Cisco 861W - Integrated Services Router Wireless Quick Start Manual page 17

The Cisco CP Express Overview page appears and then the Cisco CP Express Wizard page is also
Step 4
displayed
Figure 5
The Cisco CP Express wizard will ask you to enter an enable secret password to control access to
Tip
Cisco IOS software. Be sure to write down or remember the enable secret password that you enter. It is
not shown in the Enable Password field or in the Summary window, and it cannot be reset without erasing
the router configuration. You are also asked to change the router's LAN IP address from its default value.
When the Summary window appears, write down the LAN IP address, the username and the user
Step 5
password that you entered, and click Finish. You will need this information to reconnect to the router to
perform additional configuration.
Exit Cisco CP Express and complete
Step 6
reconnect to your router, using the new IP address that you gave to the LAN interface.
78-18480-08
(Figure 5). Click Next to begin configuring the router.
Cisco CP Express Overview and Wizard Pages
"Task 6: Verify the Initial Configuration"
Cisco Configuration Professional Quick Start Guide
Task 5: Run the Cisco CP Express Wizard
to reconfigure the PC and
17