Advertisement
Quick Links
User Manual
Set up your device
1. First, follow the directions in this section of user help. The Quick Start Guide included in
the box contains images that can help.
o
Attach any stands that are included with your device.
o
Set up your work area.
2. After you set up your device, follow the directions in the Get started section of this user
help so you can start using your device.
o
Connect your device to your computer.
o
Install the driver
Set up your work area
Position your tablet, pen, and keyboard for easy access.
Adjust your monitor so you can view it comfortably without eyestrain, placing it about
one arm's length away from you.
Position the tablet so the screen cursor follows the same direction as your hand
movements on the tablet.
If you are using the tablet as a creative tool, consider placing the tablet below the
keyboard and centered below your monitor.
Install the driver
Important: You must install the driver for your device to work properly, unless your device
comes with a pre-installed driver. Refer to the Quick Start Guide to discover if your device has a
pre-installed driver or not.
1. Go to the Wacom drivers page.
2. Click Download next to the latest driver that corresponds to your computer's operating system.
3. Follow the prompts to finish the driver installation.
Update the driver
Updated drivers are available on the Wacom Desktop Center and at the Wacom drivers page
periodically. Check in and update regularly so that your device has the latest features and
functionality.
From the Wacom Desktop Center, select Updates, and then click the update to install it.
If the Wacom Desktop Center is not available for your device, go to the Wacom drivers page to
find the latest updates.
Advertisement
Related Manuals for Wacom Intuos Pro L
Summary of Contents for Wacom Intuos Pro L
- Page 1 From the Wacom Desktop Center, select Updates, and then click the update to install it. If the Wacom Desktop Center is not available for your device, go to the Wacom drivers page to find the latest updates.
- Page 2 Note: Your device will not work if you uninstall the driver. If you uninstall the driver, reinstall the latest driver from the drivers page so that your device works again. If the driver is reinstalled, your device will revert to default settings. Stand Setup and Usage There are two built-in stand legs.
-
Page 3: Work With Your Pen
2. Remove the color ring that is already on the pen and slide on your preferred color ring. 3. Replace the cone. Specialty pens Pens designed for more advanced work, such as the Wacom Pro Pen 3D, Art Pen, or Airbrush, can be used with many pen tablets and pen displays. Use your pen... - Page 4 Pen buttons Use pen buttons as shortcuts to settings. You can view and change the assigned settings on the Pen tab in Wacom Tablet Properties. Note: Some pens do not have buttons. You activate settings differently depending on your Pen Button mode.
-
Page 5: Store Your Pen
If your pen has a long, thin button, press the upper part of the button for one setting and the lower part for another. Store your pen Store your pen properly keep it in good condition and help the pen tip last longer. Important: Store your pen so there is no pressure on the pen tip or eraser. -
Page 6: Use Your Pen With Windows Ink
Windows Input Panel: Use handwriting or an on-screen keyboard to directly enter text with your Wacom pen. Note: The Pen Flicks and press-and-hold-to-right-click features are disabled in some graphics applications. Windows Ink is ON by default. If you want to turn OFF Windows Ink, unselect Use Windows Ink in Wacom Tablet Properties. - Page 7 Eraser Select the Eraser tab to adjust eraser sensitivity. Use the Eraser Feel slider to customize the amount of pressure needed to erase. From the Erase dropdown menu, select the function to perform when using the eraser. Click Customize to further adjust the eraser sensitivity.