Lifetime 60475 Assembly Instructions Manual

Outdoor storage shed

Advertisement

Quick Links

OUTDOOR STORAGE
SHED
MODEL 60475
BEFORE ASSEMBLY:
• Assemble on a level surface.
• At least 3 people recommended for setup.
THIS ITEM IS INTENDED FOR OUTDOOR DOMESTIC USE ONLY. NOT FOR
COMMERCIAL USE.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
TOOLS REQUIRED
(Not included-unless otherwise indicated*)
QUESTIONS?
Call:
1-800-225-3865
(English, French, Spanish)
CONTACT LIFETIME CUSTOMER SERVICE:
Live Chat:
www.lifetime.com/customerservice/home
(click on "LIVE CHAT" tab)
Pour le français, voir la page 2. Para el español, ver la página 3.
5/16" (≈8 mm) Wood Drill Bit
5/16" (≈8 mm) Masonry Drill Bit
ARA*
ADC*
For Customer Service in mainland
Europe and the United Kingdom, E-mail:
csinternational@lifetime.com
ASSEMBLY INSTRUCTIONS

TABLE OF CONTENTS

Icon legend..................................................4
Warnings & notices.......................................5
Parts identifi er.............................................6
Platform construction.................................10
Truss assembly...........................................15
Gable assembly...........................................19
Door assembly............................................22
Floor assembly............................................33
Wall assembly.............................................38
Window installation....................................48
Door & gable installation.............................51
Roof assembly............................................57
Door alignment...........................................82
Shed anchoring...........................................85
Latch installation........................................88
Shelving installation....................................97
Cleaning & care...........................................99
Registration.......................................100
Warranty..........................................104
Model Number: 60475
Product ID:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 60475 and is the answer not in the manual?

Questions and answers

Summary of Contents for Lifetime 60475

  • Page 1: Table Of Contents

    5/16" (≈8 mm) Masonry Drill Bit Latch installation........88 Shelving installation........97 Cleaning & care...........99 ARA* Registration........100 ADC* Warranty..........104 Model Number: 60475 QUESTIONS? CONTACT LIFETIME CUSTOMER SERVICE: Product ID: Live Chat: Call: For Customer Service in mainland www.lifetime.com/customerservice/home Europe and the United Kingdom, E-mail: 1-800-225-3865 csinternational@lifetime.com...
  • Page 2: Instructions D'assemblage

    ARA* ADC* Enregistrement........100 Garantie..........105 N° de pièce : 60475 ® QUESTIONS ? CONTACTER AUX SERVICES À LA CLIENTÈLE LIFETIME Référence du produit : Composer le Entretien en direct: Pour les services à la clientèle du www.lifetime.com/customerservice/home 1-800-225-3865 continent européen, É-mail: (cliquer sur la languette «...
  • Page 3: Instrucciones De Ensamblaje

    Limpieza y cuidado..........99 ADC* Registro..........100 Garantía..........106 Número de pieza: 60475 ® ¿PREGUNTAS? PONERSE EN CONTACTO CON LOS SERVICIOS DE CLIENTES LIFETIME ID del producto: Llamar : Chat en vivo: Para el servicio a clientes en el continente europeo, correo electrónico: 1-800-225-3865 www.lifetime.com/customerservice/home...
  • Page 4: Icon Legend

    ICON LEGEND / LÉGENDE DES ICÔNES / LEYENDA DE ÍCONOS • Indicates special heed should be taken when reading. • Indique qu’une attention spéciale doit être portée à la lecture. • Indica que uno debe prestar atención al leer. • Indicates the parts (or no parts) required for a section. •...
  • Page 5: Warnings & Notices

    WARNINGS & NOTICES / AVERTISSEMENTS ET AVIS / ADVERTENCIAS Y AVISOS English: • Failure to follow these warnings may result in serious injury or property damage and will void warranty. • To ensure safety, do not attempt to assemble this product without following the instructions carefully. •...
  • Page 6: Parts Identifi Er

    PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 1 / CONTENU DE LA BOÎTE 1 / CONTENIDO DE LA CAJA 1 AHE (x2) AHD (x10) AHH (x2) BLISTER PACKS / BLISTERS / BLÍSTERES CONTENTS OF SMALL PARTS BOX / CONTENU DE LA BOÎTE DE PETITES PIÈCES / CONTENIDO DE LA CAJA DE PIEZAS PEQUEÑAS BYS (x2) ETD (x5) AFZ (x2)
  • Page 7 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS OF BOX 2 / CONTENU DE LA BOÎTE 2 / CONTENIDO DE LA CAJA 2 AGR (x2) AGQ (x12) AGL (x4) CONTENTS OF BOX 3 / CONTENU DE LA BOÎTE 3 / CONTENIDO DE LA CAJA 3 AFX (x4) AGF (x1) AGO (x1)
  • Page 8 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS METAL KIT 1 / CONTENU DU KIT DE PIÈCES EN MÉTAL 1 / CONTENIDO DEL KIT DE PIEZAS DE METAL 1 67 3/4 in/po (172 cm) AFM (x10) 78 3/8” 78 3/8 in/po (199 cm) BXX (x1) 54 3/8”...
  • Page 9 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS CONTENTS METAL KIT 2 / CONTENU DU KIT DE PIÈCES EN MÉTAL 2 / CONTENIDO DEL KIT DE PIEZAS DE METAL 2 43 1/4” (≈109,8 cm) 43 1/4 in/po (109,8 cm) AFH (x10) 40 in/po (102 cm) AFG (x5)
  • Page 10: Platform Construction

    PLATFORM CONSTRUCTION / CONSTRUCTION DE LA PLATE-FORME / CONSTRUCCIÓN DE LA PLATAFORMA • You must provide a platform on which to assemble your shed. Proper building permit documentation may be required in your neighborhood. Consult all local building codes prior to assembling the shed. Before beginning assembly, you must pour or construct a platform.
  • Page 11 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) CONCRETE REQUIRED / BÉTON REQUIS / CONCRETO REQUERIDO 2 yd (≈1,53 m CONCRETE PLATFORM / PLATE-FORME EN BÉTON / PLATAFORMA DE CONCRETO • The concrete should be approximately 4" (≈10 cm) thick. The actual dimensions of the shed, at its widest and longest points, are 84"...
  • Page 12 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) WOOD REQUIRED / BOIS REQUIS / MADERA REQUERIDA WOOD PLATFORM / PLATE-FORME EN BOIS / PLATAFORMA DE MADERA • All lumber must be rated for outdoor use! The actual dimensions of the shed, at its widest and longest points, are 84” x 174” (≈213 cm x ≈442 cm).
  • Page 13 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS, PARTS, AND HARDWARE REQUIRED / OUTILS, PIÈCES, ET QUINCAILLERIE REQUIS / INSTRUMENTAL, PIEZAS, Y HERRAJE REQUERIDOS 2 in/po x 4 in/po x 78 1/2 in/po (≈5 cm x ≈10 cm x ≈199 cm) (x10) 2 in/po x 4 in/po x 168 in/po (≈5 cm x ≈10 cm x ≈426,7 cm) (x2) 16d 3 1/2 in/po (16 mm x ≈8,89 cm) (x48) 1.2.1...
  • Page 14 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) / SECCIÓN 1 (CONTINUACIÓN) TOOLS, PARTS, AND HARDWARE REQUIRED / OUTILS, PIÈCES, ET QUINCAILLERIE REQUIS / INSTRUMENTAL, PIEZAS, Y HERRAJE REQUERIDOS 24 in/po x 81 1/2 in/po x 3/4 in/po (≈60,9 cm x ≈207 cm x ≈19 mm) (x1) 48 in/po x 81 1/2 in/po x 3/4 in/po (≈122 cm x ≈207 cm x ≈19 mm) (x3) 8d 2 1/2 in/po (8 mm ≈6,35 cm) (x36)
  • Page 15: Truss Assembly

