1. Manuals
  2. Brands
  3. Salford Manuals
  4. Farm Equipment
  5. I-1100
  6. Assembly & parts manual

Salford I-1100 Assembly & Parts Manual

Hide thumbs Also See for I-1100:
Table of Contents

Advertisement

Quick Links

Download this manual
I-1100 16' Assembly & Parts Manual 2019
Manual #: 10075285
Serial Numbers Starting with 19XXXX

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the I-1100 and is the answer not in the manual?

Questions and answers

Related Manuals for Salford I-1100

Summary of Contents for Salford I-1100

  • Page 1 I-1100 16’ Assembly & Parts Manual 2019 Manual #: 10075285 Serial Numbers Starting with 19XXXX...

  • Page 2: Table Of Contents

    Assembly and Parts Manual 2019 I-1116 10075285 Table of Contents General Information Serial Plate and Paint Code ..........................5 Salford Recommended Torque Values ......................6 Wheel Torque Specifications ........................7 Tire Pressure Ratings ...........................8 General Safety Precautions ........................11 JIC & NPT Torque Specifications ......................12 Hydraulic Hose Bend Specifications ......................13...
  • Page 3 Assembly and Parts Manual 2019 I-1116 10075285 Frame & Coulter Layout Coulter Layout Notes ..........................72 Coulter Cast Mount U-Bolt Tightening Procedure ..................73 1116 Frame Layout ............................74 1116 Coulter Layout...........................75 1116 Frame & Coulter Layout Parts ......................76 Harrow Layouts 16ft Harrow Layout ............................79 Salford Group Inc. Sep-17-2019...
  • Page 4 Return to Contents Assembly and Parts Manual 2019 I-1116 10075285 Notes Page 4 Sep-17-2019 Salford Group Inc.

  • Page 5: Serial Plate And Paint Code

    ATTENTION: If your machine has the decal shown below located next to the serial number plate, the red paint code is EF20824P1. If your machine does NOT have the decal shown below, the red paint code is EF25521P1. Page 5 Sep-17-2019 Salford Group Inc.

  • Page 6: Salford Recommended Torque Values

    Return to Contents Assembly and Parts Manual 2019 I-1116 10075285 Salford Recommended Torque Values Bolt Size Grade 2 Grade 5 Grade 8 Stainless AISI 304 ft-lbs ft-lbs ft-lbs ft-lbs 1/4"NC 5/16”NC 3/8"NC 1/2”NC 5/8”NC 3/4”NC 7/8”NC 1”NC 1234 NOTES: These recommended torque values are applicable when applied to the nut only. These recommended torque values are approximate only.

  • Page 7: Wheel Torque Specifications

    NOTE - Recheck the torque settings of lug nuts/bolts after 10km (6 miles) and again after 50km (30 miles). Periodically and at the beginning of each season check the condition and the torque of the lug nuts/bolts. Page 7 Sep-17-2019 Salford Group Inc.

  • Page 8: Tire Pressure Ratings

    Tires to install Tires to install deep dish out: deep dish in: 12.5L 15 x 19.5 Do not rely on valve stem for orientation of tires. It may face in or out on different rims. Page 8 Sep-17-2019 Salford Group Inc.

  • Page 9: Cylinder Series Identification Guide

    Assembly and Parts Manual 2019 I-1116 10075285 Return to Contents Cylinder Series Identification Guide SALFORD 'B' SERIES HSXXXXB AND HSRXXXXB (MANUFACTURER PART NO. SFXXXXXX) CROSS TUBE STYLE ROD ENDS WELDED TO ROD FORGED CLEVIS STYLE ROD ENDS WELDED TO ROD...

  • Page 10: General Safety Precautions

     Keep all connectors clean for positive connections.  Ensure all fittings and hoses are in good condition and are properly tightened.  NEVER work on or under an elevated machine unless it has been locked up using the transport/maintenance locks. Page 10 Sep-17-2019 Salford Group Inc.

