Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Avalue Technology SPC-2133-B1
Summary of Contents for Avalue Technology SPC-2133-B1
- Page 1 21.5" Apollo Lake SoC Mobile Processor Fanless Stainless Steel Chassis Touch Panel PC with Full IP-66 & IP-69K Quick Reference Guide Ed – 16 December 2024 Copyright Notice Copyright © 2024 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No. E2017S13BA2R...
-
Page 2: Declaration Of Conformity
For detailed information, please always refer to the electronic user's manual. Copyright Notice © 2024 by Avalue Technology Inc. All rights are reserved. No parts of this manual may be copied, modified, or reproduced in any form or by any means for commercial use without the prior written permission of Avalue Technology Inc. -
Page 3: A Message To The Customer
ㆍDescription of your software (operating system, version, application software, etc.) ㆍA complete description of the problem ㆍThe exact wording of any error messages To receive the latest version of the user’s manual; please visit our Web site at: www.avalue.com SPC-2133-B1 Quick Reference Guide... - Page 4 On the other hand, if the new product defect is resulting from incorrect configuration or erroneous use by the user instead of any problem of the hardware itself, the customer will also be requested to pay for relevant handling fees. 4 SPC-2133-B1 Quick Reference Guide...
- Page 5 Lacking detailed statement of fault steps also makes the problem hard to be identified, sometimes resulting in second-time repairs. SPC-2133-B1 Quick Reference Guide...
- Page 6 Product has been altered or its label of the serial number has been torn off. • Product functionality issues resulting from improper use by the user, unauthorized dismantle or alteration, unfit operation environment, improper maintenance, accident 6 SPC-2133-B1 Quick Reference Guide...
- Page 7 If the customer demands an additional maintenance analysis report, a service fee of various level will be charged depending on the warranty status. In case the analysis result shows that the defect attributes to Avalue’s faulty design or process, the analysis fee will be exempted. SPC-2133-B1 Quick Reference Guide...
-
Page 8: Safety Instructions
9. Position the power cord so that people cannot step on it. Do not place anything over the power cord. 10. All cautions and warnings on the equipment should be noted. 11. If the equipment is not used for a long time, disconnect it from the power source to 8 SPC-2133-B1 Quick Reference Guide... - Page 9 The equipment has obvious signs of breakage. 14. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. 15. Equipment intended only for use in a RESTRICTED ACCESS AREA. SPC-2133-B1 Quick Reference Guide...
-
Page 10: Explanation Of Graphical Symbols
A NOTE provides additional information intended to avoid Note inconveniences during operation. Direct current. Alternating current Stand-by, Power on FCC Certification CE Certification Follow the national requirements for disposal of equipment. Stacking layer limit This side up 10 SPC-2133-B1 Quick Reference Guide... - Page 11 Quick Reference Guide Fragile Packaging Beware of water damage, moisture-proof Carton recyclable Handle with care Follow operating instructions of consult instructions for use. SPC-2133-B1 Quick Reference Guide 11...
-
Page 12: Disposing Of Your Old Product
EXPLOSION ou une fuite de liquide ou de gaz inflammable. - UNE BATTERIE soumise à une pression d'air extrêmement basse pouvant entraî ner une EXPLOSION ou une fuite de liquide ou de gaz inflammable. 12 SPC-2133-B1 Quick Reference Guide... -
Page 13: Table Of Contents
1.4.1 Bottom View ........................... 21 1.5 System Dimensions ....................22 Hardware Configuration ..................23 2.1 SPC-2133-B1 connector mapping ................24 2.1.1 Waterproof M12 8-pin (male) for 2 x USB 2.0 (USB) ............24 2.1.2 Waterproof M12 8-pin (male) COM1(RS-232(default)/422/485) (COM) ....... 24 2.1.3... - Page 14 Serial Port Console Redirection ..................59 3.6.2.7 CPU Configuration ......................59 3.6.2.7.1 Socket 0 CPU Information ....................60 3.6.2.7.2 CPU Power Management Configuration ................61 3.6.2.8 Network Stack Configuration ..................... 62 3.6.2.9 CSM Configuration ......................63 14 SPC-2133-B1 Quick Reference Guide...
- Page 15 4.2 Install VGA Driver ....................83 4.3 Install Serial IO Driver ..................... 84 4.4 Install TXE Driver ....................85 4.5 Install Audio Driver (For Realtek ALC662 HD Audio) ..........86 4.6 Install LAN Driver (For Intel I211AT) ............... 87 SPC-2133-B1 Quick Reference Guide 15...
