Honda 08U97-3BM-111 Installation Instructions Manual

Heated steering wheel 2026 passport

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

www.collegehillshonda.com

HEATED STEERING WHEEL

GENERAL VIEW

STEERING WHEEL

CONTROL UNIT

SWITCH

INSTALLATION INSTRUCTIONS

2026 PASSPORT

MODEL SERIES

AII

JAN. 2025

Publications No.

VERSION 1

08U97-3BM-1000-90 1 / 33

Table of Contents

Need help?

Do you have a question about the 08U97-3BM-111 and is the answer not in the manual?

Questions and answers

Summary of Contents for Honda 08U97-3BM-111

Page 1 INSTALLATION INSTRUCTIONS JAN. 2025 2026 PASSPORT Publications No. HEATED STEERING WHEEL VERSION 1 MODEL SERIES GENERAL VIEW STEERING WHEEL CONTROL UNIT SWITCH 08U97-3BM-1000-90 1 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 2: Warning Symbols
Gives advice to prevent damage to the product, vehicle, the environment or other property. NOTE Gives helpful information or instructions to be followed when installing this product. Indicates a prohibited action. 08U97-3BM-1000-90 2 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 3 Apply firm pressure while rolling, especially at Press firmly. the ends, to set the adhesive. Clean with isopropyl alcohol. Return the original part to the customer. (Do not reuse.) 08U97-3BM-1000-90 3 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 4: Safety: General
Note the locations of the parts before removing them so they can be properly installed in their original positions. • The illustrations may differ slightly from the actual accessory. Safety: Electric Parts Always disconnect the negative cable from the battery before beginning work. 08U97-3BM-1000-90 4 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 5: Parts List
Parts Parts name Remarks Steering wheel Steering wheel cover Switch trim Switch Control unit Cable reel Cable reel cord Self-tapping screw Washer-screw Steering wheel bolt Information 08U97-3BM-1000-90 5 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 6: Required Tools And Supplies
• Masking tape • Ruler • Steering wheel puller The following tools are available through the Honda Tool and Equipment Program: • Trim Tool Set (T/N SOJATP2014) • Plastic Trim Tool (T/N SILTRIMTL10) 08U97-3BM-1000-90 6 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 8 NOTE Follow the “12 Volt Battery Terminal Disconnection and Reconnection” described in the service information since the work differs depending on the vehicle. Lower. Record. Disconnect. 08U97-3BM-1000-90 8 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 9 Adjust the tilt of the steering column to its lowest position. Then bring the telescope position to all the way out. STEERING WHEEL STEERING WHEEL COVER SPRING (Push.)(2) HOLE(2) PUNCH (diameter of 5.5 mm) AIRBAG SPRING (Push.) HOLE Release the airbag. 08U97-3BM-1000-90 9 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 10: Vehicle Connectors
Place the removed airbag in a safe place with the padded surface (top) facing upward. VEHICLE CONNECTORS AIRBAG (inside) LOCKING TAB (Pull up.)(2) PADDED SURFACE (Facing upward.) 08U97-3BM-1000-90 10 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 11 If you thread the steering wheel puller bolts into the wheel hole more than 5 threads, the bolts will hit the cable reel and damage it. To prevent this, install a pair of jam nuts 5 threads up on each puller bolt. 08U97-3BM-1000-90 11 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 12 Attach masking tape to protect the vehicle. NOTE To prevent damage, do not remove the masking tape until after the parts are installed. MASKING TAPE STEERING COLUMN UPPER COVER 08U97-3BM-1000-90 12 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 13 Release the steering column upper cover. NOTE Work in the order shown. SLOT(2) PLASTIC TRIM TOOL RETAINING TAB(4) MASKING TAPE DASHBOARD Secure the steering column upper cover. 08U97-3BM-1000-90 13 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 15 Driver's Dashboard Lower Cover Release the driver's dashboard lower cover. DRIVER'S DASHBOARD LOWER COVER SELF-TAPPING SCREW CLIP(4) 08U97-3BM-1000-90 15 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 16: Self-Tapping Screw
