Using The Side Switches; Drawing With Pressure-Sensitivity - Wacom GRAPHIRE 4 User Manual

Using the side switches

The Graphire4 pen is equipped with two side switches. Each switch has a programmable function that is
selected when you press the switch. You can use a side switch whenever the pen tip is within 5 mm
(0.20 inch) of the tablet active area. You do not have to touch the pen tip to the tablet in order to use a
switch.
The upper switch is set to D
lower switch is set to R
IGHT
Hints:
• Press the upper side switch to double-click. This is easier than tapping
twice with the pen tip.
• Use a right-click to bring up application-specific or icon-specific menus.
To assign new switch functions, see

Drawing with pressure-sensitivity

The Graphire4 pen responds to the nuance and inflection of your hand movements, enabling you to create
natural-looking pen and brush strokes. Many graphics applications have drawing tools that respond to the
pressure you place on the pen. For example, in some drawing programs sliders are used to vary brush
characteristics (width, color, and opacity). These characteristics can be controlled much better by the pen's
pressure-sensitivity – you can vary line width, blend colors, and change opacity with the pressure you exert
upon the pen.
To draw with pressure-sensitivity, first select a pressure-
sensitive tool from your application's tool palette. Then draw
along the surface of the tablet while applying various amounts
of pressure downward on the tip of the pen. Press hard for
thick lines or dense color. Press gently for thin lines or softer
color. To adjust the tip feel, see
and double-click.
Visit our web site for a list of graphics applications that support
pressure. See product information.
C
ONTENTS
C , and the
OUBLE LICK
C by default.
LICK
customizing the side
adjusting tip feel, eraser feel,
C
ONTENTS
I
NDEX
switches.
I
NDEX
W G
ORKING WITH RAPHIRE
12
12
4