    TRUSS ASSEMBLY / ASSEMBLAGE DES FERMES / ENSAMBLAJE DE LAS CERCHAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO ADJ (x10) CXK (x30) ETC (x30) 8 1/4” 8 1/4 in/po (20,96 cm) ADH (x5) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal parts / Pièces en métal / Piezas de metal 43 1/4”...
  • Page 16 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) ETC (x4) CXK (x4) • Align the holes in a connector (ETD) with those in the ends of the truss channels (AFH). •...
  • Page 17 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (≈10 mm) CXK (x2) ETC (x2) • Align the holes in a truss brace (AFG) with those in the truss gutter channels. Attach the truss brace to the truss gutter channels using the hardware included.
  • Page 18 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) / SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po ETC (x24) (≈10 mm) CXK (x24) 7/16 in/po (≈11 mm) (x2) 8 1/4” 8 1/4 in/po (20,96 cm) ADH (x5) ADJ (x10)
  • Page 19: Gable Assembly

    GABLE ASSEMBLY / ASSEMBLAGE DES PIGNONS / ENSAMBLAJE DE LAS FACHADAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO ADV (x6) ADZ (x3) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal parts / Pièces en métal / Piezas de metal 54 3/8”...
  • Page 20 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x6) • Align the holes in the lintel (AFE) with those in the entry gable (AGF). •...
  • Page 21 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) / SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x3) • Align the holes in the left (AGI) and right (AGH) rear gable halves. •...
  • Page 22: Door Assembly

    LEFT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE GAUCHE / ENSAMBLAJE DE LA PUERTA IZQUIERDA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO ADW (x1) CHK (x5) BYZ (x2) ARA (x1) AEE (x3) BBH (x1) DGR (x1) DGS (x1) (Bottom / Inférieur / Inferior) (Top / Supérieur / Superior) ADC (x1) PARTS REQUIRED / PIEZAS REQUERIDAS / PIÈCES REQUISES...
  • Page 23 LEFT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE GAUCHE / ENSAMBLAJE DE LA PUERTA IZQUIERDA PARTS REQUIRED / PIEZAS REQUERIDAS / PIÈCES REQUISES Plastic parts / Pièces en plastique / Piezas de plástico BYS (x1) BYR (x1) AGO (x1) TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO (Not included—unless otherwise indicated*) / (Non inclus —...
  • Page 24 (AGO). escanear el código QR debajo para ver un video del ensamblaje. http://go.lifetime.com/7x7shed-section4 • Insert a square tube (CHI) into the square hole in the bottom of the door until the end hangs out about 1/2" (≈12 mm).
  • Page 25 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADC (x1)* CHK (x1) BBH (x1) • Insert an end cap (BBH) into the end of the square tube (CHI). Gently, fi nish inserting the tube until it’s fl ush with the bottom of the door.
  • Page 26 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ARA (x1) • Drill two holes at the top and bottom of the door at the locations indicated. •...
  • Page 27 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS CHK (x4) ADC (x1)* DGS (x1) (Top / Supérieur / Superior) DGR (x1) (Bottom / Inférieur / Inferior) •...
  • Page 28 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) / SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADW (x1) BYZ (x2) AEE (x3) • Attach the handle pieces (BYR & BYS) using the hardware provided. •...
  • Page 29 RIGHT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE DROITE / ENSAMBLAJE DE LA PUERTA DERECHA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO ADW (x1) CHK (x1) BYZ (x2) BBH (x1) BBI (x1) AEE (x1) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal parts / Pièces en métal / Piezas de metal 77 in/po (≈1,96 m) CHH (x1)
  • Page 30 QR debajo para ver un video del ensamblaje. http://go.lifetime.com/7x7shed-section5 • Insert a square tube (CHI) into the square hole in the bottom of the door until the end hangs out about 1/2" (≈12 mm). • Insérer un tube carré (CHI) dans le trou carré au fond de la port jusqu’à ce que l’extrémité dépasse à peu près 1/2"...
  • Page 31 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ARA (x1) BBH (x1) • Insert an end cap (BBH) into the end of the square tube (CHI). Gently, fi nish inserting the tube until it’s fl ush with the bottom of the door.
  • Page 32 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) / SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS CHK (x1) ADW (x1) BYZ (x2) AEE (x1) ADC (x1)* BBI (x1) • Once the end cap is fl ush with the bottom of the door, insert self-drilling/self-tapping screw (CHK) into the door panel at the location shown.
  • Page 33: Floor Assembly