Steering Column Lower Cover Remove the self-tapping screws. SELF-TAPPING SCREW(2) Remove the steering column lower cover. STEERING COLUMN LOWER COV- CLIP 08U97-3BM-1000-90 16 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 18: Installing The Steering Wheel
Installing the Steering Wheel Install the new cable reel. NEW CABLE REEL SELF-TAPPING SCREW(2) RETAINING TAB 08U97-3BM-1000-90 18 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 19 VEHICLE 2-PIN CONNECTOR DUMMY CONNECTOR TAPE Plug-in the vehicle connectors. Install the steering column lower cover, driver's dashboard lower cover, driver's switch panel, and steering column upper cover. 08U97-3BM-1000-90 19 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 20 Remove the steering wheel trim. STEERING WHEEL RETAINING TAB VEHICLE CONNECTORS STEERING WHEEL TRIM RETAINING TAB(8) WASHER-SCREW(2) Remove the washer-screws. WASHER-SCREW(3) 08U97-3BM-1000-90 20 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 21 Remove the steering wheel cover. STEERING WHEEL COVER RETAINING TAB(4) Remove the left and right paddle shifters. VEHICLE CONNECTORS LEFT PADDLE SHIFTER RETAINING TAB(4) RIGHT PADDLE SHIFTER 08U97-3BM-1000-90 21 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 23: Control Unit
NEW CABLE REEL CORD 14-PIN CONNECTOR CONTROL UNIT SELF-TAPPING SCREW(2) NEW CABLE REEL CORD 4-PIN CONNECTOR Secure the new cable reel cord connector. Install the control unit. 08U97-3BM-1000-90 23 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 24 Plug-in the new steering wheel connector. NEW STEERING WHEEL WASHER-SCREW (supplied)(2) NEW STEERING WHEEL 4-PIN CON- NECTOR NEW CABLE REEL CORD 4-PIN CONNECTOR RETAINING TAB(4) Install the new steering wheel cover. 08U97-3BM-1000-90 24 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 25 Secure the new cable reel cord ground terminal. WASHER-SCREW (supplied) NEW CABLE REEL CORD GROUND TERMINAL Install the switch. SWITCH TRIM SWITCH SELF-TAPPING SCREW(3) 08U97-3BM-1000-90 25 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 26: Right Switch
NEW CABLE REEL CORD 16-PIN CONNECTOR(2) RETAINING TAB(8) RIGHT SWITCH WASHER-SCREW (supplied)(2) SWITCH LEFT SWITCH NEW CABLE REEL CORD 5-PIN CONNECTOR Install the steering wheel trim. 08U97-3BM-1000-90 26 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 27: Locking Pin
Make sure the front wheels are pointing straight-ahead. Rotate the new cable reel clockwise until it stops. Rotate counterclockwise until the arrow mark on the new cable reel points up. 08U97-3BM-1000-90 27 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 28 Rotate the new cable reel counterclockwise 2 full turns. NOTE The arrow mark on the cable reel should point straight up. 08U97-3BM-1000-90 28 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 29 NEW STEERING WHEEL BOLT (sup- plied) NEW STEERING WHEEL OPENING NEW CABLE REEL CORD NEW CABLE REEL 2-PIN CONNEC- TORS CORD (Route under the new cable reel cord.) 08U97-3BM-1000-90 29 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 30 Make sure to use the replacement steering wheel bolt provided in this kit. Plug-in the new cable reel cord connector. NEW CABLE REEL NEW CABLE REEL CORD 20-PIN CONNECTOR NEW CABLE REEL CORD 2-PIN CONNECTOR 08U97-3BM-1000-90 30 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 31 NEW CABLE REEL CORD 1-PIN CONNECTOR NEW CABLE REEL 2-PIN CONNEC- TOR (black) NEW CABLE REEL 2-PIN CONNEC- TOR (light gray) AIRBAG (inside) Equal spacing. STEERING WHEEL TRIM AIRBAG 08U97-3BM-1000-90 31 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 32: Check After Installation
NEGATIVE CABLE Install the resonator. Turn the ENGINE START/STOP button to ON; the SRS indicator should come on for about 6 seconds and then go off. 08U97-3BM-1000-90 32 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.
Page 33: Vehicle Check
Press and hold the audio unit power button for 2 seconds to restore the audio and navi (if equipped) system functions. Check/Restoration and Learning Operations NOTE Refer to the service information. Connect the i-HDS, and clear the DTCs if needed. 08U97-3BM-1000-90 33 / 33 © 2025 American Honda Motor Co., lnc. -All Rights Reserved.

Honda 08U97-3BM-111 Installation Instructions Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Honda 08U97-3BM-111

Summary of Contents for Honda 08U97-3BM-111

Table of Contents