-
Page 16: Getting Started
Before installation, please ensure all the items listed in the following table are included in the package. Item Description Q’ty SPC-2133-B1 Stainless Steel Panel PC Screw for VESA Screw for HDD *Note (Suggestion accessory when adapter needed): ACC-ADP-060N-09R (AC/DC adapter 24V/2.5A 90 Plug Type) E170W050030R (Waterproof M12 DC Cable (M12/3Pin- D2.5DC-Plug 200cm)) - Page 17 Quick Reference Guide Purposes and Applications SPC-2133-B1 is used the Intel® series (Apollo Lake platform), which has stronger Atom performance and lower power consumption. it also inherits from SPC-series strength, Modularized, Flexible Expansion, Reliability and Stability. SPC series have been passed stricter vibration and shock testing. It can be used on extreme environment like manufacture or factory.
-
Page 18: System Specifications
LAN Port 1 x M12 8-pin (male) for LAN with waterproof cover and chain Wireless LAN Antenna Optional Wi-Fi with PCB type antenna with waterproof cover Others 1 x IP66 Air pressure relief valve Mechanical 18 SPC-2133-B1 Quick Reference Guide... - Page 19 3 Test axis : X,Y and Z axis 4 Test time : 30 minutes per each axis 5 IEC 60068-2-64 Test Fh Mechanical Shock 1 Wave from : Half Sine wave Test 2 Acceleration Rate : 10g for operation mode SPC-2133-B1 Quick Reference Guide 19...
- Page 20 -10°C ~ 45°C (14°F ~ 113°F), by flow = 0.5 Temperature Operating Humidity 40°C @ 95% Relative Humidity, Non-condensing Storage Temperature -20°C ~ 60°C (-4°F ~ 140°F) Note: Specifications are subject to change without notice. 20 SPC-2133-B1 Quick Reference Guide...
-
Page 21: System Overview
Waterproof M12 8-pin (male) COM1(RS-232(default)/422/485) Waterproof M12 8-pin (male) for 2 x USB 2.0 Waterproof M12 8-pin (male) for LAN DC IN Waterproof M12 3-pin (male) for DC power POWER System power indicator ALTW Air Vent Value SPC-2133-B1 Quick Reference Guide 21... -
Page 22: System Dimensions
SPC-2133-B1 1.5 System Dimensions (Unit: mm) 22 SPC-2133-B1 Quick Reference Guide... -
Page 23: Hardware Configuration
Quick Reference Guide 2. Hardware Configuration For advanced information, please refer to: 1- EMX-APLP included in this manual. Note: If you need more information, please visit our website: www.avalue.com SPC-2133-B1 Quick Reference Guide 23... -
Page 24: Spc-2133-B1 Connector Mapping
USB1 5V USB2 5V 2.1.2 Waterproof M12 8-pin (male) COM1(RS-232(default)/422/485) (COM) M12 I/O (8-pin) Front View Pin Assignments RS-232/422/485 DCD / 422R+ RXD / 422R- TXD / 422T- / 485- DTR / 422T+ / 485+ 24 SPC-2133-B1 Quick Reference Guide... -
Page 25: Waterproof M12 8-Pin (Male) For Lan (Lan)
M12 I/O (8-pin) Front View Pin Assignments Pin Define LAN1_0+ LAN1_0- LAN1_1+ LAN1_1- LAN1_2+ LAN1_2- LAN1_3+ LAN1_3- 2.1.4 Waterproof M12 3-pin (male) for DC power (DC IN) M12 DC-in(3-pin) Front View Pin Assignments Pin Define SPC-2133-B1 Quick Reference Guide 25... -
Page 26: Emx-Aplp Product Overview
SPC-2133-B1 2.2 EMX-APLP Product Overview 26 SPC-2133-B1 Quick Reference Guide... - Page 27 Quick Reference Guide SPC-2133-B1 Quick Reference Guide 27...
-
Page 28: Emx-Aplp Jumper And Connector List
Label Function Note FAN1 CPU fan connector 4 x 1 wafer, pitch 2.54mm FPT1 Front Panel connector 1 5 x 2 header, pitch 2.54mm FPT2 Front Panel connector 2 5 x 2 header, pitch 2.54mm 28 SPC-2133-B1 Quick Reference Guide... - Page 29 Mini-PCIe connector 1 5 x 2 header, pitch 2.00mm JLPC1 LPC connector PWR1 Power connector 2 x 2 wafer, pitch 4.20mm SATA1/2 Serial ATA connector 1/2 SPWR1/2 SATA Power connector 1/2 4 x 1 wafer, pitch 2.54mm SPC-2133-B1 Quick Reference Guide 29...