    FLOOR ASSEMBLY / ASSEMBLAGE DU PLANCHER / ENSAMBLE DEL PISO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO BQC (x20) AHO (x2) • These screws do not anchor the fl oor; they only hold the panels together. • Ces vis n’ancrent pas le plancher ; ils ne servent qu’attacher les panneaux les uns aux autres. •...
  • Page 34 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • Hold an inner fl oor panel (AFX) at an angle and slide the tabs along the edge underneath the other outer fl oor panel (AGR). The tabs interlock.
  • Page 35 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • Attach the third inner fl oor panel (AFX) to the inner fl oor panel. •...
  • Page 36 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS AHO (x2) • Attach the last outer fl oor panel (AGR) to the inner fl oor panel. •...
  • Page 37 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) / SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS BQC (x20) • Insert the screws (BQC) through the divots in the fl oor panels and into the tabs of the adjacent fl oor panels. (The divots are near the seams of the fl...
  • Page 38: Wall Assembly

    WALL ASSEMBLY / ASSEMBLAGE DES MURS / ENSAMBLAJE DE LOS MUROS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO ADZ (x133) ADV (x6) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal parts / Pièces en métal / Piezas de metal 43”...
  • Page 39 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x50) • Attach a wall support channel (AFM) to a wall panel (AHD) using fi ve (5) screws (ADZ). Repeat this step for all wall panels. •...
  • Page 40 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) • Attach a wall support channel (BXT) to each window wall panel (AHH) using four (4) screws (ADZ). Repeat this step for the second window wall panel.
  • Page 41 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • Insert the two left-most tabs at the bottom of the corner panel (AGL) into the two right-most slots along the front edge of the fl...
  • Page 42 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • Bend the corner panel. Pull down on the panel to insert the remaining tabs. To help with insertion, place the plastic block (EUF) under the fl...
  • Page 43 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x25) • One at a time, insert the tabs of fi ve (5) wall panels (AHD & AHH) into the slots along the right edge of the fl oor. Slide the panels toward the corner panel.
  • Page 44 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x15) • Attach this corner panel in the same manner you did the previous corner panel. •...
  • Page 45 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x30) • Secure this corner panel in the same manner you did the previous corner panel. •...
  • Page 46 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x5) 7.11 • Secure this corner panel in the same manner you did the previous corner panel. •...
  • Page 47 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) / SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x6) 7.12 • Use a hand screwdriver to attach the wall support tube (AFE) to the top of the rear wall panels using six (6) screws (ADV). •...
  • Page 48: Window Installation

    WINDOW INSTALLATION / INSTALLATION DU CARREAU / INSTALACIÓN DE LA HOJA DE VENTANA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO ADZ (x4) AIS (x2) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic parts / Pièces en plastique / Piezas de plástico AHE (x2) TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO (Not included—unless otherwise indicated*) / (Non inclus —...
  • Page 49 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS • Peel off the protective backing from both sides of the window pane (AHE). • Retirer la pellicule protectrice des deux côtés du carreau (AHE). •...
  • Page 50 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) / SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) AIS (x2) • Attach the latch (AIS) at the top left corner of the window. The latch should move freely. •...
  • Page 51: Door & Gable Installation

    DOOR & ENTRY GABLE INSTALLATION / INSTALLATION DES PORTES ET DU PIGNON D’ENTRÉE / INSTALACIÓN DE LAS PUERTAS Y LA FACHADA DE ENTRADA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO BFY (x5) ADX (x2) AHP (x2) ADJ (x5) ADZ (x11) BXZ (x16) BYM (x1) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS...
  • Page 52 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) BXZ (x6) • Place the right door jamb (BYB), the wider of the two jambs, onto the edge of the right, front corner wall panel. The curved end curves toward the inside of the shed.
  • Page 53 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (≈11 mm) BFY (x5) BXZ (x10) ADJ (x5) • Place the left door jamb (BYA) onto the edge of the left, front corner wall panel. The curved edge curves toward the outside of the shed.
  • Page 54 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS AHP (x2) • Pull the hinge tube down out of the door about six inches. Align the hole at the bottom of the hinge tube with the slit in the bushing, and insert the tube.
  • Page 55 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x5) • Slide the holes in the entry gable down over the two hinge tubes. •...
  • Page 56 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) / SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS BYM (x1) ADX (x2) • Attach the strike plate (BYM) to the fl oor as shown. •...
  • Page 57: Roof Assembly

