Cisco 1232AG - Aironet - Wireless Access Point Hardware Installation Manual page 81

Chapter 8 5-GHz Radio Module Upgrade
Note
The 5-GHz radio module installation is now complete and radio settings are at default values. To
configure the 5-GHz radio with your wireless network settings refer to the Cisco IOS Software
Configuration Guide for Cisco Aironet Access Points.
OL-4310-01
If your access point contains an internal 2.4-GHz radio, there is also a 2.4-GHz radio product
compliance label on the back of the unit.
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
Installing a 5-GHz Radio Module
8-7