Wacom DTU-710 - MANUAL 2 User Manual page 3

CAUTION
Do not put heavy articles on DTU-710; this may damage the display screen
or stand.
Do not place heavy article on DTU-710 cabling, repeatedly bend the
cables, or apply heavy stress on the cable connectors; this may damage the
unit or your cabling.
This product is for use with a VGA or DVI graphics card; using an
inappropriate graphics card may damage DTU-710.
Do not connect or disconnect the DVI video cable or power cable while
DTU-710 and your computer is turned on; it may damage the LCD display or
computer video card.
Do not disassemble DTU-710 or pen. This may cause DTU-710 or pen to
malfunction. In this case, Wacom shall have no responsibility to repair or replace
the product.
Do not use or store DTU-710 where:
- Temperature changes are severe (e.g., outdoors or inside a vehicle).
- DTU-710 and pen are exposed to direct sunlight or heat from a heating appliance.
- DTU-710 and pen are exposed to water or any other kind of liquid.
- Temperature or humidity exceeds the specifications.
Do not block the ventilation holes in the rear panel; this may overheat and
damage DTU-710.
Do not use DTU-710 in a dusty environment; It may damage the unit.
Do not scratch the cover glass of DTU-710. Avoid placing sharp objects on
the glass surface.
Do not use detergent to clean the cover glass of DTU-710; this may alter the
surface friction and deteriorate the handwriting feel.
3