    ROOF ASSEMBLY / ASSEMBLAGE DU TOIT / ENSAMBLAJE DEL TEJADO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO GJZ (x16) ADV (x48) ADZ (x152) FEX (x16) HLO (x16) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal parts / Pièces en métal / Piezas de metal 26 11/16”...
  • Page 58 ROOF ASSEMBLY / ASSEMBLAGE DU TOIT / ENSAMBLAJE DEL TEJADO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic parts / Pièces en plastique / Piezas de plástico (x1) FYV (x6) AGQ (x12) BYW (x2) FRW (x5) BYX (x4) TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO (Not included—unless indicated otherwise*) / (Non inclus —...
  • Page 59 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 10.1 • Insert a support tube (BYY) into the notches of a roof support panel (AGQ). Repeat this step for all roof panels. •...
  • Page 60 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS GJZ (x4) FEX (x4) HLO (x4) 10.2 • Press four (4) screw anchors (FEX) into place on a roof panel, as shown. Place the screw anchors on the side where the 3-letter ID is found.
  • Page 61 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x12) 10.4 • Attach a side gable to the shed using twelve (12) screws (ADZ). •...
  • Page 62 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 10.6 • Set a truss assembly into the notches on the fi rst two opposite wall panels. •...
  • Page 63 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x4) 10.8 • Align the four holes in the wall panel with the slits at the bottom of the roof panel, and insert four (4) screws (ADV) to secure the panel in place.
  • Page 64 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) 10.9 • Align the L-brackets with the holes on the gable and insert four (4) screws (ADZ) to secure the gable to the roof panel. •...
  • Page 65 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS GJZ (x4) FEX (x4) HLO (x4) 10.11 • Add the screw anchors (FEX), the L-bracket (HLO) and the screws (GJZ) to the side of a second roof panel. This hardware will be placed opposite of where the 3-letter ID is located.
  • Page 66 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) ADV (x4) 10.12 • Place the second roof panel. • Placez le deuxième panneau de toit. •...
  • Page 67 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x8) ADZ (x16) 10.14 • Set a truss assembly into the notches on the second two opposite wall panels. •...
  • Page 68 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x16) ADZ (x32) 10.16 • Repeat steps 10.13–10.15 for the next two trusses and the next four roof panels. •...
  • Page 69 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x8) ADZ (x16) 10.17 • Repeat steps 10.13–10.15 for the last truss and the next two roof panels. •...
  • Page 70 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS GJZ (x4) FEX (x4) HLO (x4) 10.18 • Add the screw anchors (FEX), the L-bracket (HLO) and the screws (GJZ) to the side of the fourth roof panel. Place the hardware on the side where the 3-letter ID is found.
  • Page 71 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) ADV (x4) 10.19 • Set the eleventh roof panel (AGQ) down onto the wall panel, gable, and truss. Align the L-brackets with the holes on the gable.
  • Page 72 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS GJZ (x4) FEX (x4) HLO (x4) 10.21 • Add the screw anchors (FEX), the L-bracket (HLO) and the screws (GJZ) to the side of the last roof panel. This hardware will be placed opposite of where the 3-letter ID is located.
  • Page 73 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x4) ADZ (x8) 10.22 • Set the last roof panel (AGQ) down onto the wall panel, gable, and truss. Align the L-brackets with the holes on the gable.
  • Page 74 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x2) 10.24 • Insert two (2) pieces of foam (BYX) into each end cap (BYW) as shown. There are two end caps. •...
  • Page 75 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x2) 10.26 • Connect the end roof cap to the inside of the shed using two (2) screws (ADZ). These screws attach to the underside of the roof cap.
  • Page 76 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 10.27 • Bend the skylights (FYV) slighty before installing them. The fi rst skylight will fi t in the upper edge of the end cap (BYW).
  • Page 77 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x2) 10.28 • Place the skylight onto the end of the roof. The fi rst skylight will fi t in the upper edge of the end cap (BYW). The end of the connector will extend to the truss.
  • Page 78 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 10.30 • Place a connector on the end of the second skylight. • Mettre un connecteur sur l’extrémité du deuxième puits de lumière. •...
  • Page 79 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 10.32 • Repeat the last step for the next four (4) skylights and connectors. Do not use any other hardware until all the skylights are in place. •...
  • Page 80 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) 10.34 • Connect the end roof cap to the inside of the shed using two (2) screws (ADZ). These screws attach to the underside of the roof cap.
  • Page 81 SECTION 10 (CONTINUED) / SECTION 10 (SUITE) / SECCIÓN 10 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x34) 10.36 • Attach the skylights to the roof panels with the hardware indicated. •...
  • Page 82: Door Alignment

