Intended Use WARNING! The intended use of this Pride Mobility Products device is A Quantum Rehab Provider or a qualified technician to provide mobility assistance to persons limited to a seated must perform the initial setup of this product and must position who have the capacity to operate a motorized perform all of the instructions in this manual.
.....5 Activating Assistive Switch without Programmer ......Pairing Apple Device with Power Chair Please refer to the Q-Logic 3 or Q-Logic 3e Basic ......Setting up Switches on iPhone or Ipad Operation Instructions and the Consumer Safety Guide included with the power chair prior to making Start up Guide for Android/Windows....7...
SETUP NOTE: The end user must follow the proper sequences to activate their desired input device. Bluetooth® Startup Guide for Apple/IOS Bluetooth setup may require additional programming and setup by trained professional prior to use. There are new programming options that must be setup at delivery. WARNING! Read the product’s owner’s manual and all supplemental information in its entirety before operating the chair.
5. Return to HOME screen. to be chosen and set up through the programming station or handheld programmer as well A Quantum Rehab® Provider or a qualified technician must perform the initial setup of this power chair and perform all Step 1 ...
NOTE: The Scanning Style is default set to Auto Scanning. It may be easier to set to either Manual Scanning or Single Switch Step Scanning. NOTE: Gray icons indicate unpaired Q-Logic 3. Blue icons indicate paired Q-Logic 3. NOTE: To leave the mouse screen, press the on/off lever...
There are several options for mouse clicks available to best meet the needs of the individual. Quantum Rehab® Provider or a qualified technician must Step 2 perform the initial setup of this power chair and perform all ...
10. The power chair will then pair up with the computer or Android device. Step 3 NOTE: Gray icons indicate unpaired Q-Logic 3. Blue icons indicate paired Q-Logic 3. NOTE:To leave the mouse screen, press the on/off lever up, Key I, Home Button, or Key II.
SETUP Bluetooth Assistive Touch Steps as of iOS 15.4.1 How to Set Up from the Quantum Power Wheelchair 1. From the Home screen, give a left command to go into Settings. 2. Highlight Bluetooth Operation and give a right command.
QL3 EX hand control to perform specific commands in iOS/ iPadOS for your client. To do this, you will need to set the Key Buttons as MIO through the Quantum programming platform. 1. In ECON-W, navigate to Handcontrol, then Button Operation.
Page 11
SETUP 2. Change Key I and Key II respectively to Custom MIO from the drop-down menus. Click OK to enter Programming Mode. Step 2 3. Change Key I and Key II respectively to Custom MIO from the drop-down menus. Click OK to enter Programming Mode.
SETUP 4. Navigate to Mapped I/O menu in Econ-W. Step 4 5. Set Key I and Key II to Mouse Left Click and Mouse Right Click respectively. 6. Save the MIO configuration. 7. Exit Programming Mode in Econ-W. On the iPhone or iPad: 1.
Page 16
The Netherlands (Authorised EU Representative) 401 York Avenue De Zwaan 3 Duryea, PA 18642 www.quantumrehab.com 1601 MS Enkhuizen www.quantumrehab.eu www.quantumrehab.nl Canada 5096 South Service Road Italy Beamsville, Ontario L3J 1V4 Via del Progresso, ang. Via del Lavoro www.quantumrehab.ca Loc. Prato della Corte 00065 Fiano Romano (RM) Australia www.quantumrehab-italia.it...
Need help?
Do you have a question about the Q-LOGIC 3 and is the answer not in the manual?
Questions and answers