  • Page 11: Signal Words

    NOTE: Indicates points of particular interest for more efficient and convenient repair or operation. A CAREFUL OPERATOR IS THE BEST INSURANCE AGAINST AN ACCIDENT! Page 11 Sep-17-2019 Salford Group Inc.

  • Page 12: Jic & Npt Torque Specifications

    CAUTION: Never back off an installed pipe fitting to achieve proper alignment. Loosening installed pipe NPSM THREAD TORQUE DASH SIZE fittings will corrupt the seal and contribute to leakage SIZE FOOT/LBS. and failure. 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14 1-11 1/2 Page 12 Sep-17-2019 Salford Group Inc.

  • Page 13: Hydraulic Hose Bend Specifications

    Exceeding minimum bend radius will greatly reduce hose assembly life. (USED WITH PERMISSION OF THE ALFAGOMMA GROUP) Page 13 Sep-17-2019 Salford Group Inc.

  • Page 14: Decal Locations

    Return to Contents Assembly and Parts Manual 2019 I-1116 10075285 Decal Locations Page 14 Sep-17-2019 Salford Group Inc.
  • Page 15 Assembly and Parts Manual 2019 I-1116 10075285 Return to Contents Decal Locations Page 15 Sep-17-2019 Salford Group Inc.
  • Page 16 Return to Contents Assembly and Parts Manual 2019 I-1116 10075285 Decal Locations 2200 ITEM NO. QTY. PART NUMBER Description SPEC/QTY. 10016453 DECAL, SALFORD, L, 3.875" X 12.875" 10016620 DECAL, I-1100 10016621 DECAL, I-1200 10016622 DECAL, I-2100 10016630 DECAL, I-2200 10016624...
  • Page 17 Return to Contents Decal Locations Refer to table 10016453 for part #'s 10016641 10016453 10016610 10054341 10016593 10016862 10016856 10016704 10016465 10016857 SERIAL PLATE 10016858 10016859 10016608 Refer to table for part #'s 10016853 10016855 10055273 Page 17 Sep-17-2019 Salford Group Inc.

  • Page 18: Self Levelling Tripod & Depth Control Installation

    Return to Contents Assembly and Parts Manual 2019 I-1116 10075285 Frame Self Levelling Tripod & Depth Control Installation Page 18 Sep-17-2019 Salford Group Inc.
  • Page 19 1 1/4" DIA. x 10 1/2 " LG - 2 HOLE - 4140 10017423 1 1/4" x 3 1/2" SHOULDER PIN HARDENED W/ FLATS 10019442 STROKE CONTROL VALVE WITH FILTER -08 10028232 HOSE CLAMP 3" 10028233 HOSE CLAMP 4" Page 19 Sep-17-2019 Salford Group Inc.

  • Page 20: Tongue Installation

    Return to Contents Assembly and Parts Manual 2019 I-1116 10075285 Tongue Installation Page 20 Sep-17-2019 Salford Group Inc.
  • Page 21 Assembly and Parts Manual 2019 I-1116 10075285 Return to Contents Tongue Installation Page 21 Sep-17-2019 Salford Group Inc.

  • Page 22: Telescope Mount Hose Holder

    10007404 NUT, LOCK, 5/16, NC, GR2, PLATED 10007240 BOLT, CRG, 10-24 X 1/2, NC, A307A, ZINC 10007395 NUT, NYLOCK, #10-24, GR2, PLATED Extra clamps for use on machines requiring more than two sets of hoses. Page 22 Sep-17-2019 Salford Group Inc.
  • Page 23 Assembly and Parts Manual 2019 I-1116 10075285 Return to Contents THIS PAGE INTENTIONALLY LEFT BLANK Page 23 Sep-17-2019 Salford Group Inc.

