Second Solid-State Drive (M.2 2230) (Select Products Only) - HP ProBook 4 G1a Maintenance And Service Manual

4. When installing an SSD, be sure a thermal pad is installed on the bottom of the drive bracket as
shown in the following illustration.
To install the M.2 2280 SSD, reverse the removal procedures.
NOTE: SSDs are designed with a notch to prevent incorrect insertion.

Second solid-state drive (M.2 2230) (select products only)

To remove the second SSD, use this procedure and illustration.
You can install only one of the following modules in the computer, because they share the same slot on
the system board:
● Second SSD (M.2 2230)
46 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts