FUTABA 7C-2.4GHZ Instruction Manual page 55

GOAL of EXAMPLE:
Set up a Smoke system:
ON when S
E is in the
WITCH
down position.
*Adjust the CH7 switch to NULL
prior to this setting. See page. 28.
Where next?
Other Examples:
• RUD-THR(HELI) mix: When right rudder is applied, additional torque is needed from the motor to drive the tail left. Left
rudder requires less torque. A rudder-throttle mix, positive on the left side and negative on the right, adjusts for this.
• RUD-ELEV(ACRO) mix: Compensate for pitching up or down when rudder is applied.
• ELEV-PIT(HELI) mix: Compensate for the loss of lift when tilting the model.
STEPS:
Open an unused programmable mix.
(Ex: use PROG .MIX3.)
Activate the function.
Choose master and slave channels.
Assign S and position.
WITCH
(Ex: E DOWN.)
Set rates. (Ex: Lo=100%, Hi=0%.)
Set OFFSET, if needed.
Close menu.
View numerous additional mix setups:
55
INPUTS:
for 1 second.
(If basic,
to PROG .MIX3.
to CH3.
to CH7.
to E DOWN.
T S
HROTTLE TICK
to +100%.
T S
HROTTLE TICK
to 0%.
Stick
to desired point.
for 1 second to set.
www.futaba-rc.com\faq\faq-7c.html.
again.)
past center.
past center.