  • Page 24: Standard Hitch Installation

    AS WELL AS 13 TO 220-250 FT/LBS CAT 4 CAT 4 OPTION: CAT 4 HITCH PART NO: 10023817 OPTION INCLUDES MOUNTING HARDWARE CAT 5 CAT 5 OPTION: CAT 5 HITCH PART NO: 10023819 OPTION INCLUDES MOUNTING HARDWARE Page 24 Sep-17-2019 Salford Group Inc.
  • Page 25 - 10029046 [OBS USE 10059290] CAT 4 CAST IRON HITCH - 10059290 HITCH, BASE, CASTING, CAT 4 - 10059292 HITCH, BASE, CASTING, CAT 3 - 10059296 KIT, ADAPT, CLEVIS, CAT 3 - 10072588 HITCH, BASE, CASTING, CAT 5 Page 25 Sep-17-2019 Salford Group Inc.

  • Page 26: Ball Hitch Installation

    10007339 WASHER, FLAT, STRUCT, F436,HARD,PLATED,1 10007499 NUT, NYLOCK, 1, NC, GR2, PLATED 10028955 HITCH, BALL JOINT, POWER PULL, CAT 3 10028958 HITCH, BALL JOINT, POWER PULL, CAT 4 10028959 HITCH, BALL JOINT, POWER PULL, CAT 5 Page 26 Sep-17-2019 Salford Group Inc.
  • Page 27 Assembly and Parts Manual 2019 I-1116 10075285 Return to Contents THIS PAGE INTENTIONALLY LEFT BLANK Page 27 Sep-17-2019 Salford Group Inc.

  • Page 28: Wing Installation

    Return to Contents Assembly and Parts Manual 2019 I-1116 10075285 Wing Installation Page 28 Sep-17-2019 Salford Group Inc.
  • Page 29 WHEN INSTALLING PINS, WASHERS MUST BE INSTALLED. MAJOR DAMAGE AND OR SERIOUS INJURIES OR DEATH MAY OCCUR IF WASHERS ARE NOT INSTALLED. SEE Cylinder Series Identification Guide PAGE FOR DETAILS ON TYPES OF WINGFOLD CYLINDERS Page 29 Sep-17-2019 Salford Group Inc.
  • Page 30 Return to Contents Assembly and Parts Manual 2019 I-1116 10075285 Wing Installation FASTEN WING RESTS IN PLACE AND USE JAM NUT AND BOLT FOR FINE ADJUSTMENT. 1 5/8" 2 1/4" 2 1/4" Page 30 Sep-17-2019 Salford Group Inc.
  • Page 31 Assembly and Parts Manual 2019 I-1116 10075285 Return to Contents Axles 16ft Wheel & Axle Layout MAIN AXLES - 4 x 9-1/2 CYLINDER 10019297 - 8000LB WHEEL HUBS FRONT - 305/70R 22.5 HWY SERVICE (8 BOLT) (10018021) Page 31 Sep-17-2019 Salford Group Inc.

  • Page 32: Axle Installation

    Return to Contents Assembly and Parts Manual 2019 I-1116 10075285 Axle Installation Page 32 Sep-17-2019 Salford Group Inc.
  • Page 33 1 1/2" x 13 7/8" LG. AXLE PIN - HARDENED 10017423 1 1/4" x 3 1/2" SHOULDER PIN HARDENED W/ FLATS 10018143 ASSY, HUB, 8K, 14 IN, 3 SEAL, W/HW, RED 10054562 TOWER, AXLE, MAIN, 16FT Page 33 Sep-17-2019 Salford Group Inc.

  • Page 34: 8000Lb Hub And Spindle Assembly

    Return to Contents Assembly and Parts Manual 2019 I-1116 10075285 8000lb Hub and Spindle Assembly Page 34 Sep-17-2019 Salford Group Inc.
  • Page 35 10018162 8000 LB V-SEAL KIT Entire assembly available as part number 10018143 (includes hub, spindle, bearings, seal, dust cap, and hardware). Hub assembly without spindle available as part number 10018142 (includes hub, bearings, seal, dust cap, and hardware). Page 35 Sep-17-2019 Salford Group Inc.

