Subscribe to Our Youtube Channel
Related Manuals for DWT STSP05-65 DV
Summary of Contents for DWT STSP05-65 DV
- Page 1 STSP05-65 DV STSP06-80 DV en Original instructions ru Оригинальное руководство по эксплуатации ua Оригінальна інструкція з експлуатації kz Пайдалану нұсқаулығының түпнұсқасы...
-
Page 5: Noise Information
Jigsaw STSP05-65 DV STSP06-80 DV Power tool code [220-230 V ~50/60 Hz] Rated power Power output Amperage at voltage 220-230 V [A] Stroke rate at no-load [min 800-3000 800-3000 [mm] Length of stroke of the saw blade [inches] 3/4" 3/4"... - Page 6 Work area safety tached to a rotating part of the power tool may result in personal injury. Keep work area clean and well lit. Cluttered or Do not overreach. Keep proper footing and bal- dark areas invite accidents. ance at all times. This enables better control of the Do not operate power tools in explosive atmos- power tool in unexpected situations.
-
Page 7: Special Safety Warnings
Note that when you operate a power tool, please ask the local construction organization for assistance hold the auxiliary handle correctly, which is helpful if necessary. In the work, if the cable is cut off, it would when controlling the power tool. Therefore, proper pipe would explode. - Page 8 Symbol Meaning Symbol Meaning Read all safety regulations During operation, remove and instructions. the accumulated dust. Pendulum motion off. Wear safety goggles. stage. Wear ear protectors. Pendulum motion, second stage. Wear a dust mask. Pendulum motion, third stage. Disconnect the power tool from the mains before instal- lation or adjustment.
- Page 9 Long-term switching on / off Installation and regulation of power tool Switching on: elements Push on / off switch and lock it in the position with lock-on button Before carrying out any works on the power tool it Switching off: must be disconnected from the mains.
- Page 10 Make sure that the blank part is tightly fastened and Step 0: that all of the metal pieces (nails, screw nails, etc.) No pendulum action; have been removed from it. Turn the power tool on before the saw blade comes in contact with the blank part. Do not use extra force;...
-
Page 11: Environmental Protection
Information about service centers, parts diagrams and information about spare parts can also be found under: www.dwt-pt.com Transportation of the power tools Categorically not to drop any mechanical impact on the packaging during transport. - Page 12 STSP05-65 DV STSP06-80 DV 800-3000 800-3000 3/4" 3/4" 45°/45° 45°/45° 2-9/16" 3-1/8" 3/8" 3/8" 1/4" 1/4" 2.06 2.06 4.54 4.54 (A)] (A)] Wu Cunzhen Merit Link International AG 2006/42/EC 2014/30/EU EN 62841-1:2015+A11; EN 62841-2-11: 2016+A1 EN IEC 55014-1:2021; EN IEC 55014-2:2021;...
- Page 19 www.dwt-pt.com...
- Page 20 STSP05-65 DV STSP06-80 DV 800-3000 800-3000 3/4" 3/4" 45°/45° 45°/45° 2-9/16" 3-1/8" 3/8" 3/8" 1/4" 1/4" 2.06 2.06 4.54 4.54 (A)] (A)] Merit Link International AG 2006/42/EC 2014/30/EU EN 62841-1:2015+A11; EN 62841-2-11: 2016+A1 EN IEC 55014-1:2021; EN IEC 55014-2:2021; EN IEC 61000-3-2:2019+A1:2021;...
- Page 26 www.dwt-pt.com...
- Page 27 STSP05-65 DV STSP06-80 DV 800-3000 800-3000 3/4" 3/4" 45°/45° 45°/45° 2-9/16" 3-1/8" 3/8" 3/8" 1/4" 1/4" 2.06 2.06 4.54 4.54 Merit Link International AG Stabio, 2006/42/EC 2014/30/EU EN 62841-1:2015+A11; EN 62841-2-11: 2016+A1 EN IEC 55014-1:2021; EN IEC 55014-2:2021; EN IEC 61000-3-2:2019+A1:2021;...
- Page 33 www.dwt-pt.com...
- Page 35 STSP05-65 DV STSP06-80 DV [220 230 ~50/60 220 230 800-3000 800-3000 3/4" 3/4" 45°/45° 45°/45° 2-9/16" 3-1/8" 3/8" 3/8" 1/4" 1/4" 2.06 2.06 4.54 4.54 Wu Cunzhen 220 230 Merit Link International AG Stabio 2006/42/EC 2014/30/EU EN 62841-1:2015+A11; EN 62841-2-11: 2016+A1 EN IEC 55014-1:2021;...
- Page 36 ELCB GFCI...
- Page 38 XXXXXXX...
- Page 42 www.dwt-pt.com...
- Page 43 Merit Link International AG P.O. Box 641, CH-6855 Stabio Switzerland www.meritlink.com...
Need help?
Do you have a question about the STSP05-65 DV and is the answer not in the manual?
Questions and answers