D-Link DIR-600 - Wireless N 150 Home Router User Manual page 27

Section 3 - Configuration
Wi-Fi
To implement Wi-Fi protection, or WCN 2.0, tick the Enable
Protected
checkbox, click either Generate New PIN or Reset PIN to
Setup: Default, and then configure the Wi-Fi settings below. Please
see the Setting Up Wi-Fi Protection (WCN 2.0 in Windows
Vista) section later in this manual for detailed configuration
information.
Enable Check the box to enable the wireless function. If you do
Wireless: not want to use wireless, uncheck the box to disable all the
wireless functions.
Wireless
Service Set Identifier (SSID) is the name of your wireless
Network Name:
network. Create a name using up to 32 characters. The
SSID is case-sensitive.
Enable Indicates the channel setting for the DIR-600. By default
Wireless
the channel is set to 6. The Channel can be changed to
Channel: fit the channel setting for an existing wireless network or
to customize the wireless network. The Auto Channel
Selection setting can be selected to allow the DIR-600 to
choose the channel with the least amount of interference.
Use the drop-down menu to select the appropriate Transmission Rate in Mbits per second. Many users will want to use the
Transmission
default setting, Best (automatic).
Rate:
Enable Wi-Fi Multimedia to enjoy basic quality of service features. WMM prioritizes traffic according to four access categories:
WMM Enable:
voice, video, best effort, and background.
Check this option if you would not like the SSID of your wireless network to be broadcasted by the DIR-600. If this option is
Enable Hidden
checked, the SSID of the DIR-600 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID
Wireless:
of your DIR-600 in order to connect to it.
D-Link DIR-600 User Manual 27