Related Manuals for Levoit LVAC-300
Summary of Contents for Levoit LVAC-300
- Page 1 LVAC-300 Cordless Stick Vacuum U S E R M A N UA L Questions or Concerns? Please contact us Mon–Fri, 9:00 am–5:00 pm PST/PDT at support@levoit.com or at 1-888-726-8520.
- Page 2 Table of Contents Specifications Package Contents Model LSV-V202PE-BUS Specifications Safety Instructions Battery Input 21.6V 3,000mAh Getting to Know Your Vacuum Li-ion battery Controls Rated Power 240W* Using Your Vacuum Care & Maintenance Charging Input 100–240V~ 50/60Hz 0.8A Cleaning Dimensions 9.8 x 7.7 x 43.3 in / Storage 25 x 19.5 x 110 cm Troubleshooting...
-
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using this vacuum, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE WARNING – To reduce the risk of fire, electric shock, or injury: • • CAUTION: Risk of injury. Roller brush Use only manufacturer’s may start unexpectedly. - Page 4 • • Always turn the vacuum off before Disconnect the battery pack from connecting or disconnecting the stick, the appliance before making any nozzles, brushes, or vacuum head. adjustments, changing accessories, or storing appliance. Such preventive • Do not vacuum water or any liquids. safety measures reduce the risk of •...
- Page 5 • • When the battery pack is not in Do not expose the battery pack use, keep it away from other metal or vacuum to fire or excessive objects, like paper clips, coins, keys, temperatures. The battery used in this nails, screws, or other small metal device may present a risk of fire objects that can make a connection...
-
Page 6: Getting To Know Your Vacuum
Getting to Know Your Vacuum On/Off Button Lid Release Button Roller Brush Suction Mode Button Dust Bin Release Button Roller Brush Release Button LED Display Vacuum Body Release Button Vacuum Handle Vacuum Body Charger Charging Port (on the battery) Felt Filter 2-in-1 Crevice Tool Screws Foam Filter... -
Page 7: Using Your Vacuum
Controls Using Your Vacuum On/Off Button Build the vacuum stick by aligning the Turns the vacuum on/off. dots on the long stick and short stick, • then push together until they lock in Suction Mode Button place. [Figure 1.1] Cycles through Suction levels: ECO ( ), •... -
Page 8: Nozzle Attachments
NOZZLE ATTACHMENTS Optionally, leave the stick attached to the vacuum body and press the Vacuum Your vacuum comes with nozzle attachments Head Release Button to remove the to help you tackle almost any cleanup job. vacuum head. Then, attach the nozzle attachment to the end of the stick. -
Page 9: Care And Maintenance
Care & Maintenance BATTERY REMOVAL & CHARGING THE VACUUM INSTALLATION Your vacuum uses a 3,000mAh Li-ion battery. Use the included charger to charge the Turn the vacuum off. Press the Battery vacuum. Release Button and remove the battery. To reinstall, slide the battery into the slot Note: in the vacuum body. - Page 10 Care & Maintenance (cont.) Hang the vacuum on the wall mount. [Figure 2.3] Insert the charger into the charging port on the battery. [Figure 2.3] Plug the charger into the outlet. When charging, the battery lights will blink and the display will show the current battery level percentage.
-
Page 11: Emptying The Dust Bin
Empty out debris and dirt, then close the lid. Only charge the battery with the • charger specified by Levoit. Note: Holding the dust bin inside a trash can If you are not using the battery for an • prevents dust from spilling out. - Page 12 Cleaning CLE ANING THE VACUUM BODY Turn the vacuum off. Wipe the outside of the vacuum down with a damp cloth. Allow the vacuum to completely dry before using. Warning: Do not allow water to enter the internal parts or motor of the vacuum. CLE ANING THE DUST BIN &...
- Page 13 Replacement Filters: To maintain the performance of your • Figure 3.3 only vacuum, use official Levoit filters. For more information, contact Customer Support (see page 19). Figure 3.4...
-
Page 14: Hepa Filter
Cleaning (cont.) HEPA FILTER CLE ANING THE ROLLER BRUSH Press the Dust Bin Release Button to Periodically check the roller brush for hair remove the dust bin. [Figure 3.5] or debris. The roller brush will automatically shut off if it is blocked or jammed. Pull out the HEPA filter from the vacuum body. - Page 15 Storage When the vacuum is not in use, store it on the wall mount: Screw the wall mount into the wall near a power outlet (see Charging the Vacuum, page 9). Hang the vacuum on the wall mount. Note: Always store the vacuum on the wall •...
-
Page 16: Troubleshooting
Vacuum is not The charger is not properly plugged in or you are using the wrong charging. charger. Use the provided Levoit charger only (see Charging the Vacuum, page 9). Empty the dust bin and check for blockage inside the vacuum Light flashes. - Page 17 Possible Solution Display shows E0. Make sure you are using the original charger. Use the provided Levoit charger only (see Charging the Vacuum, page 9). Check for foreign objects or liquid in the charging port. Display shows E1. Make sure the battery is installed correctly (see Battery Removal &...
-
Page 18: Warranty Information
• If the unit has been damaged, including but from the online Levoit store, (ii) repair any defects in not limited to damage by animals, lightning, material or workmanship, (iii) replace the product... -
Page 19: Customer Support
AND REGARDLESS OF WHETHER CAUSED BY TORT Tustin, CA 92782, USA (INCLUDING NEGLIGENCE), BREACH OF CONTRACT, OR OTHERWISE. OUR LIABILITY SHALL UNDER NO Email: support@levoit.com CIRCUMSTANCES EXCEED THE ACTUAL AMOUNT Toll-Free: 1-888-726-8520 PAID BY YOU FOR THE DEFECTIVE PRODUCT, NOR... - Page 20 A1_24K06_us...
Need help?
Do you have a question about the LVAC-300 and is the answer not in the manual?
Questions and answers