FUTABA 8FG Instruction Manual page 35

1. Model addition and selection
already set.
The T8FG is capable of storing data for up to 20
models in its internal memory. Additional model
data can also be saved to an optional SD card.
The currently selected model name is displayed
model name.
select screen and FASST mode/Area select setup
Select the model type matched to the aircraft
among the 2 types: airplane and glider. And then
the aircraft.
manual. For a description of the connection
Note that even for the same "airplane
model", when the wing type and tail type
are different, the channel assignment may
be different. (The channel assigned to each
function can be checked at the Function
menu of the Linkage Menu.)
the direction with the Reverse function of the
Linkage Menu.
surface angle with the linkage, and fine
tune them with the Sub-Trim and End Point
functions (angle adjustment). To protect the
linkage, a limit position can also be set with
the End Point function. The End Point function
can adjust the amount of up/down and left/
right movement and limit of each channel.
position so that the carburetor becomes fully closed.
35