  • Page 36: Hydraulics, Lights & Smv

    Return to Contents Assembly and Parts Manual 2019 I-1116 10075285 Hydraulics, Lights & SMV Axle Lift Hydraulics Page 36 Sep-17-2019 Salford Group Inc.
  • Page 37 Test wing fold and adjust hose droop at wings if necessary. • Identify the lift hose ends with red tie wraps for quick hookup to tractor. Route hoses behind tower Leave a droop in hose at wing hinge. Page 37 Sep-17-2019 Salford Group Inc.

  • Page 38: Wing Fold Hydraulics

    Assembly and Parts Manual 2019 I-1116 10075285 Wing Fold Hydraulics (GREEN GREY) (GREEN) Route hoses through hose holder Clamp hoses to underside of telescope Route hoses through rings on tripod CLAMP HOSES TO FRAME Page 38 Sep-17-2019 Salford Group Inc.
  • Page 39 ALWAYS UNFOLD WINGS before working on hydraulics!!! Never work on a lift system with the wings folded. Fig 1. When charging the circuit, prop up cylinder with block of wood. Be sure the rod can extend freely without striking anything. Page 39 Sep-17-2019 Salford Group Inc.

  • Page 40: Light Standards

    Return to Contents Assembly and Parts Manual 2019 I-1116 10075285 Light Standards Page 40 Sep-17-2019 Salford Group Inc.

  • Page 41: Light Bracket Mounting Options

    Return to Contents Light Bracket Mounting Options INNER BRACKET MOUNTING MIDDLE BRACKET MOUNTING OUTTER BRACKET MOUNTING USE THE MOUNTING METHOD WHICH BEST MEETS THE LIGHT SPACING REQUIREMENTS OF THE"LIGHT STANDARDS" PAGE AND THE BRACKET MOUNTING LOCATION Page 41 Sep-17-2019 Salford Group Inc.

  • Page 42: 62" Harrow Arm Red Light Installation

    WITH 8" ANGLED -OR- 22" WITH NO EXTENSION BRACKET INSTALLED EXTENSION STRAIGHT EXTENSION ON FRAME NEW HARDWARE SPECIFIED BY BALLOONS REMOVE ANY HARROW HEAD MOUNTING BOLTS, THEN INSTALL LIGHT KIT BOLTS & REUSED BOLTS AS SHOWN Page 42 Sep-17-2019 Salford Group Inc.
  • Page 43 10015905 VINYL CAP FOR LIGHT BRACKET 10056534 PLATE, LIGHT MNT, REFLECTIVE DECAL 10057081 LIGHT, SAFETY, RED/BLK, BRAKE CIRCUIT *NOTE: THE LIGHTS & WIRING HARNESS ARE AVAILABLE AS A COMPLETE KIT PART #10016941. CONTACT YOUR DEALER FOR DETAILS Page 43 Sep-17-2019 Salford Group Inc.

  • Page 44: 62" Harrow Arm Amber Light Installation

    DECAL - AMBER REFLECTOR, 2 X 9 10016945 EXTENSION, LIGHT KIT, WESBAR, 10 FT CORD NOTE: THE LIGHTS & WIRING HARNESS ARE AVAILABLE AS A COMPLETE KIT PART # 10016941 CONTACT YOUR DEALER FOR DETAILS Page 44 Sep-17-2019 Salford Group Inc.

  • Page 45: Smv & Parking Stand Installation

    10009452 REAR PARKING STAND MOUNT FOR 5" AND 6" BEAM 10009830 550 PARKING STAND 10016132 2 1/2" SQUARE PLASTIC PLUG 10016222 SMV SIGN 10016887 #11 HAIR PIN 10017069 5/8'' DIA x 4 1/4'' PIN RING & WASHER 10024778 OFFSET SMV MOUNTING BRACKET Page 45 Sep-17-2019 Salford Group Inc.

  • Page 46: Extended Rear Parking Stand - Optional

    Mount parking stand between tines and roller. Insure parts do not collide with parking stand during operation. ATTENTION: Always operate machine with parking stand tube in stored position. Jack may contact ground if not stored properly and cause damage. Page 46 Sep-17-2019 Salford Group Inc.
  • Page 47 Assembly and Parts Manual 2019 I-1116 10075285 Return to Contents THIS PAGE INTENTIONALLY LEFT BLANK Page 47 Sep-17-2019 Salford Group Inc.

