Working With Multiple Tools - Wacom INTUOS4 WIRELESS Manual

WORKING WITH MULTIPLE TOOLS

The Wacom Tablet control panel is designed to help you customize and keep track of the settings for your
tools. The tool you use to open the control panel is automatically selected, and the appropriate
Intuos4
tabs for that tool are displayed.
The T list displays an
OOL
icon for the tablet
F and the different
UNCTIONS
tools that have been used
on the tablet.
If application-specific
settings have not been
added, the A icon is
LL
displayed and the tool
settings apply to all
applications.
To add a different tool to the control panel's T
• When you select a tool that has been added to the T
are displayed. Any changes you make to the tab settings will then apply to that tool. Your changes
take effect immediately.
• Identical tools will use the same settings.
To remove a selected tool from the T
appears, click D
ELETE
custom settings you may have created for it. (A removed tool can be added back to the T
it back onto the tablet.)
All Intuos4 pens have a unique Tool ID. In supporting applications, such as Corel Painter, you can assign
different tools to different pens and then change between them by switching the pen in your hand.
Contents
Tab settings apply only to the
selected tool and application.
list, click on the T
OOL
to confirm your selection. The selected tool is removed from the list, along with any
Contents
Index
list, simply use the tool on your Intuos4 tablet.
OOL
list, the appropriate tab settings for that tool
OOL
list's [ – ] button. In the dialog box that
OOL
Index
Select a tool to change its settings.
Removes the
selected tool.
The button is
inactive when there
is only one item in
the list.
The F
icon cannot be
deleted.
OOL
60
UNCTIONS
list by placing
60