- Page 30 DC Power-in connector I2C1 I2C connector 5 x 1 header, pitch 2.00mm HDMI1 HDMI connector LOUT1 Line-out audio jack MIC1 Mic-in audio jack DMIC1 Digital Microphone connector 5 x 1 header, pitch 2.54mm SIM1 SIM card slot 30 SPC-2133-B1 Quick Reference Guide...
-
Page 31: Emx-Aplp Setting Jumpers & Connectors
2.4.2 SATA2/MSATA1 mPCIe slot selector (JMSW1) SATA2 Connector* (SATA2 Connector enabled, MSATA1 slot Disabled) MSATA1 mPCIe slot (MSATA1 slot enabled, SATA2 Connector Disabled) * Default Note: SATA2/MSATA1 shared SATA signal, can not be used simultaneously. SPC-2133-B1 Quick Reference Guide 31... -
Page 32: Lvds Back Light Power Selection (Jsbkl1)
SPC-2133-B1 2.4.3 LVDS Back Light power selection (JSBKL1) PWM Mode*(Max current: 2A) DC Mode(Max current: 2A) * Default 2.4.4 AT/ATX Power Mode Select (JSATX1) ATX* * Default 32 SPC-2133-B1 Quick Reference Guide... -
Page 33: Clear Cmos (Cmos1)
Quick Reference Guide 2.4.5 Clear CMOS (CMOS1) Protect* Clear CMOS * Default 2.4.6 LCD Inverter connector (JBKL1) Signal +12V LVDS_BKLTEN LVDS_BKLADJ SPC-2133-B1 Quick Reference Guide 33... -
Page 34: Serial Port 1/2 Connector (Com1/2)
SPC-2133-B1 2.4.7 Serial port 1/2 connector (COM1/2) COM1 COM2 Signal PIN PIN Signal 2.4.8 Serial port 3/4/6 connector (COM3/4/6) Signal PIN PIN Signal 34 SPC-2133-B1 Quick Reference Guide... -
Page 35: Serial Port 5 Connector (Com5)
Quick Reference Guide 2.4.9 Serial port 5 connector (COM5) Signal PIN PIN Signal NDCD# NRXD NTXD NDTR# NDSR# NRTS# NCTS# NRI# 2.4.10 Serial Port 1 RS485/422 Mode connector (JRS485) Signal PIN PIN Signal 485TX- 422RX- 485TX+ 422RX+ SPC-2133-B1 Quick Reference Guide 35... -
Page 36: General Purpose I/O Connector (Dio1)
SPC-2133-B1 2.4.11 General purpose I/O connector (DIO1) Signal PIN PIN Signal SMB_CLK SMB_DATA 2.4.12 SATA Power connector 1/2 (SPWR1/2) SPWR1 SPWR2 Signal +V5S_SATA +V12S_SATA 36 SPC-2133-B1 Quick Reference Guide... -
Page 37: Power Connector (Pwr1)
Quick Reference Guide 2.4.13 Power connector (PWR1) Signal Signal +V12-24_DCIN +V12-24_DCIN 2.4.14 USB2.0 connector (USB3) Signal Signal +5VSB +5VSB USBDN4 USBDN5 USBDP4 USBDP5 SPC-2133-B1 Quick Reference Guide 37... -
Page 38: Usb2.0 Connector (Usbh1)
SPC-2133-B1 2.4.15 USB2.0 connector (USBH1) Signal Signal +5VSB +5VSB USB_HDN1 USB_HDN2 USB_ HDP1 USB_ HDP2 2.4.16 USB2.0 connector (USBH2) Signal USB_ HDP4 USB_HDN4 +5VSB 38 SPC-2133-B1 Quick Reference Guide... -
Page 39: Lvds Connector (Lvds1)
LVDS_DATAN1 11 12 LVDS_DATAN0 LVDS_DATAP3 15 16 LVDS_DATAP2 LVDS_DATAN3 17 18 LVDS_DATAN2 LVDS_DATAP5 21 22 LVDS_DATAP4 LVDS_DATAN5 23 24 LVDS_DATAN4 LVDS_DATAP7 27 28 LVDS_DATAP6 LVDS_DATAN7 29 30 LVDS_DATAN6 LVDS_CLK2P LVDS_CLK1P LVDS_ CLK2N LVDS_ CLK1N +12V +12V SPC-2133-B1 Quick Reference Guide 39... -
Page 40: Battery Connector (Bt1)
Front Audio connector (FAUD1) Signal PIN PIN Signal LINE2_JD LINE2_L SENSE_B MIC2_JD LINE2_R AUD_FRONT_DET MIC2_R MIC2_L 2.4.19.1 Signal Description –Front Audio connector (FAUD1) Signal Signal Description LINE2_JD AUDIO IN (LINE_RIN/LIN)sense pin MIC2_JD MIC IN (MIC_RIN/LIN) sense pin 40 SPC-2133-B1 Quick Reference Guide... -
Page 41: Lpc Connector (Jlpc1)
Quick Reference Guide 2.4.20 LPC connector (JLPC1) Signal PIN PIN Signal LPC_AD0 +3.3V LPC_AD1 PLT_RST# LPC_AD2 LPC_FRAME# LPC_AD3 LPC_CLK_DEB LPC_SERIRQ 2.4.21 EC_Program (EC1) Signal PIN PIN Signal +3.3A_ECSPI EC_FSCE# EC_FSCK EC_FSMIOSO EC_FSMOSI EC_HOLD# EC_SMBCLK EC_SMBDATA SPC-2133-B1 Quick Reference Guide 41... -