  • Page 48: Tow Hitch Installation

    Return to Contents Assembly and Parts Manual 2019 I-1116 10075285 Tow Hitch (Optional) Tow Hitch Installation Page 48 Sep-17-2019 Salford Group Inc.
  • Page 49 1" MACHINE BUSHING 10017110 PIN 1" DIA. x 5" LG. - 2 HOLES 10017184 1 1/4" x 6 1/2" LG. PIN - 1 HOLE 10017444 RING & WASHER TOW HITCH SPRING PIN 10031018 TOW HITCH CLEVIS Page 49 Sep-17-2019 Salford Group Inc.

  • Page 50: Tow Hitch Hydraulics

    Return to Contents Assembly and Parts Manual 2019 I-1116 10075285 Tow Hitch Hydraulics (for independent HYD. control) (BLUE GREY) RETURN FEED (BLUE) HOSE LENGTH: (2x) 44' Double stack hoses with existing wing hydraulic hoses RETURN FEED Page 50 Sep-17-2019 Salford Group Inc.
  • Page 51 HOSE, 08 MNPT (2), 1/2, 528 IN 10028232 HOSE CLAMP 3" HOSE KIT FOR TOW HITCH TO TRACTOR AVAILABLE AS PART # 10024020 NOTE: Make sure hoses are not going to interfere with the hydraulic cylinders. Page 51 Sep-17-2019 Salford Group Inc.

  • Page 52: Tow Hitch Light Harness Extension

    Return to Contents Assembly and Parts Manual 2019 I-1116 10075285 Tow Hitch Light Harness Extension PLUG TO TRACTOR FROM TRACTOR 5 PIN PLUG TO TOW HITCH Page 52 Sep-17-2019 Salford Group Inc.
  • Page 53 Return to Contents Tow Hitch Light Harness Extension ITEM QTY PART NO. DESCRIPTION 10061069 CABLE, TOW HITCH, EXTN, 5 WIRE 10007315 5/16" FLATWASHER 10006954 5/16" X 1" HEX BOLT GR. 5 10007404 5/16" LOCK NUT Page 53 Sep-17-2019 Salford Group Inc.

  • Page 54: Coulter Assembly

    Otherwise leave it loose enough that the coulter can swivel easily. Ensure scraper covers grease fitting on hub 1 Available Without Hub Must be stover locknuts (crimp type). Nylock nuts are too long to fully engage threads. Page 54 Sep-17-2019 Salford Group Inc.
  • Page 55 10010092 RTS CAST MOUNT SWIVEL STOP 10051731 MOUNT, CAST, 1-1/4 SPRING, MULT-USE IMPORTANT WHEN OPERATING IN HARD GROUND WITH DROP MOUNTS, SET MOUNTS IN HIGHEST POSITION TO AVOID SPRING BREAKAGE. LEFT RIGHT As viewed from rear of machine Page 55 Sep-17-2019 Salford Group Inc.

  • Page 56: Bolt Coulter Hub Assembly

    PART GREASE & SEALANT TUBES NUMBER 10016194 KENDALL SHP #2 GREASE (TUBE @ 425g) 10016195 KENDALL SHP #2 GREASE (CASE,10 @ 425g) 10032015 SEALANT (SMALL TUBE @ 95g) 10032014 SEALANT (LARGE TUBE @ 368g) Page 56 Sep-17-2019 Salford Group Inc.
  • Page 57 4. Adjust the nut to align the nearest slot with the hole in the spindle. Hub must be able to rotated relatively freely. Also it should be tight enough so that it cannot slide back and forth on the spindle more than .005" (0.13mm). Page 57 Sep-17-2019 Salford Group Inc.