    DOOR ALIGNMENT / ALIGNEMENT DES PORTES / ALINEACIÓN DE LAS PUERTAS HARDWARE REQUIRED / HERRAJE REQUERIDO / QUINCAILLERIE REQUISE PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic parts / Pièces en plastique / Piezas de plástico EUG (x4) TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO (Not included—unless otherwise indicated*) / (Non inclus —...
  • Page 83 • En cas de problèmes avec cette section, suivre le code en bas pour voir un vidéo comment faire pour cette section. • En caso de problemas con esta sección, seguir el código debajo para ver un video «cómo» para esta sección. http://go.lifetime.com/dooralignment7 11.1 •...
  • Page 84 SECTION 11 (CONTINUED) / SECTION 11 (SUITE) / SECCIÓN 11 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 11.2 • If the left door is higher, insert a shim underneath the fl oor and right hinge tube until the two doors are level. •...
  • Page 85: Shed Anchoring

    SHED ANCHORING / ANCRAGE DE L’ABRI / ANCLAJE DE LA CASETA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO Not included—unless otherwise indicated* / Non inclus — sauf indication contraire* / No incluido, salvo indicación contratia* 5/16"...
  • Page 86 SECTION 12 (CONTINUED) / SECTION 12 (SUITE) / SECCIÓN 12 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 5/16 in/po (≈8 mm) 12.1 • To anchor your shed, you must purchase the correct anchoring hardware. For a concrete platform, we recommend using a hammer drill, 5/16"...
  • Page 87 SECTION 12 (CONTINUED) / SECTION 12 (SUITE) / SECCIÓN 12 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 5/16 in/po (≈8 mm) 12.1 • To anchor your shed, you must purchase the correct anchoring hardware. For a wood-framed platform, we recommend using a drill, 5/16"...
  • Page 88: Latch Installation

    LATCH INSTALLATION / INSTALLATION DU LOQUET / INSTALACIÓN DEL PESTILLO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO CVR (x1) CVQ (x1) ACA (x3) CHK (x2) ADX (x9) CVS (x1) AAB (x3) AEE (x9) AEB (x3) CVW (x1) CVU (x1) CVT (x1) CVV (x1) TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO...
  • Page 89 SECTION 13 (CONTINUED) / SECTION 13 (SUITE) / SECCIÓN 13 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS AEB (x1) ACA (x1) AAB (x1) CVT (x1) 13.1 • Only after following the anchoring instructions, attach the left latch bracket (CVT) to the left door using the hardware provided.
  • Page 90 SECTION 13 (CONTINUED) / SECTION 13 (SUITE) / SECCIÓN 13 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (≈11 mm) CVW (x1) AEB (x2) ACA (x2) CVU (x1) AAB (x2) CVV (x1) 13.2 •...
  • Page 91 SECTION 13 (CONTINUED) / SECTION 13 (SUITE) / SECCIÓN 13 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS CVQ (x1) 13.4 • Slide the large right cover plate (CVQ) up under the latch assembly, and rotate the latch downward to its locked position as shown.
  • Page 92 SECTION 13 (CONTINUED) / SECTION 13 (SUITE) / SECCIÓN 13 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADX (x3) AEE (x3) 13.5 • Secure the large cover plate to the door as shown using the hardware provided. •...
  • Page 93 SECTION 13 (CONTINUED) / SECTION 13 (SUITE) / SECCIÓN 13 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADX (x3) AEE (x3) CVR (x1) 13.6 • Slide the small right cover plate (CVR) down under the latch assembly, and secure the cover plate to the door as shown using the hardware provided.
  • Page 94 SECTION 13 (CONTINUED) / SECTION 13 (SUITE) / SECCIÓN 13 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS CHK (x1) 13.7 • Close both doors and lock the latch. Adjust the left latch bracket so the latch slides through freely. •...
  • Page 95 SECTION 13 (CONTINUED) / SECTION 13 (SUITE) / SECCIÓN 13 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (≈11 mm) CVS (x1) 13.9 • Tighten the nut to the left latch bracket. •...
  • Page 96 SECTION 13 (CONTINUED) / SECTION 13 (SUITE) / SECCIÓN 13 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADX (x3) AEE (x3) CHK (x1) 13.11 • Secure the left cover plate to the door as shown using the hardware provided. •...
  • Page 97: Shelving Installation