Page 42: Spi Connector (Spi1)
SPC-2133-B1 2.4.22 SPI connector (SPI1) Signal PIN PIN Signal +1.8VSB SPI_CS0# SPI_CLK SPI_MISO SPI_MOSI SPI_HOLD# 2.4.23 Sony/Philips Digital Interface (SPDIF1) Signal SPDIF_OUT 42 SPC-2133-B1 Quick Reference Guide... -
Page 43: Speaker Connector (Spk1)
Quick Reference Guide 2.4.24 Speaker connector (SPK1) Signal RSPK- RSPK+ LSPK- LSPK+ 2.4.25 Front Panel connector 1 (FPT1) Signal PIN PIN Signal +HD_LED +PWR_LED -HD_LED -PWE_LED +Reset +PWR_BNT -Reset -PWR_BNT SPC-2133-B1 Quick Reference Guide 43... -
Page 44: Front Panel Connector 2 (Fpt2)
2. BLK_UP with GND/BLK_DN with GND: Step control LVDS Backlight by use button and BIOS must to be set “BR Button”. (Please refer to page.58) 2.4.27 LED indicator connector 1 (LED1) Signal L1_1000#_LED L1_100#_LED L1_ACT_N L1_ACT_P 44 SPC-2133-B1 Quick Reference Guide... -
Page 45: Led Indicator Connector 2 (Led2)
Quick Reference Guide 2.4.28 LED indicator connector 2 (LED2) Signal L2_1000#_LED L2_100#_LED L2_ACT_N L2_ACT_P 2.4.29 CPU fan connector (FAN1) Signal +12V CPU_FANIN CPU_FANOUT SPC-2133-B1 Quick Reference Guide 45... -
Page 46: Digital Microphone Connector (Dmic1)
SPC-2133-B1 2.4.30 Digital Microphone connector (DMIC1) Signal DMIC_CLK DMIC_DAT +3.3VSB 2.4.31 eDP connector (EDP1) Signal PIN PIN Signal EDP_TXN0 EDP_TXN3 EDP_TXP0 EDP_TXP3 EDP_TXN1 EDP_TXP1 EDP_AUXN EDP_AUXP EDP_TXN2 EDP_TXP2 EDP_C_HPD EDP_VCC_PAL 19 20 EDP_VCC_PAL 46 SPC-2133-B1 Quick Reference Guide... -
Page 47: I2C Connector (I2C1)
Quick Reference Guide 2.4.32 I2C connector (I2C1) Signal +3.3V I2C5_INT# I2C5_LS_CLK I2C5_LS_DATA SPC-2133-B1 Quick Reference Guide 47... -
Page 48: Bios Setup
SPC-2133-B1 3.BIOS Setup 48 SPC-2133-B1 Quick Reference Guide... -
Page 49: Introduction
If you do not press the keys at the correct time and the system does not boot, an error message will be displayed and you will again be asked to. Press F1 to Continue, DEL to enter SETUP SPC-2133-B1 Quick Reference Guide 49... -
Page 50: Using Setup
Note: Some of the navigation keys differ from one screen to another. • To Display a Sub Menu Use the arrow keys to move the cursor to the sub menu you want. Then press <Enter>. A “➢” pointer marks all sub menus. 50 SPC-2133-B1 Quick Reference Guide... -
Page 51: Getting Help
BIOS Vendor and your systems manufacturer to provide the absolute maximum performance and reliability. Even a seemingly small change to the chipset setup has the potential for causing you to use the override. SPC-2133-B1 Quick Reference Guide 51... -
Page 52: Bios Setup
<Enter> to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. 52 SPC-2133-B1 Quick Reference Guide... -
Page 53: System Language
Visit the Avalue website (www.avalue.com) to download the latest product and BIOS information. 3.6.2 Advanced Menu This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus. SPC-2133-B1 Quick Reference Guide 53... -
Page 54: Trusted Computing
INT1Ainterface will not be available. 3.6.2.2 ACPI Settings Item Options Description Enables or Disables System ability to Disabled Enable Hibernation Hibernate (OS/S4 Sleep State). This Enabled[Default], option may be not effective with some 54 SPC-2133-B1 Quick Reference Guide... -
Page 55: It8528 Super Io Configuration
