Cisco 1232AG - Aironet - Wireless Access Point Hardware Installation Manual page 78

Removing a 5-GHz Radio Module
Step 4 Insert your fingers into the base of the 5-GHz radio module (closest to the access point) and pull straight
out from the access point (see
Figure 8-3
Step 5 Fold the antenna down (towards the attached radio card) and insert the module into a static protected bag.
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
8-4
Figure 8-3).
Removing the 5-GHz Radio Module
Chapter 8 5-GHz Radio Module Upgrade
OL-4310-01