Table of Contents
Advertisement
Establishing a Wireless LAN Connection between the
XJ-S35/YP-100 and a Computer
Note the following precautions when trying to establish a wireless LAN connection between
the XJ-S35/YP-100 and a computer.
The XJ-S35/YP-100 comes with Wireless Connection, which is a previous version of the
wireless connection software. Do not try to perform the procedures in this manual using
the older version of Wireless Connection. Be sure to install Wireless Connection 2, which
is the newest version, on your computer.
The XJ-S35/YP-100 does not have manual connection (page 7) initial values registered.
Before performing the procedures in this manual, it is recommended that you first use the
procedure under "Sending Settings from a Computer to the Data Projector" (page 34) to
send Manual Connection 1, Manual Connection 2, and Manual Connection 3 connection
profile settings from your computer to the projector.
Connection Profiles
The Data Projector has two types of connection profiles named "simple connection" (1, 2,
and 3) and "manual connection" (1, 2, and 3).
You should use a simple connection profile to establish a wireless LAN connection between
the Data Projector and a single computer using initial default settings. You can use a manual
connection profile to change the initial default settings and establish a wireless LAN
connection between the Data Projector and up to four computers.
When you want to do this:
Use a simple connection profile to connect
the Data Projector and one or more
computers
Use a manual connection profile to connect
the Data Projector and one or more
computers
Modify manual connection profile initial
default settings
Refer to this section of this manual:
"Using a Simple Connection Profile for a Wireless LAN
Connection between the Data Projector and a Single
Computer" (page 9)
"Using a Manual Connection Profile for Wireless LAN
Connection between the Data Projector and One or
More Computers" (page 11)
"Advanced Wireless LAN Connection Settings"
(page 20)
7
Advertisement
Table of Contents