You can use this item to set up or change the IT8528 Super IO configuration for serial ports. Please refer to 3.6.2.3.1 for more information. Item Description Serial Port 1 Configuration Set Parameters of Serial Port 1 (COMA). SPC-2133-B1 Quick Reference Guide 55... -
Page 56: Serial Port 1 Configuration
Enable or Disable Serial Port (COM). Disabled UART 232[Default], UART 232 422 485 UART 422, Change the Serial Port as RS232/422/485. UART 485 3.6.2.4 H/W Monitor Item Options Description Enabled, Smart Fan Function Enable or Disable Smart Fan. Disabled[Default] 56 SPC-2133-B1 Quick Reference Guide... -
Page 57: Smart Fan Mode Configuration
02/Mode 03/Mode 04/Mode 05/Mode 06/Mode CPU Smart Fan Mode 07/Mode 08/Mode 09/Mode 10/Mode 11/Mode CPU Smart Fan Mode Select. 12/Mode 13/Mode 14/Mode 15/Mode 16/Mode 17/Mode 18/Mode 19/Mode 20 Fan PWM 0-255 Fan PWM duty. 3.6.2.5 S5 RTC Wake Settings SPC-2133-B1 Quick Reference Guide 57... - Page 58 15 for 3pm. Select 0-23 For example enter 3 for 3am and Wake up minute 0-23 15 for 3pm. Select 0-23 For example enter 3 for 3am and Wake up second 0-23 15 for 3pm. 58 SPC-2133-B1 Quick Reference Guide...
-
Page 59: Serial Port Console Redirection
Quick Reference Guide 3.6.2.6 Serial Port Console Redirection Item Options Description Disabled[Default], Console Redirection Console Redirection Enable or Disable. Enabled 3.6.2.7 CPU Configuration Use the CPU configuration menu to view detailed CPU specification and configure the CPU. SPC-2133-B1 Quick Reference Guide 59... -
Page 60: Socket 0 Cpu Information
Disabled, Thermal Monitor Enable/Disable Thermal Monitor. Enabled[Default] Disabled, Monitor Mwait Enabled Enable/Disable Monitor Mwait. Auto[Default] HW_ALL[Default] P-STATE Coordination SW_ALL Change P-STATE Coordination type. SW_ANY Disabled[Default], Enable/Disable Digital Thermal Sensor. Enabled 3.6.2.7.1 Socket 0 CPU Information 60 SPC-2133-B1 Quick Reference Guide... -
Page 61: Cpu Power Management Configuration
This option controls the Max Core C State that Max Core C State Core C7 cores will support. Core C6 Core C1 Unlimited Disabled C-State Auto Demotion Configure C-State Auto Demotion. C1[Default] Disabled C-State Un-demotion Configure C-State Un-demotion. C1[Default] SPC-2133-B1 Quick Reference Guide 61... -
Page 62: Network Stack Configuration
IPV6 HTTP boot option will not be created. Wait time to press ESC key to abort the PXE PXE boot wait time boot. Number of times presence of media will be Media detect count checked. 62 SPC-2133-B1 Quick Reference Guide... -
Page 63: Csm Configuration
Network UEFI PXE OpROM. Legacy Do not launch[Default] Controls the execution of UEFI and Legacy Storage UEFI Storage OpROM. Legacy Do not launch Controls the execution of UEFI and Legacy Video UEFI Video OpROM. Legacy[Default] SPC-2133-B1 Quick Reference Guide 63... -
Page 64: Nvme Configuration
Determines OpROM execution policy for Other PCI devices UEFI devices other than Network, Storage, or Legacy[Default] Video. 3.6.2.10 NVMe Configuration 3.6.2.11 USB Configuration The USB Configuration menu helps read USB information and configures USB settings. 64 SPC-2133-B1 Quick Reference Guide... -
Page 65: Security Configuration
Root port it is 100ms, for a Hub port the delay is taken form Hub descriptor. 3.6.2.12 Security Configuration Item Options Description Enabled, TXE HMRFPO TXE HMRFPO. Disabled[Default] Enabled[Default], TXE EOP Message Send EOP Message Before Enter OS. Disabled SPC-2133-B1 Quick Reference Guide 65... -