  • Page 58: Harrow Parts

    12 & 28-41ft use slot "A" for 20" blades. 12 & 28-41ft use hole "B" for 17" blades. Use bottom hole for roller stop. Place tine harrow pin here (bottom hole) REAR SET RAKE ANGLE Page 58 Sep-17-2019 Salford Group Inc.
  • Page 59 Assembly and Parts Manual 2019 I-1116 10075285 Return to Contents THIS PAGE INTENTIONALLY LEFT BLANK Page 59 Sep-17-2019 Salford Group Inc.

  • Page 60: Tine Performance Settings

    Assembly and Parts Manual 2019 I-1116 10075285 Tine Performance Settings TINES ARE ADJUSTABLE FOR BETTER RESIDUE FLOW USE BOTTOM BOLT HOLE FOR "STANDARD" SETTING STANDARD SETTING SHOWN HERE USE TOP BOLT HOLE TO ANGLE TINES ANGLED SETTING SHOWN HERE Page 60 Sep-17-2019 Salford Group Inc.
  • Page 61 DIFFERENT HOLE FOR MORE HEIGHT SETTING RANGE L PIN FRAME HEIGHT DECREASE ADJUSTER INCREASE SPRING TENSION ADJUSTING TOOL PITCH ADJUSTER SWITCHING HOLES WILL CHANGE THE ANGLE OF THE SECTION CHANGING HOLES WILL ADJUST PITCH OF TINES Page 61 Sep-17-2019 Salford Group Inc.

  • Page 62: 62" Harrow Arm Assembly

    S-TINE CULTIVATOR HOLE SIZES (WINGS ONLY) MODEL "D" POSITION 20', 28', 31', 36', 41' 3pc I-1100 TO I-4200 16', 24', 41'-5pc, 50', 60' 19', 22', 25', 36' 3pc, 39' I-5100 ALL OTHER 16', 29', 36' 5pc, 42' MACHINES ALL SIZES 9700/9800 "A,B,C"...
  • Page 63 10029446 7/8'' OD x 5/8" ID NYLATRON BUSHING 10029447 HEAD, UPPER, HARR, 5/8 PIVOT BOLT 10029474 ROLLER ARM STOP BRACKET 10013362 RUBBER PIVOT JOINT CLAMP 10029554 62" HARROW ARM, RUBBER PIVOT 10029741 TIGHTENER,SINGLE SPRING Page 63 Sep-17-2019 Salford Group Inc.

  • Page 64: 14" Shaftless Roller

    Assembly and Parts Manual 2019 I-1116 10075285 14” Shaftless Roller INSTALL GREASE DECAL TOWARDS REAR OF FRAME PT# 10016465 4' 0" RH ROLLER SHOWN NOTE: BEARING HAS AN GREASELESS OPTION 10053109 - BRG, 1-1/2 ID, OPEN FLG, GREASELESS Page 64 Sep-17-2019 Salford Group Inc.
  • Page 65 BOLT, CB, 1/2 X 1-1/2, NC, GR5, PLATED 10007435 NUT, STOVER, 1/2, NC, GRC, PLATED 10014200 ROLLER BASKET GREASE FITTING GUARD 10016461 SMALL SALFORD DECAL FOR ROLLERS 10016465 GREASE EVERY 100 HOURS DECAL 10016495 HARROW DIRECTION DECAL FRONT - BACK Page 65 Sep-17-2019 Salford Group Inc.

  • Page 66: 14" Shafted Roller

    Return to Contents Assembly and Parts Manual 2019 I-1116 10075285 14” Shafted Roller Page 66 Sep-17-2019 Salford Group Inc.
  • Page 67 1/2"-13NC STOVER LOCK NUT 10007520 1 1/4" NC CENTER STAKED LOCK NUT 10016273 1 1/2" BEARING COMPLETE 10016461 SMALL SALFORD DECAL FOR ROLLERS 10016495 HARROW DIRECTION DECAL FRONT - BACK 10016466 GREASE EVERY 100 HOUR WITH WARNING 10016881 1/4"-28NF GREASE FITTING 14"...

