Radio; Built-In Afc; Antennas; Turning On The Radio - GE 75350 User Manual

Radio

Built-In AFC

The Built-In Automatic Frequency Control (AFC)
works only on FM. It helps to reduce drift on FM
reception and to keep the radio locked in on the
EN
FM station to which it is tuned.

Antennas

AM Antenna - A built-in ferrite rod antenna
eliminates the need for an outside antenna for
AM reception. Rotating the unit slightly may
improve reception of distant AM stations.
FM Antenna - The power cord acts as your FM
antenna. The power cord picks up moderate to
strong stations and eliminates the need for an
external antenna in most strong signal areas. Be
sure the power cord is stretched out to its full
length. Do not coil or bunch the cord together.
Changing position of the power cord may improve
reception.

Turning on the radio

Press RADIO ON / BAND to turn on the radio.
Turning off the unit
Press OFF to turn off the radio.

Adjusting volume

Press VOL - to decrease volume level.
Press VOL + to increase volume level.
Selecting radio / TV band
Press RADIO ON / BAND to select between FM,
AM and TV band.
11

Tuning to a station/channel

Press to tune down radio frequency or
select the previous TV channel.
Press to tune up radio frequency or select
the next TV channel.
Note:
The display will return to the clock time
after displaying the station fequency or
channel number for a few seconds. To view the
current station frequency or channel number,
press or .
Automatic station/channel
search
Press and hold or for more than 1
second and release to start automatic station/
channel search in the direction selected.
Search will stop once a station is found.
Tips:
Press or to quit automatic
station/channel search.
Radio

Radio frequency memory

1. Follow steps in "Selecting Radio Band" and
"Tuning to a Station/Channel" to tune to the
station you want to store into memory.
2. Press SET to assign the next available memory
location to the selected station.
"P" will flash with the next available memory
location light on the display
If you wish to assign another memory location
or overwrite a previously set memory, press
PRESET (MEMO RECALL on remote control)
repeatedly to select the memory location.
3. Press SET again to confirm selection.
Tips: Press and hold SET for around 4
seconds to delete a selected preset
radio station. The memory location will
become empty.
A Maximum of 10 preset memory locations
are available.

Memory recall

Press PRESET (MEMO RECALL on remote control)
repeatedly to recall preset stations.

TV band

CH 2-13 are available for TV Band.
The TV indicator and the channel number lights on
the display when TV band is selected.
TV Band
ch 2 59.75 MHz
ch 3 65.75 MHz
ch 4 71.75 MHz
ch 5 81.75 MHz
ch 6 87.75 MHz
ch 7 179.75 MHz
ch 8 185.75 MHz
ch 9 191.75 MHz
ch 10 197.75 MHz
ch 11 203.75 MHz
ch 12 209.75 MHz
ch 13 215.75 MHz

Using the weather band

Weather information is given continuously from U.S.
Government Weather Stations on frequencies from
162.4MHz to 162.55MHz.
Weather Band
ch 1 162.550 MHz
ch 2 162.400 MHz
ch 3 162.475 MHz
ch 4 162.425 MHz
ch 5 162.450 MHz
ch 6 162.500 MHz
ch 7 162.525 MHz
Important:
The listening range of NOAA weather
stations varies from 10 miles up to a
maximum of 40 miles from the station's
transmitter. In some areas of the United
States, weather transmissions cannot be
monitored. The effective range of this
radio will have side variations due to the
height of the local transmitting antenna,
atmospheric conditions, and the terrain
between the transmitter and your radio's
location.
12
EN