manual of the client software for detailed introductions and operations.
  • Page 55 IDH9000 Wired Handheld Code Reader User Manual Figure 7-6 Device Configuration Area Table 7-2 Configuration Area Description Module Name Description You can connect or disconnect device, modify device IP Device Connection address, view device information, etc. Image Settings You can set image parameters, light parameters, etc.

  • Page 56: Chapter 8 Device Mode Settings

    IDH9000 Wired Handheld Code Reader User Manual Chapter 8 Device Mode Settings The device supports 3 types of running modes, including Test, Normal, and Raw. You can select different modes in live view window according to actual demands. Note ● Stopping the real-time acquisition is required before selecting modes.

  • Page 57: Chapter 9 Device Settings

    IDH9000 Wired Handheld Code Reader User Manual Chapter 9 Device Settings 9.1 Feature Tree Introduction Note The feature tree may differ by device models. Figure 9-1 Feature Tree Table 9-1 Feature Tree Description Module Name Description Device Control You can view device information, edit its name, restart it, etc.

  • Page 58: Image Quality Settings

    IDH9000 Wired Handheld Code Reader User Manual Module Name Description Image Setting You can set exposure, gain, Gamma, frame rate, etc. Read Setting You can set the device running mode and select code types. Algorithm Control You can set algorithm parameters of codes.
  • Page 59 After selection, the image settings will be valid for the selected channel. Note Only the MV-IDH9000/13HHD device supports the Channel Selector. Exposure Time(μs) You can increase exposure time to improve image brightness.
  • Page 60 IDH9000 Wired Handheld Code Reader User Manual It includes Only Smart, Only User, and Smart And User. Only Smart: Polling is executed according to the general code reading logic. It cannot be configured. Only User: Polling is executed according to the original polling parameters. It can be configured.
  • Page 61 IDH9000 Wired Handheld Code Reader User Manual Figure 9-2 Set Image Go to Feature Tree → Image Setting to set other parameters. Average Rate of Algorithm Identify It refers to the absolute value of the maximum allowable acquisition frame rate. The absolute value is a floating-point value that represents the maximum acquisition frame rate based on the current settings that the exposure time and bandwidth are configured.

  • Page 62: Set Screen Control

    IDH9000 Wired Handheld Code Reader User Manual Figure 9-3 Image Settings in Feature Tree 9.2.2 Set Screen Control Screen control allows you to set screen-related parameters according to actual demands. Screen Enable If it is enabled, the device screen can be used.

  • Page 63: Set Smart Tune

    Note ● Only the MV-IDH9000/13HHD device supports the Minimum Code Aiming(red + green). ● For the MV-IDH9000/13HHD device, the Minimum Code Aiming(red + green) is enabled by default. If the Minimum Code Aiming(red + green) is disabled, the Standard Aiming(red) will be displayed.
  • Page 64 IDH9000 Wired Handheld Code Reader User Manual You can select High Quality and High Speed. ○ High Quality: If you select this mode, exposure will be adjusted in priority. The acquired picture will have a smaller gain and noise, which makes a higher picture quality. It is suitable for objects with a slow moving speed.

  • Page 65: Set Focus Parameter

    IDH9000 Wired Handheld Code Reader User Manual 9.2.5 Set Focus Parameter The global focus allows you to adjust lens focus in a global field of view just by once. Note It is recommended to set the following parameters when the device running mode is Test.

  • Page 66: Set Other Parameters

    IDH9000 Wired Handheld Code Reader User Manual 5. Click Execute in FocusPositive / FocusNegative Execute to increase/decrease the focus distance by the value set for Focus Step. 6. (Optional) Select the position parameter from Focus Position. 7. Click Execute in Auto Focus Start, and the device starts to adjust focus automatically.

  • Page 67: Set Algorithm Parameter

    IDH9000 Wired Handheld Code Reader User Manual time. Note that selecting more symbologies or adding more codes may consume more time to recognize codes in the image. ● The code reader may output actual code number when the mismatch between the actual code number and the code number set in the client software occurs.

  • Page 68: Signal Input Settings

    IDH9000 Wired Handheld Code Reader User Manual Waiting Time(ms) Waiting time refers to the maximum running time of algorithm, and its unit is ms. The code reader will stop parsing the images and return results if the time is exceeded the waiting time configured.

  • Page 69: Set And Execute Button Tigger

    IDH9000 Wired Handheld Code Reader User Manual 3. Select Software as Trigger Source. 4. Click Execute in Trigger Software to send trigger commands. 5. (Optional) Enter Auto Trigger Time, and then enable Enable Auto Trigger to let the client software automatically send trigger signal to device according to the interval you set.