Page 66: System Component
SPC-2133-B1 3.6.2.13 System Component Item Options Description Warm Reset OS Reset Select Select the reset type in FACP table. Cold Reset[Default] 3.6.3 Chipset 66 SPC-2133-B1 Quick Reference Guide... -
Page 67: North Bridge
2.25 GB Max TOLUD Maximum Value of TOLUD. 2.5 GB 2.75 GB Enable/Disable above 4GB MemoryMappedIO Above 4GB MMIO BIOS Enabled, BIOS assignment. This is disabled assignment Disabled[Default] automatically when Aperture Size is set to 2048MB. SPC-2133-B1 Quick Reference Guide 67... -
Page 68: South Bridge
SPC-2133-B1 3.6.3.2 South Bridge Item Option Description Quiet Serial IRQ Mode Configure Serial IRQ Mode. Continuous[Default] Windows[Default] OS Selection Android Select the target OS. Intel Linux 3.6.3.3 Uncore Configuration 68 SPC-2133-B1 Quick Reference Guide... - Page 69 BR Button Brightness Control Method 2.Brightness Button 3.Variable Resistor 4.OS Driver. OS Driver LVDS Back Light PWM Select LVDS back light PWM duty. 100%[Default] 200[Default] LVDS Back Light PWM Select LVDS back light PWM Frequency. Frequency SPC-2133-B1 Quick Reference Guide 69...
-
Page 70: South Cluster Configuration
SPC-2133-B1 3.6.3.4 South Cluster Configuration 3.6.3.4.1 HD-Audio Configuration Item Option Description Disable[Default] HD-Audio Support Enable/Disable HD-Audio Support. Enable 11db 14db[Default] AMP Gain Setting Select AMP Gain db. 19db 25db 70 SPC-2133-B1 Quick Reference Guide... -
Page 71: Pci Express Configuration
Quick Reference Guide 3.6.3.4.2 PCI Express Configuration Item Option Description Disable[Default] Compliance Mode Compliance Mode Enable/Disable. Enable PCIe slot PCIe port5-Slot or M.2 select PCIe port5 mapping to PCIe slot or M.2. M.2[Default], SPC-2133-B1 Quick Reference Guide 71... -
Page 72: Pci Express Root Port 3(I210/211)
Disable[Default] PCI Express Active State Power ASPM Management settings. L0sL1 Auto Disabled[Default] L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2 Auto[Default] PCIe Speed Gen 1 Configure PCIe Speed. Gen 2 72 SPC-2133-B1 Quick Reference Guide... -
Page 73: Pci Express Root Port 5(M.2/Pcie Slot)
Disable[Default] PCI Express Active State Power ASPM Management settings. L0sL1 Auto Disabled[Default] L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2 Auto[Default] PCIe Speed Gen 1 Configure PCIe Speed. Gen 2 SPC-2133-B1 Quick Reference Guide 73... -
Page 74: Pci Express Root Port 6(Mpcie)
Disable[Default] PCI Express Active State Power ASPM Management settings. L0sL1 Auto Disabled[Default] L1.1 L1 Substates PCI Express L1 Substates settings. L1.2 L1.1 & L1.2 Auto[Default] PCIe Speed Gen 1 Configure PCIe Speed. Gen 2 74 SPC-2133-B1 Quick Reference Guide... -
Page 75: Sata Drives
Identify the SATA port is connected to Solid SATA Device Type Solid State Drive State Driver or Hard Disk Drive. Disabled[Default] Enable/Disable SATA Port 0/1 DevSlp. Board SATA Port 0/1 DevSlp Enabled rework for LP needed before enable. SPC-2133-B1 Quick Reference Guide 75... -
Page 76: Scc Configuration
SPC-2133-B1 3.6.3.4.4 SCC Configuration Item Option Description Disable[Default], SCC eMMC Support (D28:F0) Enable/Disable SCC eMMC Support. Enable 3.6.3.4.5 USB Configuration Item Option Description Disable[Default], Enable/Disable XHCI Pre-Boot Driver XHCI Pre-Boot Driver Enable Support. 76 SPC-2133-B1 Quick Reference Guide... -
