Cisco 861W - Integrated Services Router Wireless Quick Start Manual page 26

Task 8: Start Using Cisco CP
Creating an Initial Configuration of a Feature
This section provides a procedure for configuring a router interface. It is provided as an example of how
you create an initial configuration of a feature using Cisco CP.
To start, choose the community that the device belongs to, and click OK. The Community View page
Step 1
(Figure
Figure 14
In the Community View page, choose the device that you want to work with, and click Discover.
Step 2
Depending on network conditions, Cisco CP may take several minutes to discover the device. If you
want to work with additional devices in the community, choose them and click Discover.
Cisco Configuration Professional Quick Start Guide
26
14) is displayed.
Community View Page
78-18480-08