Cisco 861W - Integrated Services Router Wireless Quick Start Manual page 12

Task 4: Connect the PC to the Router
Figure 2
Task 4: Connect the PC to the Router
This task section explains how to cable the PC to the router to perform initial configuration.
Who Should Use this Section
Who Can Skip this Section
Cisco Configuration Professional Quick Start Guide
12
Click Use the following IP address. See
•
Configuring the PC with a Static IP Address
In the IP address field, enter the following IP address:
•
10.10.10.2
In the Subnet mask field, enter the following subnet mask:
•
255.255.255.248
• Click OK to close the dialog.
If you are setting up a new router, and want to use Cisco CP Express to
give the router a basic configuration, use this section.
If you want to use Cisco CP to manage a router that is already in use, you
can skip this section.
Figure 2.
78-18480-08