PARTS AND FEATURES Lid Center Cap Base Lid with Vent Well Interlock Jar (1.6 L capacity) START/STOP Button ( ) with LED Ring Glass Jar* (1.4 L capacity) Control Dial *Accessories only included with Glass Jar Blender models.
PRODUCT SAFETY IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. Misuse of appliance may result in personal injury. 2. To protect against risk of electrical shock do not put the Stand Blender Base in water or other liquid.
Page 4
PRODUCT SAFETY 13. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. 14. Refer to the “Care and Cleaning” section for instructions on cleaning the surfaces in contact with food.
PRODUCT SAFETY ELECTRICAL REQUIREMENTS Models: KUA35AVANA, KUA35APANA Voltage: 127 V~ Frequency: 60 Hz Wattage: 1200 W Model: KUA35AVBNA Voltage: 220 V~ Frequency: 60 Hz Wattage: 1200 W Electrical Shock Hazard NOTE: If the plug does not fit in the outlet, contact a qualified electrician. Do Plug into an earthed outlet.
GET STARTED BLENDER FUNCTION GUIDE It features variable speeds (from 1 to 5) and Pulse ( P ) function to customize blending. Also, pre-programmed recipe settings like, Ice Crush ( ), Icy Drink ( ) and, Smoothie ( ) are designed to deliver optimal results.
USING THE BLENDER First, clean all parts and accessories (see “Care and Cleaning” section). Be sure the countertop beneath the Blender and surrounding areas are dry and clean. IMPORTANT: When moving your Blender, always support/lift from the Blender Base. Base will become disengaged from Jar if carried by Blender Jar or Blender Jar handle only. WARNING Electrical Shock Hazard Plug into an earthed outlet.
USING THE BLENDER NOTE: If blending hot liquids and ingredients, start on a low speed and then ramp up to the desired speed. Use variable speed and run for 1-2 minutes. NOTE: Blender will not run if jar is not on Base.
TROUBLESHOOTING GUIDE WARNING Electrical Shock Hazard Plug into an earthed outlet. Do not remove an earth prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, re, or electrical shock. Problem Solution Check to see if the Blender is securely plugged into an...
Need help?
Do you have a question about the KSB4027 Series and is the answer not in the manual?
Questions and answers