Page 77: Dmi
Quick Reference Guide 3.6.3.6 DMI Item Option Description Disable[Default], SHOW DMI INF0 SHOW DMI INF0 Enable 3.6.4 Security SPC-2133-B1 Quick Reference Guide 77... -
Page 78: Secure Boot
Secure Boot Mode –Custom_Standard, Set UEFI Secure Secure Boot Standard Boot Mode to STANDARD mode or CUSTOM mode or Customization Custom[Default] CUSTOM mode, this change is effect after save. And after reset, the mode will return to STANDARD mode. 78 SPC-2133-B1 Quick Reference Guide... -
Page 79: Boot
1~ 65535 activation key. 65535(0xFFFF) means indefinite waiting. On[Default] Bootup NumLock State Select the Keyboard NumLock state Disabled[Default] Quiet Boot Enables or disables Quiet Boot option Enabled Boot Option #1 Set the system boot order. SPC-2133-B1 Quick Reference Guide 79... -
Page 80: Save And Exit
This option restores all BIOS settings to the factory default. This option is useful if the controller exhibits unpredictable behavior due to an incorrect or inappropriate BIOS setting. 3.6.6.4 Launch EFI Shell from filesystem device Attempts to Launch EFI Shell application (Shellx64.efi) from one of the available filesystem devices. 80 SPC-2133-B1 Quick Reference Guide... -
Page 81: Drivers Installation
Quick Reference Guide 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen. SPC-2133-B1 Quick Reference Guide 81... -
Page 82: Install Chipset Driver
Windows 10 operation system. If the warning message appears while the installation process, click Continue to go on. Step 3. Click Install. Step 4. Click Finish to complete setup. Step1. Click Next. Step 2. Click Accept. 82 SPC-2133-B1 Quick Reference Guide... -
Page 83: Install Vga Driver
Continue to go on. Step 3. Click Next. Step 1. Click Next to continue installation. Step 4. Click Next. Step 5. Click Finish to complete setup. Step 2. Click Yes to accept license agreement. SPC-2133-B1 Quick Reference Guide 83... -
Page 84: Install Serial Io Driver
Continue to go on. Step 3. Click Next. Step 4. Click Next. Step 1. Click Next to continue setup. Step 5. Click Finish to complete the Step 2. Click Next. setup. 84 SPC-2133-B1 Quick Reference Guide... -
Page 85: Install Txe Driver
If the warning message appears while the installation process, click Continue to go on. Step 3. Click Next. Step 4. Click Finish to complete the setup. Step 1. Click Next to continue setup. Step 2. Click Next. SPC-2133-B1 Quick Reference Guide 85... -
Page 86: Install Audio Driver (For Realtek Alc662 Hd Audio)
Windows 10 operation system. If the warning message appears while the installation process, click Continue to go on. Step1. Click Next to Install. Step 2. Select Finish to complete Installation. 86 SPC-2133-B1 Quick Reference Guide... -
Page 87: Install Lan Driver (For Intel I211At)
If the warning message appears while the installation process, click Continue to go on. Step 3. Click Next. Step 4. Click Next. Step 1. Click Install Drivers and Software. Step 5. Click Yes. Step 2. Click Next. SPC-2133-B1 Quick Reference Guide 87... - Page 88 SPC-2133-B1 Step 6. Click Install. Step 7. Click Finish to complete setup. 88 SPC-2133-B1 Quick Reference Guide...
Need help?
Do you have a question about the SPC-2133-B1 and is the answer not in the manual?
Questions and answers