Access Control - D-Link DIR-600 - Wireless N 150 Home Router User Manual

Section 3 - Configuration
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses
from accessing the Internet via Network. You can either manually add a MAC address or select the MAC address from
the list of clients that are currently connected to the Broadband Router.
Configure MAC
Select Turn MAC Filtering OFF, Turn MAC Filtering
Filter:
ON and ALLOW computers listed to access the
network, or Turn MAC Filtering ON and DENY
computers listed to access the network.
MAC Address:
Enter the MAC address you would like to filter.
To find the MAC address on a computer, please
refer to the Networking Basics section in this
manual.
DHCP Client
Select a DHCP client from the drop-down menu and
List:
click the arrow to copy that MAC Address.
Schedule:
The schedule of time when the network filter will
be enabled. The schedule may be set to Always,
which will allow the particular service to always
be enabled. You can create your own times in the
Maintenance > Schedules section.
D-Link DIR-600 User Manual
MAC Filter
38