Table of Contents
Advertisement
To establish a wireless LAN connection with Manual Connection 1 between
the first computer and the Data Projector
1
On your computer, start up Wireless Connection 2.
If your computer is running Windows Vista, starting up Wireless Connection 2 will cause
the "User Account Control" message to appear. When it does, click "Allow".
If the "Select Network" dialog box like the one shown below appears, click the wireless
LAN adapter you want to use for connection with the Data Projector and then click the
[OK] button.
If your computer is running Windows XP or 2000, do not select the "Connect to an
existing network" check box. See page 39 for more information about using this check
box.
2
Click [Cancel] to close the "Connect" dialog box that appears.
3
On the Wireless Connection 2 window, select [Connection] - [Switch Connection
Profile].
This will display the Switch Connection Profile dialog box.
4
Click the "Profile Name" down arrow button and then select "Manual Connection
1" from the list that appears.
5
Click the [Connect] button.
6
Wait until the "Connect" dialog box like the one shown below appears.
12
Advertisement
Table of Contents