  • Page 70: Set And Execute Serial Port

    IDH9000 Wired Handheld Code Reader User Manual ○ Trigger Activation: You can select Level High. And Start Delay Time and End Delay Time should be set. ○ Start Delay Time: Specify the delay for the code reader to acquire images after receiving trigger signals.

  • Page 71: Set And Execute Self Tigger

    IDH9000 Wired Handheld Code Reader User Manual Figure 9-13 Set and Execute Serial Port Trigger 9.4.4 Set and Execute Self Tigger Self trigger allows you to trigger the device according to the trigger period you configured. Steps 1. Go to I/O Control Settings → Input → Trigger Mode.

  • Page 72: Set And Execute Response Tigger

    IDH9000 Wired Handheld Code Reader User Manual Figure 9-14 Set and Execute Self Trigger 9.4.5 Set and Execute Response Tigger When the change of the brightness exceeds the configured trigger sensitivity, the code reading and code output will be triggered automatically.

  • Page 73: Set And Execute Tof

    IDH9000 Wired Handheld Code Reader User Manual 9.4.6 Set and Execute ToF When the changes of the distance between the code reader and the object exceeds the set threshold, the code reader is triggered to acquire images. Steps 1. Go to I/O Control Settings → Input → Trigger Mode.

  • Page 74: Set Usb

    Selector corresponds to the wide-angle lens on the left and the telephoto lens on the right. Note Only the MV-IDH9000/13HHD device supports the Output Channel Selector. Output Channel If it is enabled, the device will output data in corresponding channel Enable via SmarkSDK.

  • Page 75: Serial

    IDH9000 Wired Handheld Code Reader User Manual parameters. Table 9-4 TCP Client Communication Protocol Parameter Description TCP Protocol If it is enabled, the device will output data via the TCP/IP. TCP Dst Addr Enter the IP address of the PC that receives data.

  • Page 76: Ftp

    IDH9000 Wired Handheld Code Reader User Manual 9.5.5 FTP If FTP is selected as the Communication Protocols, you can configure the following parameters. Table 9-6 FTP Communication Protocol Parameter Description FTP Protocol If it is enabled, the device will output data via the FTP.

  • Page 77: Ethernet/Ip

    IDH9000 Wired Handheld Code Reader User Manual 9.5.8 Ethernet/IP If Ethernet/IP is selected as the Communication Protocols, you can configure the following parameters. Table 9-9 Ethernet/IP Communication Protocol Parameter Description Ethernet/IP Enable If it is enabled, the device will output data via the Ethernet/IP.

  • Page 78: Udp

    IDH9000 Wired Handheld Code Reader User Manual Parameter Description Note When the ModBus Mode is Client, this parameter can be set. ModBus Control It refers to the control address space, and is holding_register by Space default. ModBus Control It refers to the control address offset, and is 0 by default.

  • Page 79: Code Reading Result Settings

    IDH9000 Wired Handheld Code Reader User Manual 9.6 Code Reading Result Settings In Data Processing module, you can set filter rules for reading codes and other related parameters. 9.6.1 Set Filter Rule You can set rules to filter unwanted codes to improve the reading efficiency in Filter Rule.
  • Page 80 IDH9000 Wired Handheld Code Reader User Manual which contain more than 9 characters. History Filter Mode You can select Time-based and Quantity-based. Time-based: Set Filter Time(ms). Duplicate codes are filtered within the set time range. Quantity-based: Set Max. History Code Number. The codes are filtered when the maximum number of history codes is reached.
  • Page 81 IDH9000 Wired Handheld Code Reader User Manual Figure 9-16 Normal Mode Regular Expression Mode When the filter mode is Regular Expression, you can follow the steps below to set parameters. Steps 1. Select Regular Expression as the Filter Mode, and click Set in Regular Expression Filter to enter regular expression filter settings window.
  • Page 82 IDH9000 Wired Handheld Code Reader User Manual Figure 9-17 Regular Expression Filter Settings ● Add customized filter rule: Click Add and set related parameters in the popped-up window, and click OK after configuring parameters. Note Up to 10 filter rules can be added.
  • Page 83 IDH9000 Wired Handheld Code Reader User Manual Table 9-12 Filter Rule Parameters Parameter Description Rule Name The default rule name is Rule1, and cannot be edited. Length Limit It sets the length range of the code, and its upper limit is 2048.
  • Page 84 IDH9000 Wired Handheld Code Reader User Manual 3. After setting filter rule, enter the code in Code Check to check if the filter rule is successful. Figure 9-19 Code Check Note If the filter rule you configured is correct, the result is valid. Otherwise, it is invalid.

