Appendix; Access Point Specifications - Cisco 1232AG - Aironet - Wireless Access Point Hardware Installation Manual

Access Point Specifications

This appendix provides technical specifications for the Cisco Aironet 1200 Series Access Point.
Table C-1
Table C-1 Access Point Specifications
Category Access Point with 2.4-GHz Radio
Size 6.56 in. W x 7.23 in. D x 1.66 in. H
16.67 cm W x 18.36 cm D x 4.22 cm H
Status Indicators Three indicators on the top panel: Ethernet traffic, status, and radio traffic.
Connectors Back panel (left to right): reverse-TNC antenna connector; power connector (for plug-in AC power
module); RJ-45 connector for 10BASE-T or 100BASE-T Ethernet connections; upside down RJ-45
connector for serial connections; reverse-TNC antenna connector.
Front Panel: Card Bus connector used for the 5-GHz radio module.
Input Voltage 48 VDC nominal. Operational up to 60 VDC. Voltage higher than 60 VDC can damage the unit.
Input Current With 2.4 GHz radio:
The access point is capable of drawing 380 mA depending upon the current radios and future radios
installed in the unit.
Operating Temperature Access point:
1200 series power injector:
Storage Temperature –40 to 185
Weight Without mounting bracket:
OL-4310-01
lists the technical specifications for the access point.
125 mA (typical)
o o
–4 to 131 F (–20 to 55 C)
o o
32 to 104 F (0 to 40 C)
o o
F (–40 to 85 C)
1.6 lbs (0.73 kg) with 2.4-GHz radio
module
A P P E N D I X
Access Point with 5-GHz Radio Module
With the 5-GHz antenna in the patch position:
6.56 in. W x 8.04 in. D x 2.21 in. H
16.67 cm W x 20.42 cm D x 5.61
With 5-GHz radio:
165 mA (typical)
With 2.4-GHz and 5-GHz radios
225 mA (typical)
Access point (with 2.4-GHz and 5-GHz radio):
–4 to 122
1200 series power injector:
32 to 104
o
–40 to 185 F (–40 to 85
Without mounting bracket:
1.87 lbs (0.85 kg) with 5-Ghz radio module
1.97 lbs (0.89 kg) with 5-GHz radio module and
2.4-GHz radio
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
o o
F (–20 to 50 C)
o o
F (0 to 40 C)
o
C)
C
C-1