  • Page 68: 1/2" Tine Harrow Assembly

    Return to Contents Assembly and Parts Manual 2019 I-1116 10075285 1/2” Tine Harrow Assembly Page 68 Sep-17-2019 Salford Group Inc.
  • Page 69 10007430 NUT, NYLOCK, 1/2, NC, GR2, PLATED 10007412 NUT, NYLOCK, 3/8, NC, GR2, PLATED 10007448 NUT, NYLOCK, 5/8, NC,GR2,PLTD,COLFIN LUB 10007709 U-BOLT 5/8" x 2 1/2" x 4" 10029471 VINYL HANDLE FOR TINE ADJUSTMENT Page 69 Sep-17-2019 Salford Group Inc.

  • Page 70: Tine Dimensions

    C-CHANNEL CAN GO IN 1 OF 2 SPOTS 6 TINE 319 12-5/8" 20" 20" 20" 20" 406 16" 487 19-1/4" 406 16" 403 15-7/8" 1016 40" 1016 40" C-CHANNEL CAN GO IN 1 OF 3 SPOTS Page 70 Sep-17-2019 Salford Group Inc.

  • Page 71: Roller Mud Flap

    Assembly and Parts Manual 2019 I-1116 10075285 Return to Contents Roller Mud Flap Page 71 Sep-17-2019 Salford Group Inc.

  • Page 72: Frame & Coulter Layout

    Return to Contents Assembly and Parts Manual 2019 I-1116 10075285 Frame & Coulter Layout Coulter Layout Notes BEFORE you begin installing coulters, be sure that you have the correct coulter layout. Page 72 Sep-17-2019 Salford Group Inc.

  • Page 73: Coulter Cast Mount U-Bolt Tightening Procedure

    Do not over tighten mount, Bending of the mount may occur if over tightened NOTICE: Even or equal tightening of each U-bolt leg is critical. Check ¾” u-bolts especially for proper contact with frame tubing Page 73 Sep-17-2019 Salford Group Inc.

  • Page 74: 1116 Frame Layout

    Return to Contents Assembly and Parts Manual 2019 I-1116 10075285 1116 Frame Layout Page 74 Sep-17-2019 Salford Group Inc.

  • Page 75: 1116 Coulter Layout

    Assembly and Parts Manual 2019 I-1116 10075285 Return to Contents 1116 Coulter Layout Page 75 Sep-17-2019 Salford Group Inc.

  • Page 76: 1116 Frame & Coulter Layout Parts

    LOOSE LOOSE RIGID COULTER IMPORTANT!! IF SWIVEL IF SWIVEL MOUNT SIDE COULTER SWIVEL SIDE LOCKED MOUNT NOTE WHICH SIDE OF BEAM TO MOUNT PAY ATTENTION THE COULTER TO ORIENTATION OF COULTERS 1 5/8" COIL Page 76 Sep-17-2019 Salford Group Inc.
  • Page 77 Assembly and Parts Manual 2019 I-1116 10075285 Return to Contents THIS PAGE INTENTIONALLY LEFT BLANK Page 77 Sep-17-2019 Salford Group Inc.

  • Page 78: Harrow Layouts

    3ft Roller # 4ft Roller # 5ft Roller # 6ft Roller # 4ft Roller # 5ft Roller # 6ft Roller # 10027594 10027596 10027599 10027603 10027609 10027610 10027611 12ft 16ft 20ft 24ft 28ft 31ft 36ft 41ft - 3pc 41ft - 5pc 50ft (1100, 1200, 2100, 4100) 50ft (2200/4200) 60ft Page 78 Salford Group Inc. Sep-17-2019...

  • Page 79: 16Ft Harrow Layout

    Assembly and Parts Manual 2019 I-1116 10075285 Return to Contents 16ft Harrow Layout Page 79 Sep-17-2019 Salford Group Inc.
  • Page 80 Salford Group Inc. 364018 McBeth Road, N0J 1W0 Salford, Ontario Canada www.salfordgroup.com 1-866-442-1293...

Table of Contents