Notice DIGI ® The material contained in this document is proprietary and for information only and is subject to change without notice. Teraoka Weigh-System assumes no responsibility for any errors or damages arising from misinterpretation of any procedure. Screen displays, operating procedures and supporting features might vary with different software version releases.
Safety Information The operator of the equipment shall comply with the safety and warning indications and procedures outlined in this document. Teraoka Weigh-System Pte Ltd assumes no responsibility or liability for failure to comply with these requirements. • Repair and servicing of product, shall only be carried out by trained and qualified personnel.
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna.
Page 6
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
IB-3500 Base Station Service Manual 1. General Model Specification Model IB-3500 Dimensions (in mm) Body Casing - 230(L) x 210(W) x 51(H) Dimension With Upright Antenna - 230(L) x 210(W) x 205.5(H) Color White LED (x4) - Power Indicator Green...
IB-3500 Base Station Service Manual DC Specification Power Source External : Ethernet Cable from POE Switch Port (48 Volt DC) Internal Operating Temperature 10ºC to +40ºC Humidity 85% Max. Non-condensing RF Specification RF Standard ARIB STD-T66 NCC, C-TICK, IC, CE...
IB-3300 Base Station Service Manual 3. IB-300 Station Setup Diagram & Spec Setting 3.1 Setup Diagram Front View Top View ANTENNA TX LED RX LED Power LED Reset Button Reset LED Ethernet (POE Port) LED / BUTTON Descriptions • Power On Indicator. Power LED (Red) •...
IB-3300 Base Station Service Manual 3.2 RF Station Setup Ethernet Ethernet POE Switch Straight Cable Straight Cable RF Station PROCEDURE PICTURE 1) Double click open the [Internet Explorer] icon. 2) In the Web Browser, key in the RF Station IP address [192.168.50.49] accesses to RF Station Setting main screen.
Page 12
IB-3300 Base Station Service Manual 5) Repeat the Step 2, and keying the new IP Address to checking the setting is changed. Note: Ensure the PC IP Address is also change to under same network. (Example: 192.168.50.123)
IB-3100 Base Station Service Manual 4. Revision Records Serial Edition Software Remarks Date Description of Changes Status Version DEC ‘13 First Release JAN’13 Update IC statements...
Need help?
Do you have a question about the IB-3500 and is the answer not in the manual?
Questions and answers