Using A Simple Connection Profile For A Wireless Lan Connection Between The Data Projector And A Single Computer - Casio YW-2L - Wireless LAN For Projector Connecting Manual

Using a Simple Connection Profile for a Wireless
LAN Connection between the Data Projector and a
Single Computer
The following procedure uses the preset Simple Connection 1 connection profile to
establish a wireless LAN connection between the Data Projector and a single computer for
the first time.
To establish a wireless LAN connection between a single computer and the
Data Projector
1
Turn on the Data Projector.
Wait until the Data Projector's POWER/STANDBY indicator is lit green.
2
Connect the CASIO YW-2 wireless adapter to the Data Projector's USB port.
You also can connect the wireless adapter to the Data Projector before turning on the
Data Projector.
The Data Projector will detect the wireless adapter and start up its Wireless function
automatically. The message shown below will appear in the projection area.
3
Turn on your computer and start up Windows.
4
On your computer, start up Wireless Connection 2.
If your computer is running Windows Vista, starting up Wireless Connection 2 will cause
the "User Account Control" message to appear. When it does, click "Allow".
If the "Select Network" dialog box like the one shown below appears, click the wireless
LAN adapter you want to use for connection with the Data Projector and then click the
[OK] button.
If your computer is running Windows XP or 2000, do not select the "Connect to an
existing network" check box.
Check to make sure that "Simple Connection 1"
is shown.
9