Firewall & Dmz - D-Link DIR-600 - Wireless N 150 Home Router User Manual

Section 3 - Configuration
This section will allow you to set up a DMZ host and to set up firewall rules.
If you have a client PC that cannot run Internet applications properly from behind the DIR-600, then you can set the
client up for unrestricted Internet access. It allows a computer to be exposed to the Internet. This feature is useful for
gaming purposes. Enter the IP address of the internal computer that will be the DMZ host. Adding a client to the DMZ
(Demilitarized Zone) may expose your local network to a variety of security risks, so only use this option as a last
resort.
Enable SPI: Check this to enable SPI.
Enable DMZ Check this box to enable DMZ.
Host:
DMZ IP Enter the IP address of the computer you would
Address: like to open all ports to.
Name: Choose a name for the firewall rule.
Action: Select to Allow or Deny transport of the data packets
according to the criteria defined in the rule.
Source/Dest: The Source/Destination is the TCP/UDP port on
either the LAN or WAN side.
Click New Schedule to access the Schedules
Schedule:
window. See Maintenance>Schedules for more
information.
IP Address:
Enter a beginning and ending IP address.
Protocol:
Select the transport protocol that will be used for
the filter rule.
Port Range:
Enter the desired port range for the filter rule.
D-Link DIR-600 User Manual
Firewall & DMZ
39