  • Page 85: Set Result Format

    IDH9000 Wired Handheld Code Reader User Manual maximum number of history codes is reached. The default value is 20, and the range is 1 to 20. Note The History Filter Mode is available when the trigger is closed. If the trigger is on, you can enable De-duplication Enable By Trigger to filter duplicate codes within specific trigger times that you set in De-duplication Windows Size.
  • Page 86 IDH9000 Wired Handheld Code Reader User Manual Result Output via Smart SDK When the communication protocol is Smart SDK, device running mode is Normal, and trigger mode is On, there is no need to set any parameters in the Data Processing.
  • Page 87 IDH9000 Wired Handheld Code Reader User Manual Select a format type from the drop-down list for the time stamp contained in the file name. Figure 9-20 Result Output via FTP Figure 9-21 FTP Output Settings Result Output via TCP Client, TCP Server, Serial, MELSEC, Profinet,...
  • Page 88 IDH9000 Wired Handheld Code Reader User Manual ** Output NoRead Enable If it is enabled, the device will output the content you set in ** Output NoRead Text when no code is recognized. ** Output Start Text It refers to the contents of the start part of the data output. You can set the contents according to actual condition.

  • Page 89: Chapter 10 Other Operations

    IDH9000 Wired Handheld Code Reader User Manual Chapter 10 Other Operations 10.1 View Log You can view the device logs and export them to the local PC. Click in control toolbar to open the device log window, and you can view different types of logs, including device errors, warning, and informational log, etc.

  • Page 90: Set Time

    IDH9000 Wired Handheld Code Reader User Manual Figure 10-2 View Device Information 10.3 Set Time After enabling NTP time synchronization, the device will synchronize time according to the configured interval. Steps 1. Go to Device Connection, and click Timing. 2. Set parameters according to actual demands.
  • Page 91 IDH9000 Wired Handheld Code Reader User Manual Figure 10-3 Set NTP Timing...

  • Page 92: Chapter 11 Device Maintenance

    IDH9000 Wired Handheld Code Reader User Manual Chapter 11 Device Maintenance 11.1 Update Firmware The device supports updating firmware via the client software. Note ● Disconnect the device with client software. ● Please use the firmware package of the corresponding device model for upgrading.

  • Page 93: Reading Window Cleaning

    IDH9000 Wired Handheld Code Reader User Manual alcohol, chlorinated hydrocarbon, benzene, toluene, gasoline, carbolic acid, amino compound, ethanolamine, etc. 11.4 Reading Window Cleaning The reading window needs to be cleaned regularly to avoid affecting the reading performance. Steps 1. Use a soft and non-abrasive cloth wet with water or a mild cleaner to gently wipe the window.

  • Page 94: Chapter 12 Faq (Frequently Asked Question)

    IDH9000 Wired Handheld Code Reader User Manual Chapter 12 FAQ (Frequently Asked Question) 12.1 Why there is no buzzer sound and the indicator is unlit after the device is connected? Reason The device’s drive is not installed successfully. Solution Install the device’s drive again.

  • Page 95: Why Configuring Setting Codes Failed Though There Is Buzzer Sound

    IDH9000 Wired Handheld Code Reader User Manual codes successfully? Reason The device’s device mode is test mode. Solution Set the device mode as normal mode. 12.5 Why configuring setting codes failed though there is buzzer sound? Reason The function of setting codes is not activated because Enable Setting Codes is not scanned and read.

  • Page 96: Why The Usb Type Device Cannot Be Listed When No Error Occurs In The Driver And The Gateway Can Discover The Device

    IDH9000 Wired Handheld Code Reader User Manual 12.8 Why the USB type device cannot be listed when no error occurs in the driver and the gateway can discover the device? Reason The device is found but the IP address is not obtained automatically.

  • Page 97: Why The Unreadable Codes Are Output After You Set Hid As The Usb Output Method

    IDH9000 Wired Handheld Code Reader User Manual switch to Composite HID Mode, and then the device can be listed. 3. Scan the setting mode of enabling. Figure 12-3 Setting Mode of Enabling 4. Scan the setting mode of composite HID mode.

  • Page 98: Chapter 13 Revision History

    IDH9000 Wired Handheld Code Reader User Manual Chapter 13 Revision History Table 13-1 Revision History Version No. Document No. Date Revision Details V1.0.0 UD39780B Sep. 30, 2024 Original version.

  • Page 99: Appendix A Ascii Table

    IDH9000 Wired Handheld Code Reader User Manual Appendix A ASCII Table Note Refer to section Set Setting Codes of Data Processing for digital codes and letter codes. Table A-1 ASCII Table Character Value Character Value Character Value Character Value （ Space ）...
  • Page 100 IDH9000 Wired Handheld Code Reader User Manual Character Value Character Value Character Value Character Value < >...
  • Page 101 UD39780B...

Table of Contents