Download Print this page

Advertisement

Quick Links

Spread Width (ft): 90
Main Boom Pipe Size (in): 3-1/4
Bin 1 Floor Chains (in.): 16
Bin 2 Floor Chains (in.): 16
Total Capacity : 320 cu ft / 19,200lbs @ 60
Front Main Hopper Capacity: 165 cu ft / 9,900 lbs. @ 60 lbs./cu ft.
*Mid Small Hopper Capacity: 30 cu ft / 1,800 lbs. @ 60 lbs./cu ft.
Rear Main Hopper Capacity: 90 cu ft / 5,400 lbs. @ 60 lbs./cu ft.
**Micro Metering Hopper Capacity: 35 cu ft / 1,575 lbs. @ 45 lbs./cu ft.
*Mid hopper volume is joined with front or rear hopper volume as per mid flip gate.
**Micro hopper volume can be joined with rear hopper or metered separately via
micro roller as per rear flip gate.
See 'Multi Bin Hopper Configuration" in this guide for more detail.
Osceola, Iowa
Cornelia, Georgia
NOTE: Use this as a quick start guide. For further details and procedures, refer to the Operator's Manual provided with the machine.
Salford, Ontario
Elie, Manitoba
AB320
1-866-442-1293
www.salfordgroup.com
Salford Group Inc.
364018 McBeth Rd.
Salford, Ontario, N0J 1W0
Phone: 519-485-1293
10103687

Advertisement

loading
Need help?

Need help?

Do you have a question about the VALMAR 6700 AB320 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Salford VALMAR 6700 AB320

  • Page 1 AB320 Salford Group Inc. 364018 McBeth Rd. Salford, Ontario, N0J 1W0 Phone: 519-485-1293 • Spread Width (ft): 90 • Main Boom Pipe Size (in): 3-1/4 • Bin 1 Floor Chains (in.): 16 • Bin 2 Floor Chains (in.): 16 •...
  • Page 2 AB320 Salford Group Inc. 364018 McBeth Rd. Salford, Ontario, N0J 1W0 Phone: 519-485-1293 ETERING ECTION ONTROL ETERING ECTION ONTROL NFOLD NLOCK Refer to the section of the quick start guide for a visual NFOLD representation. Osceola, Iowa Cornelia, Georgia Salford, Ontario...
  • Page 3 AB320 Salford Group Inc. 364018 McBeth Rd. Salford, Ontario, N0J 1W0 Phone: 519-485-1293 IGHT ONTROLS ASTER WITCH Rate controller master OWER switch. ONTROLS OWER Osceola, Iowa Cornelia, Georgia Salford, Ontario Elie, Manitoba 1-866-442-1293 www.salfordgroup.com 10103687 NOTE: Use this as a quick start guide. For further details and procedures, refer to the Operator’s Manual provided with the machine.
  • Page 4 AB320 Salford Group Inc. 364018 McBeth Rd. Salford, Ontario, N0J 1W0 Phone: 519-485-1293 OOM CRADLE LOCATIONS → C NLOCKED YLINDER XTENDED NOTE: The difference in the orientation of the plate. → C OCKED YLINDER ETRACTED Osceola, Iowa Cornelia, Georgia Salford, Ontario...
  • Page 5 AB320 Salford Group Inc. 364018 McBeth Rd. Salford, Ontario, N0J 1W0 Phone: 519-485-1293 • Before unfolding/folding, check the machine and surroundings for anything that may cause interference and result in physical damage. • 30 FT of clearance is required behind machine to allow clearance for outer boom section unfold.
  • Page 6 AB320 Salford Group Inc. 364018 McBeth Rd. Salford, Ontario, N0J 1W0 Phone: 519-485-1293 Rear of Machine EVEL WITCH OCATION Represents flip gate handle orientation on the hopper The toggle switch must be in the position if using micro hopper separately via micro roller.
  • Page 7 AB320 Salford Group Inc. 364018 McBeth Rd. Salford, Ontario, N0J 1W0 Phone: 519-485-1293 CTUAL ARGET ETUP RODUCT The last product (PR4 in this image) is fan control. OTALS IAGNOSTICS MPLEMENT ECTION Indicates what section of the machine is active (i.e. on/off).
  • Page 8 AB320 Salford Group Inc. 364018 McBeth Rd. Salford, Ontario, N0J 1W0 Phone: 519-485-1293 ANUAL UTOMATIC OGGLE RODUCT OGGLE RODUCT UTTONS OLUME EMAINING Expressed in terms of PPLIED a percent compared to the tanks capacity. Based on Fill Level URRENT ETERING...
  • Page 9 AB320 Salford Group Inc. 364018 McBeth Rd. Salford, Ontario, N0J 1W0 Phone: 519-485-1293 Select the appropriate tab that corresponds to the bin of interest (if not already selected, double click) Press on the value to edit, determined by operator. setting will...
  • Page 10 AB320 Salford Group Inc. 364018 McBeth Rd. Salford, Ontario, N0J 1W0 Phone: 519-485-1293 Calibration trays are located on the LH side of the hopper To perform a machine calibration the following kit is required: 10076633 – KIT, METERING CAL Hang 5 gal. pails from the bottom...
  • Page 11 AB320 Salford Group Inc. 364018 McBeth Rd. Salford, Ontario, N0J 1W0 Phone: 519-485-1293 1. Prime the meters by running a calibration Set speed & until the meters Navigate to Rate rate to what provide a steady flow Sensor Setup Page you will be of product.
  • Page 12 AB320 Salford Group Inc. 364018 McBeth Rd. Salford, Ontario, N0J 1W0 Phone: 519-485-1293 7. Cycling through the product tabs 3.(Optionally) Enter the bin weights into the VT. complete the following steps: a. Set to 1. Check the position of b. Define the targe rate the hopper bin flip gate c.