    SHELVING INSTALLATION / INSTALLATION DU RAYONNAGE / INSTALACIÓN DE LA ESTANTERÍA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO ADZ (x12) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal parts / Pièces en métal / Piezas de metal FEG (x2) Plastic parts / Pièces en plastique / Piezas de plástico CONTENTS OF BOX 2 / CONTENU DE LA BOÎTE 2 / CONTENIDO DE LA CAJA 2 AFS (x1)
  • Page 98 SECTION 14 (CONTINUED) / SECTION 14 (SUITE) / SECCIÓN 14 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS / INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x12) 14.1 • Insert two (2) shelf brackets (FEG) into the slots in two adjacent wall/shelf support channels. The shelf brackets must be at the same height.
  • Page 99: Cleaning & Care

    ® product purchase. By following the instructions below, your new Lifetime product should provide you with years of service and enjoyment. The polyethylene panels are stain and solvent resistant. Most stains can be removed using a mild soap and a soft-bristled brush.
  • Page 100: Registration

    à des tiers, et ne leur permettra pas d’utiliser vos données personnelles à leurs propres fi ns. Nous vous invitons à lire notre politique de confi dentialité à www.lifetime.com (en anglais seulement) ENREGISTRER CE PRODUIT aujourd’hui! REGISTRAR EL PRODUCTO EN LÍNEA EN WWW.LIFETIME.COM...
  • Page 101 NOTES / REMARQUES / NOTAS...
  • Page 102 NOTES / REMARQUES / NOTAS...
  • Page 103 NOTES / REMARQUES / NOTAS...
  • Page 104: Warranty

    This warranty is nontransferable and is expressly limited to the repair or replacement of defective products. If the product is defective within the terms of this warranty, Lifetime Products, Inc. will repair or replace defective parts at no cost to the purchaser.
  • Page 105 La présente garantie remplace expressément toute autre garantie, expresse ou implicite, y compris les garanties de qualité marchande ou d’adaptation à un usage particulier dans la mesure permise par les lois du pays ou de l’État. Ni Lifetime Products, Inc. ni aucun de ses représentants n’assument une quelconque responsabilité en lien avec ce produit. Cette garantie vous donne des droits juridiques précis et vous pourriez également avoir d’autres droits selon l’État ou la province.
  • Page 106: Garantía

    NO ESTÁN DISPONIBLES O SON OBSOLETAS. El comprador original recibe una garantía de que los productos de césped y jardín de Lifetime están libres de defectos de material o mano de obra durante un período de 10 años a partir de la fecha de compra original al por menor.
  • Page 107 IMPORT INFORMATION / IMPORTATIONS / INFORMACIÓN DE IMPORTACIONES Importado por: Distributed by: Costco Wholesale Corporation Importadora Primex S.A. de C.V. Blvd. Magnocentro No. 4 P.O. Box 34535 Seattle, WA 98124-1535 San Fernando La Herradura Huixquilucan, Estado de México C.P. 52765 1-800-774-2678 www.costco.com RFC: IPR-930907-S70...
  • Page 108 Pour acheter des accessoires ou des autres produits Lifetime , visiter le : www.lifetime.com Ou composer le 1-800-424-3865 ® MEJORAR LA COMPRA DE LIFETIME AGREGANDO ACCESORIOS U OTROS MARAVILLOSOS PRODUCTOS Para comprar accesorios u otros productos de Lifetime®, visitarnos en: www.lifetime.com O marcar al 1-800-424-3865 1238165 9/26/2024...

Table of Contents